Moxa VPort P06-1MP-M12-CAM60 [50/65] Digital ptz

VPort P06-1MP-M12 System Configuration

4-28

Digital PTZ

Before using digital PTZ, first enable it on the Digital PTZ page:

Once Digital PTZ is enabled, click Show PTZ Control Panel from the IP camera home page. Click the “+”

button in the bottom right of the page to use the digital zoom function. After zooming in, you can then use the

wheel shown below to navigate the camera image.

NOTE

The direction button in the wheel will not be displayed until a digital zoom is performed. Once the camera image

is zoomed out to its original size, the direction button will disappear.

NOTE

The VPort P06

-1MP-

M12 supports up to 4x digital zoom. Press the “+” button to view a 2x zoomed image, and

twice to view a 4x zoomed image.

DynaStream

DynaSteam

is a unique and innovative function that allows for adaptive frame rates in response to events on

the network, such as event triggers and system commands. When network traffic becomes congested,

DynaStream™ allows VPort products to respond to CGI, SNMP, and Modbus commands from SCADA systems

(as well as the MxNVR-MO4’s VMD, DI, CGI events, and video loss triggers), and automatically decrease the

frame rates to reduce bandwidth consumption. This reserves bandwidth for the SCADA system to maintain

Quality of Service (QoS) and guarantees that the SCADA performance will not be impacted by video traffic. For

example, the frame rate can be set to low during regular streaming to reduce bandwidth usage and

automatically switch to a high frame rate during triggered events to ensure quick transmission of critical video

data or video streams, or to provide detailed visual images for problem analysis.

NOTE

To enable the DynaStream function from CGI commands and Modbus TCP, refer to the CGI Commands User’s

Manual for VPo

rt SDK PLUS.