Moxa VPort P06-1MP-M12-CAM60-CT [33/83] Vport onvif profile s system configuration

VPort ONVIF Profile S System Configuration

4-16

The VLC media player is used here as an example of an RTSP streaming application:

Step 1:

Open

VLC Player and select Media - Open network streaming

Step 2:

When the following pop

-up window appears, type the URL in the input box. E.g., type

rtsp://<VPort’s IP address>[:<RTSP Port]/live?pf=<profile ID>&pt=udp

rtsp://<VPort’s IP address>[:<RTSP

Port]/live?pf=<profile ID>&pt=multicast

RTSP Port: 554

(the default),

and then click

OK to connect to the VPort.

Step 3:

Wait a few seconds for

VLC Player to establish the connection.

NOTE

For some old

er firmware versions (versions before the supported versions listed on page 1-2), use

the RTSP

stream URL

s shown below:

rtsp://<VPort’s IP address>[:<RTSP Port]/udpstream_ch1_stream< 1 or 2>

rtsp://<VPort’s IP address>[:<RTSP Port]/multicaststream_ch1_stream<1 or 2>

RTSP Port: 554 (the

default)

For the new firmware version

s (versions after the supported versions listed on page 1-

2), both kinds of RTSP

URL are valid. There is no need to change the RTSP URL design if your software is using the old RTSP URL.