D-Link DWS-3024 [162/352] Ap database

CLI Command Reference

Software Version Version of switch software on the peer switch.

Protocol Version Protocol version of switch software on the peer switch.

Discovery Reason Method for peer switch discovery.

Age Time since last update was received from the switch.

Local Access Point Database Commands

The commands in this section provide configuration of the local valid AP database. These

configurations may also be performed on an external RADIUS server.

ap database

This command adds an AP to the local valid AP database (if not already present) and enters

the AP configuration mode identified by the AP MAC address. In AP configuration mode,

you can configure parameters for each individual valid AP. If a valid AP is already being

managed by the switch, you need to reset the AP to pick up any configuration changes in the

valid AP database. The valid AP database parameters are read only when the AP is validated

during discovery. It displays data on the following ports: AP Database, Managed AP, Rogue

AP, and Standalone AP. A summary of the different types of APs that can be displayed on the

local AP database is as follows:

MAC Address Location AP Mode Profile

-------------------- -------------------------------- ------------- ------------

00:11:22:33:45:67 test ws-managed 1-Default

00:23:34:56:54:76 dev standalone 1-Default

Format

ap database <macaddr>

Mode Wireless Config

macaddr MAC address of a physical AP.

no ap database

The no version of this command deletes the AP from the local database.

Format

no ap database <macaddr>

Mode Wireless Config

mode (AP Config Mode)

This command configures the managed mode for an AP.

Default ws-managed

Format

mode {ws-managed | standalone | ack-rogue}

Mode AP Config