Moxa VPort P06-1MP-M12-CAM60-CT [60/83] Vport onvif profile s system configuration

VPort ONVIF Profile S System Configuration

4-43

PTZ config content

Setting Description Default

Config Name Configure the name of these PTZ settings PTZConfig01

Camera ID ID of the PTZ camera. 1

Pan Speed Speed of the PAN motion Depends on VPort model

Tilt Speed Speed of the TILT motion Depends on VPort model

Zoom Speed Speed of the Zoom motion Depends on VPort model

Timeout Configure the timeout period when there is no response

after a command is sent

Depends on VPort model

PAN/TILT calibrating (only supported by VPort PTZ cameras)

The PAN/TILT position may shift due to mechanical reasons after the camera has been in operation for a long

time, especially in high vibration environments. For this reason, the PAN/TILT setting must be precisely

calibrated. The VPort can be configured to use automatic PAN/TILT calibration that operates on a preset

schedule, or the VPort can be calibrated manually.

Setting Description Default

Auto calibrating Enable PAN/TILT calibrating based on the configured

interval.

Disable

Manual Calibrating PAN/TILT calibrated manually

Set Up Custom Commands (not supported by all VPort models)

VPort products provide 24 custom commands, in addition to the general pan, tilt, zoom, and preset functions,

which are also shown on the PTZ Control Panel. Administrators can click on Setup Custom Commands to

configure the commands, and refer to the manual enclosed with the attached PTZ camera to set up

frequently-used functions. Commands should be entered in ASCII format. The VPort will translate the

commands into binary code and then send the data out through the serial port. For instance, the text string

8101ABCDEF will be translated into five bytes of hexadecimal: 81, 01, AB, CD, and EF. The maximum length of

a command string is 60, which is equivalent to 30 hexadecimal bytes. The Display string is for the text on the

command buttons and should be fewer than 8 characters. If Custom Camera is selected, more PTZF commands

will be available.