![Loewe Spheros R 26 [39/54] Use the driver buttons in the tv and stb position for vcr dvd or digital recorder](/img/pdf.png)
Loewe Spheros R 26 [39/54] Use the driver buttons in the tv and stb position for vcr dvd or digital recorder
![Loewe Spheros R 32 HD+ [39/54] Use the driver buttons in the tv and stb position for vcr dvd or digital recorder](/views2/1020417/page39/bg27.png)
39 -
Use the rotary switch if you want to switch over a VCR, DVD
device or a Set Top Box.
Press the END and EPG buttons simultaneously for at least
5 seconds. The upper left indicator on the remote control will
blink twice.
Enter the four numbers in sequence that you found in the code
list (e.g. 0539 for Loewe DVD player).
After each number you enter, the indicator will blink once, after the last number
it will blink twice. If the number was incorrect, the indicator will remain lit
longer. The code number was not accepted. If the code was accepted with two
blinks, you can test the functions of the device you just programmed.
If the device cannot be operated or can only be operated poorly, repeat the
code entry with the next code from the list. If there are no other codes specifi ed
for this manufacturer, try it using the code suggestions from the remote control.
Setting the remote control using the suggestions from the
remote control
Switch the device on that you want to switch over to the remote control.
Standby mode is not enough.
Use the rotary switch if you want to switch over a VCR, DVD
device or a Set Top Box.
Press the END and EPG buttons simultaneously for at least
5 seconds. The upper left indicator on the remote control will
blink twice.
Enter the the numbers 991 in sequence. The indicator will
blink once after each number entered.
Press the # PIP button to select the fi rst code.
Point the remote control toward the device you want to switch over to the
remote control. Observe that device.
Now press the button (Play) or On/Off on the remote
control.
Wait a moment for the device to react. If the device does not
react, then that was not the right code. Press the # PIP button
again to call the next code.
Press the button (Play) or On/Off again.
If the device reacts, press the EPG button to adopt the
code.
Operating additional equipment
Operating other Loewe devices with the RC3 remote control
Using this remote control, you can operate additional devices from Loewe.
Use the rotary switch to select VCR, TV or a Set Top Box.
The following are preset at the factory: Loewe VCRs, Loewe TV
sets and for STBs (Set Top Box) in Germany, the
common d-box.
Use the driver buttons in the TV and STB position for VCR,
DVD or Digital Recorder
You can switch over the six drive buttons
(
, , , , , ), both for the TV and for
the STB, to control a VCR or DVD player/recorder (the control of the integrated
"Digital Recorder Plus" is preset at the factory):
First set the switch to the main function TV or STB.
Then press the END and EPG buttons simultaneously for at
least 5 seconds. The upper left indicator on the remote control
will blink twice.
Enter the the numbers 988 in sequence. The indicator will
again blink two times.
Now set the switch to the desired function for the drive but-
tons:
to DVD, VCR or to TV, if the digital recorder is to be operated.
Press the # PIP button to complete the setting. The indicator
will blink two times.
Setting the remote control to operate devices from other
manufacturers
You can switch over the remote control for other VCRs, DVD players and Set Top
Boxes if the infrared code for the device type is listed in the code list or if it is
included in the code memory of the RC3.
Even if the manufacturer of the device is listed in the code list, it may not be
possible to operate that device using the Loewe remote control.
Setting the remote control using code entry
Search for the code number for your device in the code list (see as of pages
49-53). The list is arranged according to device type – DVD, VCR, STB – and
alphabetically according to manufacturer. Next to the manufacturer’s name, you
will fi nd one or more code numbers.
TV
DVD STB
VCR
PIP
EPG
END
wxyz
wxyz
AV
jkl
def
wxyz
PIP
EPG
TV
DVD STB
VCR
TV
DVD STB
VCR
PIP
tuv
tuv
wxyz
TV
DVD STB
VCR
TV
DVD STB
VCR
EPG
END
EPG
END
Содержание
- Operating instructions p.1
- Contents p.2
- Remote control tv functions p.3
- Control units spheros r 26 and r 32 p.4
- Radio only for dvb reception provided the station broadcasts this otherwise switch over to an audio input p.4
- Only for sets with a digital recorder p.4
- Control unit spheros r 37 p.5
- Connections to rear panel spheros r 26 p.6
- Set specifi c equipment and retrofi tting options for pip and satellite tuners see pages 46 and 47 p.7
- Only for spheros r 37 p.7
- Connections to rear panel spheros r 32 and r 37 p.7
- Installation options p.8
- Welcome p.8
- Transporting p.8
- Thank you p.8
- Scope of delivery p.8
- Integrated features p.8
- As a wall mounted unit p.8
- As a rotating freestanding unit mounted on a rack for spheros r 32 37 p.8
- As a rotating desktop unit for spheros r 32 37 p.8
- As a free standing unit mounted on a rack for spheros r 32 37 p.8
- As a desktop unit p.8
- Welcome p.9
- The set p.9
- Packing and box p.9
- Note on the lcd screen p.9
- Disposal p.9
- Cleaning p.9
- For your safety p.10
- Antennas p.11
- Setting up the remote control for operating the tv p.11
- Remote control p.11
- Power mains p.11
- Note on disposing batteries p.11
- First installation p.11
- Connection p.11
- Batteries p.11
- First installation p.12
- Using the conditional access module p.12
- Switching on p.12
- Handling the fabric hose p.12
- Station sorting p.13
- First installation p.13
- Automatic programming p.13
- Switching on off p.14
- Select a tv channel p.14
- First installation p.14
- Directing dvb t antenna p.14
- Daily operation p.14
- With the numeric buttons of the remote control p.15
- Via the station list p.15
- Daily operation p.15
- Changing stations p.15
- Call last viewed station for dvb t stations in gb p.15
- With the p p buttons on the remote control p.15
- Example of the menu operation p.16
- Daily operation p.16
- Basics about the menu operation p.16
- Select settings p.17
- Use to select the line below for example search wizard p.17
- Upon delivery the tv set is confi gured so that the info texts are always dis played automatic info yes in this case you can hide the info texts by using the info button you can also confi gure the tv set so that you call the info texts when needed by using the info button automatic info no you can fi nd the setting to switch the automatic info option on or off via tv menu under settings miscellane ous on screen displays automatic info yes no p.17
- The info text indicates which settings you can make in stations p.17
- The info text explains how you are to proceed p.17
- In this example you can see the options available after settings p.17
- If you want to search for new stations for example use to select stations in the line below p.17
- For the info system p.17
- For each menu point an info text is displayed at the top of the picture to help you with the setting this saves you from having to refer back to the operating instructions we shall demonstrate this using the station search option as an example p.17
- Daily operation p.17
- Call the tv menu p.17
- Daily operation p.18
- This is how to select the index item p.18
- For the index p.18
- Volume and other frequently used sound settings p.19
- Switching the radio on off or switching over to the radio p.19
- Switching station on the tv set p.19
- Sound off on p.19
- Setting the sound p.19
- Picture settings p.19
- Other sound settings p.19
- Direct control on tv set p.19
- Daily operation p.19
- Additional functions via the menu p.19
- Show status display p.20
- Operating modes tv p.20
- How the coloured keys work in tv mode p.20
- Calling the index p.20
- Under connections you will fi nd the following functions p.21
- Tv menu p.21
- Select picture format p.21
- Operating modes tv p.21
- Move picture up down p.21
- For a recorder that is logged in you can fi nd the following menus in the recording p.21
- Call timer overview p.21
- Call additional functions p.21
- Under settings you will fi nd the following functions p.22
- Operating modes tv p.22
- Dvb subtitles p.22
- Operating modes tv p.23
- Installing new dvb software p.23
- Inserting a new ca module p.23
- Downloading software p.23
- Calling the ca module menu p.23
- Software is recognised automatically p.23
- Searching for new software p.23
- Removing the ca module p.23
- The standard setting at delivery of the set is image on p.24
- The image settings can also be opened via the picture menu p.24
- The demo mode can be closed by pressing on any button on the remote control p.24
- Select set as described in the image menu p.24
- Operating modes tv p.24
- Open the picture menu p.24
- In order to show the way image works a demo mode is integrated in demo mode the current picture is divided into two parts the left half of the picture is shown in normal mode the right half in the image optimised mode p.24
- Image menu p.24
- Image is a picture improvement specially developed by loewe which delivers a sharper lifelike and colour fast picture richer in detail and contrast image is only integrated in spheros r 32 and spheros r 37 p.24
- Image demo mode p.24
- Iin the image menu the functions image on off and demo can be set p.24
- Call the menu additional functions p.24
- And use to select set and use p.24
- Use to move to the corresponding selection setting p.24
- Use to go to more and select with ok p.24
- To activate p.24
- Selecting the station of the pip picture p.25
- Select the station of the tv picture main picture p.25
- Pip scan in the pip picture p.25
- Pip picture as freeze picture p.25
- Picture in picture pip p.25
- Operating modes pip p.25
- Interchanging pip picture tv picture p.25
- Move the pip picture with the arrow keys to a corner of the tv picture in this case the frame around the pip picture has to be green and there should not be any other displays visible on the screen p.26
- In the pip menu you can set the pip type small picture or split screen and the position of the small picture p.26
- Functions in the pip menu p.26
- For the small pip you will see a coloured frame around the pip picture p.26
- Call the pip menu pip must be active green frame p.26
- Call the pip menu pip must be active green bar frame p.26
- You can have the pip picture displayed on the right hand side of the screen both pictures share the screen in two equal halves you will see a coloured verti cal bar between the pictures p.26
- You can have the pip picture displayed as a small pip or split screen p.26
- Switch to split screen p.26
- Switch to small pip p.26
- Setting the pip type p.26
- Select type and then split screen p.26
- Select type and then small pip p.26
- Position of the pip picture p.26
- Operating modes pip p.26
- Using the epg p.27
- Operating modes epg p.27
- Epg programme guide p.27
- Programming recording for recorders p.28
- Operating modes epg p.28
- Epg menu p.28
- Data capture p.28
- Switch on tv when marked p.28
- Selecting providers and stations p.28
- Page selection with the coloured keys p.29
- Other page selection options p.29
- Operating modes teletext p.29
- Displaying teletext pages p.29
- Analogue teletext p.29
- Teletext menu p.30
- Programme timer recordings p.30
- Operating modes teletext p.30
- Digital teletext operation only for mheg 5 device versions p.30
- Radio menu p.31
- Operating modes radio p.31
- Epg programme guide p.31
- Login and connect equipment p.32
- Connecting video dvd recorders p.32
- Operating additional equipment p.32
- Video playback p.33
- Timer recording with video or dvd recorder p.33
- Operating additional equipment p.33
- Calling av input via the station list p.33
- Operating additional equipment p.34
- Audio output audio digital out p.34
- Audio input audio digital in p.34
- Assignment of digital audio inputs and outputs p.34
- Operating additional equipment p.35
- Connecting loewe dvd preceiver auro 2216 ps and individual sound loudspeaker system p.35
- Operating additional equipment p.36
- Connecting other audio amplifi ers or active speakers p.36
- Set geometry p.37
- Operating additional equipment p.37
- Hdmi dvi connection p.37
- Vga xga connection p.37
- Setting colour standard p.37
- Sound from pc or set top box p.38
- Operating additional equipment p.38
- Component video connection p.38
- Use the driver buttons in the tv and stb position for vcr dvd or digital recorder p.39
- Setting the remote control using the suggestions from the remote control p.39
- Setting the remote control using code entry p.39
- Setting the remote control to operate devices from other manufacturers p.39
- Operating other loewe devices with the rc3 remote control p.39
- Operating additional equipment p.39
- Set the rotary switch to dvd p.40
- Operating additional equipment p.40
- In vcr mode the following vcrs can be operated viewvision 8106h 8136h 8176h 6306h 6336h 6376h 6396h 4306h 4376h 2102m 2302m 4206 4236 4276 for other loewe equipment than that listed please use the original remote control p.40
- In the dvd mode it is possible to operate the loewe dvd recorders centros 1102 1172 2102hd 2172hd and the dvd players xemix 6122do 8122da and 6222ps p.40
- Functions for the loewe dvd recorders centros 1102 1172 2102 2172 functions for loewe vcr vv 8106 8136 8176 p.40
- Using the rc3 remote control to operate a vcr p.40
- Using the rc3 remote control to operate a dvd recorders or dvd player p.40
- The infrared code and the functions for a loewe vcr are preset at the factory p.40
- The infrared code and the functions are preset at the factory for the loewe dvd recorder centros 21x2 hd p.40
- Set the rotary switch to vcr p.40
- Setting the range of rotation basic adjustment p.41
- Setting the position of the tv set when switched off p.41
- Rotating the tv set for spheros r 32 37 p.41
- Operating additional equipment p.41
- What to do if p.42
- Problem possible cause remedy p.42
- What to do if p.43
- Problem possible cause remedy p.43
- The code number 3001 cancels out a secret code and with it the child lock please keep in a safe place p.44
- Technical data p.44
- General data p.44
- Technical data p.45
- Electrical data p.45
- Connections p.45
- Pip tuner p.46
- Wall holders and stands p.46
- Vesa adapter p.46
- Loewe dvd players and recorders p.46
- Loewe audio system auro and the active speaker system individual sound p.46
- Digital twin satellite tuner p.46
- Digital satellite tuner p.46
- Accessories p.46
- Retrofi tting options p.47
- Accessories p.47
- Service p.48
- Codelist rc3 lista de códigos rc3 p.49
- Codelist rc3 lista de códigos rc3 p.50
- Sat stb p.51
- Codelist rc3 lista de códigos rc3 p.51
- Codelist rc3 lista de códigos rc3 p.52
- Codelist rc3 lista de códigos rc3 p.53
- Cable box stb p.53
Похожие устройства
-
Loewe BluTech VisionИнструкция по эксплуатации -
Loewe Art 32 SL Full-HD+ 100Инструкция по эксплуатации -
Loewe Art 47 SL Full-HD+ 100Инструкция по эксплуатации -
Loewe Art 42 SL Full-HD+ 100Инструкция по эксплуатации
-
Loewe Art 37 SL Full-HD+ 100Инструкция по эксплуатации
-
Loewe Spheros 20Инструкция по эксплуатации -
Loewe Xelos A 42 HD+ 100Инструкция по эксплуатации -
Loewe Xelos A 42Инструкция по эксплуатации -
Loewe Xelos A 37 Full-HD+ 100Инструкция по эксплуатации -
Loewe Xelos A 37Инструкция по эксплуатации
-
Loewe Xelos A 32 Full-HD+ 100Инструкция по эксплуатации
-
Loewe Xelos A 32Инструкция по эксплуатации