Moxa VPort P06-1MP-M12-CAM60-CT [64/83] Ethernet
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Moxa VPort P06-1MP-M12-CAM60-CT [64/83] Ethernet

Moxa VPort P06-1MP-M12-MIC-CAM36-CT-T [64/83] Ethernet
VPort ONVIF Profile S System Configuration
4-47
Control mode
The VPort supports 2 PTZ control modes: “Transparent PTZ” control and “PTZ driver.”
• Transparent PTZ Control (only for VPort encoders):
Select Transparent PTZ Control to control the PTZ camera with a legacy PTZ control panel or joystick
connected to the CCTV system. The application is illustrated in the following figures.
In Transparent PTZ Control mode, the serial data from the legacy PTZ control panel or joystick will be
transformed into IP packets for transmission over a TCP/IP network, and once the VPort video encoder
receives these IP packets, the PTZ control commands will be transformed back to serial data format for
controlling the PTZ camera’s action. You do not need to install a PTZ driver to control the PTZ camera’s
action, which means that a large variety of different PTZ cameras can be used with the VPort video encoders
and their supported PTZ control panel or joystick.
NOTE
The legacy PTZ control panel or joystick should be connected to the VPort’s PTZ port or the COM port of a PC.
But, when it is connected to a PC’s COM port, you will need to install a real COM driver on the PC and map the
COM ports. For detailed information, refer to the VPort SDK PLUS
-
ActiveX Control SDK for the Real COM driver
and COM port mapping function sample codes. You can download this SDK from Moxa’s website
(www.moxa.com).
Specific PTZ Driver:
A PTZ driver is usually required to control a PTZ camera over a TCP/IP network. This is because each PTZ
camera supplier has their own proprietary PTZ control protocol. VPort video encoders support all popular PTZ
drivers for controlling PTZ cameras.
Setting Description Default
Control Mode Select the PTZ control mode in Transparent PTZ Control or
PTZ Driver
PTZ driver
The configurations described below are only available in PTZ Driver mode.
Port Settings
Setting Description Default
Baud rate (bps) The baud rate specified by the PTZ camera’s serial
communication specs.
2400
Data bits
The parameters used to define the serial communication.
8
Stop bits 1
Parity bits None
(Real COM driver required)
PTZ camera
Joystick and
control panel
RS-485
VPort 461
Video Encoder
Ethernet
PC RS-232 or RS-485
VPort D361
Video Decoder

Содержание

Похожие устройства

Скачать