Moxa VPort 364A-S-SC [17/88] Vport 364a getting started

VPort 364A Getting Started

3-4

100 Mbps NETWORK LED blinks. The IP address assigned after the POST is completed depends on the network

environment.

Network Environment with a DHCP Server

In this case, the IP address of the VPort 364A is assigned by a DHCP Server. Use the DHCP Server’s IP address

table, or use the Moxa VPort utility to determine the IP address that was assigned by the DHCP Server.

NOTE

After powering on the VPort 364A, wait a few seconds for the POST (Power On Self Test) to run. The IP address

will be assigned when the 10 or 100 Mbps NETWORK LED blinks.

Using the Moxa Ethernet Switch And Video Server Configuration Utility (edscfgui.exe), as described

below:

1. Run the edscfgui.exe program to search for the VPort and EDS switches. After the Utility window opens,

you may also select or click on Broadcast Search, which is located under the List Server menu, to initiate a

search (note that you can also click on the Broadcast Search icon to initiate a search.

NOTE

You may download the Moxa Ethernet Switch And Video Server Configuration Utility (edscfgui.exe) software

from Moxa’s website at www.moxa.com.

2. The Broadcast Search window will show a list of all switches and VPort located on the network. The

progress of the search will also be displayed.