![D-Link DWS-3024 [319/352] No snmp server community ipmask](/img/pdf.png)
D-Link DWS-3024 [319/352] No snmp server community ipmask
![D-Link DWS-3024 [319/352] No snmp server community ipmask](/views2/1203449/page319/bg13f.png)
SNMP Commands 319
7 Management Commands
Format snmp-server community ipaddr <ipaddr> <name>
Mode Global Config
no snmp-server community ipaddr
This command sets a client IP address for an SNMP community to 0.0.0.0. The name is the
applicable community name.
Format
no snmp-server community ipaddr <name>
Mode Global Config
snmp-server community ipmask
This command sets a client IP mask for an SNMP community. The address is the associated
community SNMP packet sending address and is used along with the client IP address value to
denote a range of IP addresses from which SNMP clients may use that community to access
the device. A value of 255.255.255.255 will allow access from only one station, and will use
that machine's IP address for the client IP address. A value of 0.0.0.0 will allow access from
any IP address. The name is the applicable community name.
Default 0.0.0.0
Format
snmp-server community ipmask <ipmask> <name>
Mode Global Config
no snmp-server community ipmask
This command sets a client IP mask for an SNMP community to 0.0.0.0. The name is the
applicable community name. The community name may be up to 16 alphanumeric characters.
Format
no snmp-server community ipmask <name>
Mode Global Config
snmp-server community mode
This command activates an SNMP community. If a community is enabled, an SNMP manager
associated with this community manages the switch according to its access right. If the
community is disabled, no SNMP requests using this community are accepted. In this case the
SNMP manager associated with this community cannot manage the switch until the Status is
changed back to Enable.
Default private and public communities - enabled
other four - disabled
Format
snmp-server community mode <name>
Mode Global Config
Содержание
- Cli command reference 1
- Dwl 3500ap 8500ap 8600ap 1
- Dws 3000 series 1
- Command syntax 23 command conventions 24 common parameter values 24 slot port naming convention 25 using the no form of a command 26 command modes 26 command completion and abbreviation 30 cli error messages 30 cli line editing conventions 30 using cli help 31 accessing the cli 32 3
- Document audience 22 product concept 22 3
- List of tables 21 about this book 22 3
- Port configuration commands 34 3
- Spanning tree protocol stp commands 38 3
- Switching commands 33 3
- Table of contents 3
- Using the command line interface 23 3
- Vlan commands 49 4
- Double vlan commands 61 5
- Garp commands 65 5
- Gmrp commands 69 5
- Gvrp commands 67 5
- Port based network access control commands 71 5
- Protected ports commands 63 5
- Provisioning ieee 802 p commands 63 5
- Port channel lag 802 ad commands 88 6
- Port mirroring 93 6
- Static mac filtering 94 6
- Storm control commands 82 6
- Denial of service protection commands 112 7
- Igmp snooping configuration commands 96 7
- Lldp 802 ab commands 106 7
- Port security commands 103 7
- Address resolution protocol arp commands 117 8
- Ip routing commands 122 8
- Mac database commands 115 8
- Routing commands 17 8
- Virtual lan routing commands 129 8
- Virtual router redundancy protocol commands 130 8
- Dhcp and bootp relay commands 135 9
- Routing information protocol commands 137 9
- Peer unified switch commands 161 10
- Unified switch channel and power commands 156 10
- Unified switch commands 146 10
- Wireless commands 45 10
- Access point profile commands 176 11
- Local access point database commands 162 11
- Wireless network commands 165 11
- Access point profile qos commands 192 12
- Access point profile rf commands 182 12
- Access point profile vap commands 195 12
- Switch managed access point commands 196 12
- Access point failure status commands 206 13
- Captive portal configuration commands 218 13
- Captive portal global commands 213 13
- Client association status and statistics commands 208 13
- Client failure and ad hoc status commands 211 13
- Rf scan access point status commands 207 13
- Captive portal client connection commands 223 14
- Captive portal interface commands 225 14
- Captive portal local user commands 226 14
- Captive portal status commands 221 14
- Captive portal user group commands 230 14
- Dual image commands 234 14
- Power over ethernet commands 231 14
- Utility commands 31 14
- Logging commands 247 15
- Simple network time protocol sntp commands 255 15
- System information and statistics commands 235 15
- System utility and clear commands 251 15
- Class of service cos commands 273 16
- Dhcp filtering 271 16
- Dhcp server commands 260 16
- Quality of service qos commands 73 16
- Time zone and daylight savings time commands 259 16
- Differentiated services diffserv commands 277 17
- Diffserv class commands 279 17
- Diffserv policy commands 283 17
- Diffserv service commands 287 17
- Diffserv show commands 288 17
- Console port access commands 302 18
- Ip access control list acl commands 295 18
- Mac access control list acl commands 292 18
- Management commands 99 18
- Network interface commands 299 18
- Secure shell ssh command 307 18
- Telnet commands 303 18
- Access commands 314 19
- Hypertext transfer protocol http commands 309 19
- Snmp commands 318 19
- User account commands 314 19
- A list of commands 37 20
- Configuration scripting commands 334 20
- Pre login banner and system prompt commands 335 20
- Radius commands 325 20
- Tacacs commands 331 20
- List of tables 21
- About this book 22
- Document audience 22
- Product concept 22
- Command syntax 23
- Using the command line interface 23
- Command conventions 24
- Common parameter values 24
- D link unified wired wireless access system software references physical entities such as cards and ports by using a slot port naming convention the d link unified wired wireless access system software also uses this convention to identify certain logical entities such as port channel interfaces 25
- Name with spaces forces the system to accept the spaces empty strings are not valid user defined strings table 2 describes common parameter values and value formatting 25
- Slot port naming convention 25
- The slot number has two uses in the case of physical ports it identifies the card containing the ports in the case of logical and cpu ports it also identifies the type of interface or port 25
- Command modes 26
- Using the no form of a command 26
- Table 6 explains how to enter or exit each mode 28
- Cli error messages 30
- Cli line editing conventions 30
- Command abbreviation allows you to execute a command when you have entered there are enough letters to uniquely identify the command you must enter all of the required keywords and parameters before you enter the command 30
- Command completion and abbreviation 30
- Command completion finishes spelling the command when you type enough letters of a command to uniquely identify the command keyword once you have entered enough letters press the spacebar or tab key to complete the word 30
- From the user or privileged exec modes 30
- If you enter a command and the system is unable to execute it an error message appears table 7 describes the most common cli error messages 30
- Table 8 describes the key combinations you can use to edit commands or increase the speed of command entry you can access this list from the cli by entering 30
- Enter a question mark after each word you enter to display available command keywords or parameters 31
- Enter a question mark at the command prompt to display the commands available in the current mode 31
- If the help output shows a parameter in angle brackets you must replace the parameter with a value 31
- If there are no additional command keywords or parameters or if additional parameters are optional the following message appears in the output 31
- Using cli help 31
- Accessing the cli 32
- Null user authentication 32
- Switching commands 33
- Auto negotiate 34
- Auto negotiate all 34
- Description 34
- Interface 34
- No auto negotiate 34
- No auto negotiate all 34
- Port configuration commands 34
- No mtu 35
- No shutdown 35
- Shutdown 35
- Shutdown all 35
- No shutdown all 36
- Show port 36
- Speed all 36
- Show port protocol 37
- No spanning tree 38
- No spanning tree configuration name 38
- Spanning tree 38
- Spanning tree bpdumigrationcheck 38
- Spanning tree configuration name 38
- Spanning tree protocol stp commands 38
- No spanning tree configuration revision 39
- No spanning tree edgeport 39
- Spanning tree configuration revision 39
- Spanning tree edgeport 39
- Spanning tree forceversion 39
- No spanning tree forceversion 40
- No spanning tree forward time 40
- No spanning tree hello time 40
- Spanning tree forward time 40
- Spanning tree hello time 40
- Spanning tree max age 40
- No spanning tree max age 41
- No spanning tree max hops 41
- Spanning tree max hops 41
- Spanning tree mst 41
- No spanning tree mst 42
- No spanning tree mst instance 42
- Spanning tree mst instance 42
- No spanning tree mst priority 43
- No spanning tree mst vlan 43
- Spanning tree mst priority 43
- Spanning tree mst vlan 43
- No spanning tree port mode 44
- No spanning tree port mode all 44
- Show spanning tree 44
- Spanning tree port mode 44
- Spanning tree port mode all 44
- Show spanning tree brief 45
- Show spanning tree interface 46
- Show spanning tree mst port detailed 46
- Show spanning tree mst port summary 48
- Show spanning tree mst summary 48
- Show spanning tree summary 48
- Network mgmt_vlan 49
- No network mgmt_vlan 49
- Show spanning tree vlan 49
- Vlan commands 49
- Vlan database 49
- No vlan 50
- No vlan acceptframe 50
- Vlan acceptframe 50
- Vlan ingressfilter 50
- Vlan vlan config mode 50
- No vlan ingressfilter 51
- No vlan name 51
- Vlan makestatic 51
- Vlan name 51
- Vlan participation 51
- No vlan port acceptframe all 52
- Vlan participation all 52
- Vlan port acceptframe all 52
- No vlan port ingressfilter all 53
- No vlan port pvid all 53
- No vlan port tagging all 53
- Vlan port ingressfilter all 53
- Vlan port pvid all 53
- Vlan port tagging all 53
- No vlan protocol group add protocol 54
- Protocol group 54
- Vlan protocol group 54
- Vlan protocol group add protocol 54
- Vlan protocol group remove 54
- No protocol group 55
- No protocol vlan group 55
- No protocol vlan group all 55
- Protocol vlan group 55
- Protocol vlan group all 55
- No vlan association subnet 56
- No vlan pvid 56
- No vlan tagging 56
- Vlan association subnet 56
- Vlan pvid 56
- Vlan tagging 56
- No vlan association mac 57
- No voice vlan global config 57
- Vlan association mac 57
- Voice vlan 57
- Voice vlan global config 57
- Voice vlan interface config 57
- No voice vlan interface config 58
- Show vlan 58
- Voice vlan data priority 58
- Show vlan brief 59
- Show vlan port 59
- A mac address for which the switch has forwarding and or filtering information the format is 6 or 8 two digit hexadecimal numbers that 60
- Show vlan association mac 60
- Show vlan association subnet 60
- Are separated by colons for example 01 23 45 67 89 ab in an ivl system the mac address will be displayed as 8 bytes 61
- Double vlan commands 61
- Dvlan tunnel ethertype 61
- Mode dot1q tunnel 61
- Show voice vlan 61
- Mode dvlan tunnel 62
- No mode dot1q tunnel 62
- No mode dvlan tunnel 62
- Show dot1q tunnel 62
- Protected ports commands 63
- Provisioning ieee 802 p commands 63
- Show dvlan tunnel 63
- Vlan port priority all 63
- Vlan priority 63
- No switchport protected global config 64
- No switchport protected interface config 64
- Switchport protected global config 64
- Switchport protected interface config 64
- Garp commands 65
- Set garp timer join 65
- Show interfaces switchport 65
- Show switchport protected 65
- No set garp timer join 66
- No set garp timer leave 66
- Set garp timer leave 66
- Set garp timer leaveall 66
- Gvrp commands 67
- No set garp timer leaveall 67
- No set gvrp adminmode 67
- Set gvrp adminmode 67
- Show garp 67
- No set gvrp interfacemode 68
- Set gvrp interfacemode 68
- Show gvrp configuration 68
- Gmrp commands 69
- No set gmrp adminmode 69
- No set gmrp interfacemode 69
- Set gmrp adminmode 69
- Set gmrp interfacemode 69
- Show gmrp configuration 70
- Show mac address table gmrp 70
- Client based rate limiting 71
- Port based network access control commands 71
- Authentication login 72
- Clear dot1x statistics 73
- Clear radius statistics 73
- Dot1x default login 73
- Dot1x guest vlan 73
- No authentication login 73
- Dot1x guest vlan supplicant 74
- Dot1x initialize 74
- Dot1x login 74
- Dot1x max req 74
- No dot1x guest vlan 74
- No dot1x guest vlan supplicant 74
- Dot1x port control 75
- Dot1x port control all 75
- No dot1x max req 75
- No dot1x port control 75
- No dot1x port control all 75
- Dot1x re authenticate 76
- Dot1x re authentication 76
- Dot1x system auth control 76
- Dot1x timeout 76
- No dot1x re authentication 76
- No dot1x system auth control 76
- Dot1x user 77
- No dot1x timeout 77
- No dot1x user 77
- Show authentication 78
- Show authentication users 78
- Users defaultlogin 78
- Users login 78
- Show dot1x 79
- No storm control broadcast 82
- Show dot1x users 82
- Show users authentication 82
- Storm control broadcast 82
- Storm control commands 82
- No storm control broadcast all 83
- No storm control broadcast level 83
- Storm control broadcast all 83
- Storm control broadcast all level 83
- Storm control broadcast level 83
- No storm control broadcast all level 84
- No storm control multicast 84
- No storm control multicast level 84
- Storm control multicast 84
- Storm control multicast all 84
- Storm control multicast level 84
- No storm control multicast all 85
- No storm control multicast all level 85
- Storm control multicast all level 85
- Storm control unicast 85
- No storm control unicast 86
- No storm control unicast all 86
- No storm control unicast level 86
- Storm control unicast all 86
- Storm control unicast level 86
- No storm control flowcontrol 87
- No storm control unicast all level 87
- Show storm control 87
- Storm control flowcontrol 87
- Storm control unicast all level 87
- No port channel 88
- Port channel 88
- Port channel lag 802 ad commands 88
- Addport 89
- Deleteport global config 89
- Deleteport interface config 89
- Interface config 89
- No port channel static 89
- Port channel static 89
- No port lacpmode 90
- No port lacpmode all 90
- No port lacptimeout 90
- Port lacpmode 90
- Port lacpmode all 90
- Port lacptimeout global config 90
- Port lacptimeout interface config 90
- No port channel adminmode 91
- No port channel linktrap 91
- No port lacptimeout 91
- Port channel adminmode 91
- Port channel linktrap 91
- Port channel name 92
- Show port channel 92
- Show port channel brief 92
- Monitor session 93
- No monitor 93
- No monitor session 93
- Port mirroring 93
- If no source port is configured for the ses sion then this field is blank 94
- Irection in which source port configured for port mirroring types are tx for transmitted packets and rx for receiving packets 94
- Macfilter 94
- Ndicates whether the port mirroring feature is enabled or disabled for the session identified with 94
- Port which is configured as mirrored port source port for the session identified with 94
- Show monitor session 94
- Static mac filtering 94
- The possible values are enabled and disable 94
- Macfilter addsrc 95
- Macfilter addsrc all 95
- No macfilter 95
- No macfilter addsrc 95
- No macfilter addsrc all 95
- Igmp snooping configuration commands 96
- Set igmp 96
- Show mac address table static 96
- Show mac address table staticfiltering 96
- No set igmp 97
- No set igmp interfacemode 97
- Set igmp interfacemode 97
- No set igmp fast leave 98
- No set igmp groupmembership interval 98
- Set igmp fast leave 98
- Set igmp groupmembership interval 98
- No set igmp maxresponse 99
- Set igmp maxresponse 99
- Set igmp mcrtrexpiretime 99
- No set igmp mcrtrexpiretime 100
- No set igmp mrouter 100
- Set igmp mrouter 100
- No set igmp mrouter interface 101
- Set igmp mrouter interface 101
- Show igmpsnooping 101
- Show igmpsnooping mrouter interface 102
- Show igmpsnooping mrouter vlan 102
- Show mac address table igmpsnooping 102
- No port security 103
- Port security 103
- Port security commands 103
- Port security max dynamic 103
- No port security mac address 104
- No port security max dynamic 104
- No port security max static 104
- Port security mac address 104
- Port security mac address move 104
- Port security max static 104
- Show port security 104
- Show port security dynamic 105
- Show port security static 105
- Show port security violation 105
- Lldp 802 ab commands 106
- Lldp receive 106
- Lldp timers 106
- Lldp transmit 106
- No lldp receive 106
- No lldp transmit 106
- Lldp transmit mgmt 107
- Lldp transmit tlv 107
- No lldp timers 107
- No lldp transmit mgmt 107
- No lldp transmit tlv 107
- Clear lldp remote data 108
- Clear lldp statistics 108
- Lldp notification 108
- Lldp notification interval 108
- No lldp notification 108
- No lldp notification interval 108
- Show lldp 108
- Show lldp interface 109
- Show lldp statistics 109
- Show lldp remote device 110
- Show lldp remote device detail 110
- Show lldp local device 111
- Show lldp local device detail 111
- Denial of service protection commands 112
- Dos control firstfrag 112
- Dos control sipdip 112
- No dos control sipdip 112
- Dos control l4port 113
- Dos control tcpflag 113
- Dos control tcpfrag 113
- No dos control firstfrag 113
- No dos control tcpflag 113
- No dos control tcpfrag 113
- Dos control icmp 114
- No dos control icmp 114
- No dos control l4port 114
- Show dos control 114
- Bridge aging time 115
- Mac database commands 115
- No bridge aging time 115
- Show forwardingdb agetime 115
- Show mac address table multicast 115
- Show mac address table stats 116
- Address resolution protocol arp commands 117
- Routing commands 117
- Arp cachesize 118
- Arp dynamicrenew 118
- Ip proxy arp 118
- No arp 118
- No arp cachesize 118
- No ip proxy arp 118
- Arp purge 119
- Arp resptime 119
- Arp retries 119
- No arp dynamicrenew 119
- No arp resptime 119
- No arp retries 119
- Arp timeout 120
- Clear arp cache 120
- No arp timeout 120
- Show arp 120
- Show arp brief 121
- Show arp switch 121
- Ip address 122
- Ip routing 122
- Ip routing commands 122
- No ip routing 122
- No routing 122
- Routing 122
- Ip route 123
- Ip route default 123
- No ip address 123
- No ip route 123
- Ip netdirbcast 124
- Ip route distance 124
- No ip netdirbcast 124
- No ip route default 124
- No ip route distance 124
- Encapsulation 125
- Ip mtu 125
- No ip mtu 125
- Show ip brief 125
- Show ip interface 126
- Example show ip interface 127
- Show ip interface brief 127
- Show ip route 127
- Show ip route preferences 128
- Show ip route summary 128
- No vlan routing 129
- Show ip stats 129
- Show ip vlan 129
- Virtual lan routing commands 129
- Vlan routing 129
- Commands 130
- Ip vrrp global config 130
- Ip vrrp interface config 130
- No ip vrrp 130
- Virtual router redundancy protocol 130
- Virtual router redundancy protocol commands 130
- Ip vrrp authentication 131
- Ip vrrp ip 131
- Ip vrrp mode 131
- No ip vrrp ip 131
- No ip vrrp mode 131
- Ip vrrp preempt 132
- Ip vrrp priority 132
- No ip vrrp authentication 132
- No ip vrrp preempt 132
- Ip vrrp timers advertise 133
- No ip vrrp priority 133
- No ip vrrp timers advertise 133
- Show ip vrrp interface stats 133
- Show ip vrrp 134
- Show ip vrrp interface 134
- Bootpdhcprelay cidoptmode 135
- Dhcp and bootp relay commands 135
- No bootpdhcprelay cidoptmode 135
- Show ip vrrp interface brief 135
- Bootpdhcprelay enable 136
- Bootpdhcprelay maxhopcount 136
- Bootpdhcprelay minwaittime 136
- No bootpdhcprelay enable 136
- No bootpdhcprelay maxhopcount 136
- No bootpdhcprelay minwaittime 136
- Bootpdhcprelay serverip 137
- No bootpdhcprelay serverip 137
- Router rip 137
- Routing information protocol commands 137
- Show bootpdhcprelay 137
- Auto summary 138
- Enable rip 138
- Ip rip 138
- No auto summary 138
- No enable rip 138
- No ip rip 138
- Default information originate rip 139
- Default metric rip 139
- Distance rip 139
- No default information originate rip 139
- No default metric rip 139
- No distance rip 139
- Distribute list out rip 140
- Ip rip authentication 140
- Ip rip receive version 140
- No distribute list out 140
- No ip rip authentication 140
- Hostroutesaccept 141
- Ip rip send version 141
- No hostroutesaccept 141
- No ip rip receive version 141
- No ip rip send version 141
- Split horizon 141
- No redistribute 142
- No split horizon 142
- Redistribute rip 142
- Show ip rip 142
- Show ip rip interface 143
- Show ip rip interface brief 143
- Wireless commands 145
- Country code 146
- Enable wireless config mode 146
- No country code 146
- No enable 146
- Unified switch commands 146
- Wireless 146
- Discovery ip list 147
- Discovery method 147
- No discovery method 147
- No peer group 147
- Peer group 147
- Ap authentication 148
- Ap validation 148
- Discovery vlan list 148
- No discovery ip list 148
- No discovery vlan list 148
- No ap authentication 149
- No snmp server enable traps wireless 149
- Snmp server enable traps wireless 149
- Trapflags wireless config mode 149
- 120 time in seconds from 1 to 120 150
- Ad hoc time in hours to maintain an entry in the ad hoc client network list 150
- Agetime 150
- Ap failure time in hours to maintain an entry in the ap association and authentication failure list 150
- Client failure time in hours to maintain an entry in the client association and authentication failure list 150
- Client roam timeout 150
- Default 24 hours 150
- Default 30 seconds 150
- Format 150
- Mode wireless config 150
- No agetime 150
- No trapflags 150
- Rf scan time in hours to maintain an entry obtained from an rf scan 150
- This command configures database entry age times for the unified switch a time value of 0 indicates entries in the corresponding database will not age and you must manually delete them 150
- This command configures maximum duration for which a client entry is retained in the client association database after disassociating from a managed ap roam timeout is the time in seconds after disassociation for the entry to be deleted from the managed ap client association database 150
- Time in hours from 0 to 168 a value of 0 indicates that entries should never age out 150
- Version of this command disables unified switch snmp trap groups for wireless system events if no parameters are specified then all traps are disabled 150
- Version of this command returns the configured entry age time to the default 150
- No client roam timeout 151
- Show wireless 151
- Tunnel mtu 151
- Show wireless country code 152
- Show wireless country code channels 152
- Show wireless discovery 152
- Show wireless discovery ip list 153
- Show wireless discovery vlan list 153
- Show wireless status 153
- Show wireless statistics 154
- Show wireless trapflags 154
- Clear wireless statistics 155
- Show wireless agetime 155
- Show wireless tunnel mtu 155
- Channel plan interval 156
- Channel plan mode 156
- No channel plan interval 156
- Unified switch channel and power commands 156
- Channel plan history depth 157
- Channel plan time 157
- No channel plan history depth 157
- No channel plan time 157
- Power plan mode 157
- No power plan interval 158
- Power plan interval 158
- Wireless channel plan 158
- Show wireless channel plan 159
- Show wireless channel plan history 159
- Wireless power plan 159
- Show wireless channel plan proposed 160
- Peer unified switch commands 161
- Show wireless peer switch 161
- Show wireless power plan 161
- Show wireless power plan proposed 161
- Ap database 162
- Local access point database commands 162
- Mode ap config mode 162
- No ap database 162
- Location 163
- No location 163
- No password 163
- Password ap config mode 163
- Profile 163
- No profile 164
- Radio ap config mode 164
- Show wireless ap database 164
- Network wireless config mode 165
- No network 165
- Wireless network commands 165
- Hide ssid 166
- No hide ssid 166
- No vlan 166
- Vlan network config mode 166
- No security mode 167
- No wep authentication 167
- Security mode 167
- Wep authentication 167
- Wep tx key 167
- Client name in local mac authentication list 168
- Mac authentication 168
- No mac authentication 168
- No wep tx key 168
- No radius server host 169
- No radius use ap profile 169
- Radius server host network config mode 169
- Radius server secret 169
- Radius use ap profile 169
- No radius accounting 170
- No wpa versions 170
- Radius accounting network config mode 170
- Wpa ciphers 170
- Wpa versions 170
- No tunnel 171
- No wpa ciphers 171
- Tunnel 171
- Tunnel subnet 171
- Wpa key 171
- No tunnel subnet 172
- No wpa2 pre authentication 172
- No wpa2 pre authentication limit 172
- Wpa2 key forwarding 172
- Wpa2 pre authentication 172
- Wpa2 pre authentication limit 172
- No wep key 173
- No wpa2 key caching holdtime 173
- No wpa2 key forwarding 173
- Wep key 173
- Wpa2 key caching holdtime 173
- Clear network config mode 174
- No wep key length 174
- No wep key type 174
- Wep key length 174
- Wep key type 174
- Show wireless network 175
- Access point profile commands 176
- Ap profile 176
- Channel bandwidth primary channel and 802 1n protection 177
- No ap profile 177
- No name 177
- No radius server host 178
- Radius server backupone 178
- Radius server backupone secret 178
- Radius server host ap profile config mode 178
- Mac authentication action 179
- No radius accounting 179
- Radius accounting ap profile config mode 179
- Radius failthrough 179
- Radius server secret 179
- Ap profile copy 180
- Mac authentication client 180
- No mac authentication client 180
- Wireless ap profile apply 180
- Clear ap profile config mode 181
- Show wireless ap profile 181
- Access point profile rf commands 182
- Enable ap profile radio config mode 182
- No enable 182
- Radio ap profile config mode 182
- Rf scan other channels 182
- No rf scan other channels 183
- No rf scan sentry 183
- Rf scan duration 183
- Rf scan sentry 183
- No rf scan duration 184
- No station isolation 184
- No super a 184
- Station isolation 184
- Super a 184
- Super g 184
- Antenna 185
- Beacon interval 185
- No antenna 185
- No super g 185
- Dtim period 186
- Fragmentation threshold 186
- No beacon interval 186
- No dtim period 186
- No fragmentation threshold 186
- Channel auto 187
- Max clients 187
- No max clients 187
- No rts threshold 187
- Rts threshold 187
- No channel auto 188
- No power auto 188
- No power default 188
- Power auto 188
- Power default 188
- No rate 189
- No wmm 189
- Load balance 190
- No load balance 190
- Show wireless ap profile radio 190
- Access point profile qos commands 192
- Qos ap edca 192
- Show wireless rates 192
- No qos ap edca 193
- Qos station edca 193
- No qos station edca 194
- Show wireless ap profile qos 194
- Access point profile vap commands 195
- Enable ap profile vap config mode 195
- No enable 195
- Network ap profile vap config mode 196
- Switch managed access point commands 196
- Wireless ap channel set 196
- Wireless ap debug 196
- No wireless ap debug 197
- Wireless ap download 197
- Wireless ap download start 197
- Wireless ap power set 197
- Clear wireless ap failed 198
- Clear wireless ap neighbors 198
- Show wireless ap status 198
- Wireless ap reset 198
- Show wireless ap radio channel status 199
- Show wireless ap radio status 199
- Show wireless ap radio neighbor ap status 200
- Show wireless ap radio power status 200
- Show wireless ap radio vap status 200
- Show wireless ap radio neighbor client status 201
- Show wireless ap statistics 202
- Show wireless ap radio statistics 203
- Show wireless ap download 204
- Show wireless ap radio vap statistics 204
- Access point failure status commands 206
- Clear wireless ap failure list 206
- Show wireless ap failure status 206
- Clear wireless ap rf scan list 207
- Rf scan access point status commands 207
- Show wireless ap rf scan status 207
- Client association status and statistics commands 208
- Show wireless client status 208
- Wireless client disassociate 208
- Show wireless client statistics 209
- Show wireless client neighbor ap status 210
- Show wireless vap client status 210
- Clear wireless client adhoc list 211
- Clear wireless client failure list 211
- Client failure and ad hoc status commands 211
- Show wireless ssid client status 211
- Show wireless client adhoc status 212
- Show wireless client failure status 212
- Captive portal cp rate limiting 213
- Captive portal global commands 213
- Client authentication logout request 213
- Captive portal 214
- Enable captive portal config mode 214
- Http port 215
- No enable 215
- No http port 215
- No snmp server enable traps captive portal 215
- Snmp server enable traps captive portal 215
- Trapflags captive portal config mode 215
- Authentication timeout 216
- No authentication timeout 216
- No trapflags 216
- Show captive portal 216
- Show captive portal status 217
- Show captive portal trapflags 217
- Captive portal configuration commands 218
- Configuration captive portal 218
- Enable captive portal 218
- No configuration 218
- No enable 218
- No redirect mode 219
- Protocol 219
- Redirect 219
- Verification 219
- Idle timeout 220
- Interface 220
- No idle timeout 220
- No session timeout 220
- Redirect url 220
- Session timeout 220
- Captive portal status commands 221
- Clear captive portal instance config mode 221
- No block 221
- No interface 221
- Show captive portal configuration 221
- Show captive portal configuration interface 222
- Show captive portal configuration status 222
- Captive portal client connection commands 223
- Show captive portal client status 223
- Show captive portal client statistics 224
- Show captive portal configuration client status 224
- Show captive portal interface client status 224
- Captive portal client deauthenticate 225
- Captive portal interface commands 225
- Show captive portal interface configuration status 225
- Captive portal local user commands 226
- No user 226
- Show captive portal interface capability 226
- User captive portal config mode 226
- User password encrypted 227
- User session timeout 227
- User user id group 227
- User user id name 227
- No user idle timeout 228
- No user session timeout 228
- Show captive portal user 228
- User idle timeout 228
- Clear captive portal users 229
- Captive portal user group commands 230
- No user group 230
- User group 230
- User group name 230
- User group rename 230
- Poe limit 231
- Power over ethernet commands 231
- Utility commands 231
- No poe limit 232
- No poe priority 232
- Poe priority 232
- Poe usagethreshold 232
- No poe usagethreshold 233
- Show poe 233
- Show poe port 233
- Boot system 234
- Delete 234
- Dual image commands 234
- Filedescr 234
- Show bootvar 234
- Show arp switch 235
- Show eventlog 235
- System information and statistics commands 235
- Update bootcode 235
- Show hardware 236
- Show version 236
- Show interface 237
- Show interface ethernet 238
- Show mac addr table 245
- Show running config 246
- Show sysinfo 246
- Logging buffered 247
- Logging commands 247
- Show nvram size 247
- Show tech support 247
- Logging buffered wrap 248
- Logging cli command 248
- Logging console 248
- No logging buffered 248
- No logging buffered wrap 248
- No logging cli command 248
- Logging host 249
- Logging host remove 249
- Logging port 249
- No logging console 249
- No logging port 249
- Logging syslog 250
- No logging syslog 250
- Show logging 250
- Show logging buffered 250
- Show logging hosts 251
- Show logging traplogs 251
- System utility and clear commands 251
- Traceroute 251
- Clear config 252
- Clear counters 252
- Clear igmpsnooping 252
- Clear pass 252
- Clear port channel 252
- Clear traplog 252
- Clear vlan 253
- Enable passwd 253
- Logout 253
- Command uploads and downloads files to and from the switch you can also use the copy command to manage the dual images 254
- Copies a specified configuration script file to a server 254
- Copies the cli banner to a server 254
- Copies the error log file to a server 254
- Copies the log file to a server 254
- Copies the startup configuration to a server 254
- Copies the trap log file to a server 254
- Downloads a configuration script file to the system during the download of a configuration script the copy command validates the script in case of any error the command lists all the lines at the end of the validation process and prompts you to confirm before copying the script file 254
- Downloads the cli banner to the system 254
- For tftp the 254
- Format 254
- Is the name of the file you want to upload or download 254
- Is the path to the file and 254
- Mode privileged exec 254
- On the file system upload and download files from a server by using tftp or xmodem format 254
- Parameter is the ip address of the server 254
- Parameters with the options in table 9 for the 254
- Reload 254
- Replace the 254
- Saves the running configuration to nvram 254
- Source destination description 254
- Source or destination use one of the following values 254
- Table 9 copy parameters 254
- This command resets the switch without powering it off reset means that all network connections are terminated and the boot code executes the switch uses the stored configuration to initialize the switch you are prompted to confirm that the reset should proceed the leds on the switch indicate a successful reset 254
- Can be a value from 6 to 16 255
- Default 6 255
- Format 255
- Mode global config 255
- No sntp broadcast client poll interval 255
- Simple network time protocol sntp commands 255
- Sntp broadcast client poll interval 255
- This command resets the poll interval for sntp broadcast client back to the default value 255
- This command sets the poll interval for sntp broadcast clients in seconds as a power of two where 255
- This section describes the commands you use to automatically configure the simple network time protocol sntp commands and the time zone and daylight savings time commands 255
- No sntp client mode 256
- No sntp client port 256
- No sntp unicast client poll interval 256
- Sntp client mode 256
- Sntp client port 256
- Sntp unicast client poll interval 256
- No sntp multicast client poll interval 257
- No sntp unicast client poll retry 257
- No sntp unicast client poll timeout 257
- Sntp multicast client poll interval 257
- Sntp unicast client poll retry 257
- Sntp unicast client poll timeout 257
- No sntp server 258
- Show sntp 258
- Show sntp client 258
- Show sntp server 258
- Sntp server 258
- Clock timezone 259
- Time zone and daylight savings time commands 259
- Clock summer time date 260
- Dhcp server commands 260
- Client identifier 261
- Client name 261
- Ip dhcp pool 261
- No client identifier 261
- No ip dhcp pool 261
- Default router 262
- Dns server 262
- Hardware address 262
- No client name 262
- No default router 262
- No dns server 262
- Network dhcp pool config 263
- No hardware address 263
- No host 263
- No lease 263
- Bootfile 264
- Domain name 264
- Netbios name server 264
- No bootfile 264
- No domain name 264
- No network 264
- Netbios name snooping 265
- Netbios node type 265
- No netbios name server 265
- No netbios node type 265
- Ip dhcp excluded address 266
- Next server 266
- No next server 266
- No option 266
- Option 266
- Ip dhcp ping packets 267
- No ip dhcp excluded address 267
- No ip dhcp ping packets 267
- No service dhcp 267
- Service dhcp 267
- Clear ip dhcp binding 268
- Clear ip dhcp server statistics 268
- Ip dhcp bootp automatic 268
- Ip dhcp conflict logging 268
- No ip dhcp bootp automatic 268
- No ip dhcp conflict logging 268
- Clear ip dhcp conflict 269
- Show ip dhcp binding 269
- Show ip dhcp global configuration 269
- Show ip dhcp pool configuration 269
- Show ip dhcp server statistics 270
- Dhcp filtering 271
- Format 271
- Ip dhcp filtering 271
- Ip dhcp filtering trust 271
- No ip dhcp filtering 271
- Show ip dhcp conflict 271
- Untrusted 271
- No ip dhcp filtering trust 272
- Show ip dhcp filtering 272
- Class of service cos commands 273
- Classofservice dot1p mapping 273
- Quality of service qos commands 273
- Classofservice ip dscp mapping 274
- Classofservice trust 274
- No classofservice dot1p mapping 274
- No classofservice ip dscp mapping 274
- No classofservice trust 274
- Cos queue min bandwidth 275
- Cos queue strict 275
- No cos queue min bandwidth 275
- No cos queue strict 275
- Traffic shape 275
- No traffic shape 276
- Show classofservice dot1p mapping 276
- Show classofservice ip dscp mapping 276
- Show classofservice ip precedence mapping 276
- Differentiated services diffserv commands 277
- Show classofservice trust 277
- Show interfaces cos queue 277
- Diffserv 278
- Class map 279
- Diffserv class commands 279
- No class map 279
- No diffserv 279
- Class map rename 280
- Match any 280
- Match class map 280
- Match dstip 281
- Match dstl4port 281
- Match ip dscp 281
- No match class map 281
- Match ip precedence 282
- Match ip tos 282
- Match protocol 282
- Diffserv policy commands 283
- Match srcip 283
- Match srcl4port 283
- Assign queue 284
- Conform color 284
- Mark cos 285
- Mark ip dscp 285
- Mark ip precedence 285
- No class 285
- No policy map 286
- Police simple 286
- Policy map 286
- Diffserv service commands 287
- No service policy 287
- Policy map rename 287
- Service policy 287
- Diffserv show commands 288
- Show class map 288
- Show diffserv 288
- Show policy map 289
- Show diffserv service 290
- Show diffserv service brief 291
- Show policy map interface 291
- Show service policy 291
- Mac access control list acl commands 292
- Mac access list extended 292
- Mac access list extended rename 292
- No mac access list extended 292
- A rule may either deny or permit traffic according to the specified classification fields at a minimum the source and destination mac value must be specified each of which may be substituted using the keyword any to indicate a match on any value in that field the remaining command parameters are all optional but the most frequently used parameters appear in the same relative order as shown in the command format 293
- Already exists 293
- An implicit deny all mac rule always terminates the access list 293
- Deny permit 293
- For assign queue attributes are configurable for a deny rule but they have no operational effect 293
- Format 293
- Mode global config 293
- The ethertype may be specified as either a keyword or a four digit hexadecimal value from 0x0600 0xffff the currently supported 293
- The no form of this command is not supported since the rules within a mac acl cannot be deleted individually rather the entire mac acl must be deleted and re specified 293
- The vlan and cos parameters refer to the vlan identifier and 802 p user priority fields respectively of the vlan tag for packets containing a double vlan tag this is the first or outer tag 293
- This command creates a new rule for the current mac access list each rule is appended to the list of configured rules for the list 293
- This command fails if a mac acl by the name 293
- Values are appletalk arp ibmsna ipv4 ipx mplsmcast mplsucast netbios novell pppoe rarp each of these translates into its equivalent ethertype value s 293
- Mac access group 294
- No mac access group 294
- Show mac access lists 294
- Access list 295
- Ip access control list acl commands 295
- 99 for standard access lists and 100 199 for extended access lists 296
- Format 296
- From the system the range for 296
- Ip access group 296
- Mode global config 296
- No access list 296
- This command attaches a specified ip acl to one interface or to all interfaces 296
- This command deletes an ip acl that is identified by the parameter 296
- Acl trapflags 297
- No acl trapflags 297
- No ip access group 297
- Show ip access lists 297
- Show access lists 298
- Enable privileged exec access 299
- Management commands 299
- Network interface commands 299
- Network mac address 300
- Network mac type 300
- Network parms 300
- Network protocol 300
- Network javamode 301
- No network javamode 301
- No network mac type 301
- Show network 301
- Configuration 302
- Console port access commands 302
- Lineconfig 302
- No serial baudrate 302
- Serial baudrate 302
- Serial timeout 302
- Ip telnet server enable 303
- No serial timeout 303
- Show serial 303
- Telnet commands 303
- No ip telnet server enable 304
- No transport input telnet 304
- Telnet 304
- Transport input telnet 304
- No session limit 305
- No transport output telnet 305
- Session limit 305
- Session timeout 305
- Transport output telnet 305
- No session timeout 306
- No telnetcon maxsessions 306
- No telnetcon timeout 306
- Telnetcon maxsessions 306
- Telnetcon timeout 306
- Ip ssh 307
- Secure shell ssh command 307
- Show telnet 307
- Show telnetcon 307
- Ip ssh protocol 308
- Ip ssh server enable 308
- No ip ssh 308
- No ip ssh server enable 308
- No sshcon maxsessions 308
- Sshcon maxsessions 308
- Hypertext transfer protocol http commands 309
- Ip http server 309
- No sshcon timeout 309
- Show ip ssh 309
- Sshcon timeout 309
- Ip http secure port 310
- Ip http secure protocol 310
- Ip http secure server 310
- No ip http secure port 310
- No ip http secure server 310
- No ip http server 310
- Ip http java 311
- Ip http session hard timeout 311
- Ip http session maxsessions 311
- No ip http java 311
- No ip http session hard timeout 311
- Ip http secure session hard timeout 312
- Ip http secure session maxsessions 312
- Ip http session soft timeout 312
- No ip http secure session hard timeout 312
- No ip http session maxsessions 312
- No ip http session soft timeout 312
- Ip http secure session soft timeout 313
- No ip http secure session maxsessions 313
- No ip http secure session soft timeout 313
- Show ip http 313
- Access commands 314
- Disconnect 314
- Show loginsession 314
- User account commands 314
- Users name 314
- No users name 315
- No users passwd 315
- Users passwd 315
- Write memory 315
- No users snmpv3 accessmode 316
- No users snmpv3 authentication 316
- Users snmpv3 accessmode 316
- Users snmpv3 authentication 316
- Users snmpv3 encryption 316
- No users snmpv3 encryption 317
- Show users 317
- No snmp server community 318
- Snmp commands 318
- Snmp server 318
- Snmp server community 318
- Snmp server community ipaddr 318
- No snmp server community ipaddr 319
- No snmp server community ipmask 319
- Snmp server community ipmask 319
- Snmp server community mode 319
- No snmp server community mode 320
- No snmp server enable traps violation 320
- Snmp server community ro 320
- Snmp server community rw 320
- Snmp server enable traps 320
- Snmp server enable traps violation 320
- No snmp server enable traps 321
- No snmp server enable traps linkmode 321
- No snmp server enable traps multiusers 321
- Snmp server enable traps linkmode 321
- Snmp server enable traps multiusers 321
- Snmp server enable traps stpmode 321
- No snmp server enable traps stpmode 322
- No snmptrap 322
- Snmptrap 322
- Snmptrap ipaddr 322
- Snmptrap snmpversion 322
- No snmp trap link status 323
- No snmp trap link status all 323
- No snmptrap mode 323
- Snmp trap link status 323
- Snmp trap link status all 323
- Snmptrap mode 323
- Show snmpcommunity 324
- Show snmptrap 324
- Radius accounting mode 325
- Radius commands 325
- Show trapflags 325
- No radius accounting mode 326
- No radius server host 326
- Radius server host global config mode 326
- No radius server attribute 4 327
- No radius server msgauth 327
- Radius server attribute 4 327
- Radius server key 327
- Radius server msgauth 327
- Radius server primary 327
- Authorization network radius 328
- No radius server retransmit 328
- No radius server timeout 328
- Radius server retransmit 328
- Radius server timeout 328
- No authorization network radius 329
- Show radius 329
- Show radius accounting 329
- Show radius statistics 330
- Tacacs commands 331
- Tacacs server host 331
- No tacacs server host 332
- No tacacs server key 332
- No tacacs server timeout 332
- Tacacs server key 332
- Tacacs server timeout 332
- Priority 333
- Show tacacs 333
- Timeout 333
- Configuration scripting commands 334
- Script apply 334
- Copy pre login banner 335
- Pre login banner and system prompt commands 335
- Script delete 335
- Script list 335
- Script show 335
- Script validate 335
- Set prompt 336
- List of commands 337
Похожие устройства
- D-Link DWS-3024 Руководство пользователя
- D-Link DWS-3024L Брошюра
- D-Link DWS-3024L Руководство пользователя _CLI_
- D-Link DWS-3024L Руководство пользователя
- D-Link DWS-3026 Брошюра
- D-Link DWS-3026 Руководство пользователя _CLI_
- D-Link DWS-3026 Руководство пользователя
- D-Link DWS-3160-24PC Брошюра
- D-Link DWS-3160-24PC Руководство пользователя. CLI
- D-Link DWS-3160-24PC Руководство пользователя. Web UI
- Xiaomi Mi Drone 4К Инструкция по эксплуатации
- D-Link DWS-3160-24TC Брошюра
- D-Link DWS-3160-24TC Руководство пользователя. CLI
- D-Link DWS-3160-24TC Руководство пользователя. Web UI
- Xiaomi Mi Drone 1080P Инструкция по эксплуатации
- D-Link DWS-4026 Брошюра
- D-Link DWS-4026 Руководство пользователя. Версия 1.0
- D-Link DWS-4026 Руководство пользователя. Версия 2.0
- D-Link DMC-1910R Руководство пользователя
- Hotpoint-Ariston FK 838J C AN Инструкция по эксплуатации
Скачать
Случайные обсуждения