Moxa VPort P16-1MP-M12-CAM36-CT-T [59/64] Step 3 select the corresponding actions

VPort ONVIF Profile S System Configuration

4-44

Tamper (not supported by all VPorts)

Settings Description Default

Channel Number Select the video source. Currently, VPort IP cameras only have

one video source.

videoSrccfg01

State Enable (true) or disable (false) the Tamper trigger true

Link Status

Settings Description Default

Token Select the Ethernet port number. Some VPorts

have 2 Ethernet

ports.

Eth0

Link Configure the trigger to Linkdown or Linkup Linkdown

NOTE

When the

Ethernet link is down, you will not be able to access the VPort via the IP network. In this case,

the the

local relay output

will be active, and video can be recorded on the VPort’s SD card.

Step 3: Select the corresponding actions.

After the triggers are configured, you need to select corresponding trigger actions. In the example shown below,

there are 2 actions: event 1 and event 2. For each trigger, either one or both of the actions can be selected as

the corresponding trigger action.