Netgear WNDR4500 — настройка LAN для беспроводного маршрутизатора: пошаговое руководство [35/132]

Превью страниц Страница 35 / 132

NETGEAR genie Advanced Home

N900 Wireless Dual Band Gigabit Router WNDR4500

LAN Setup

The LAN Setup screen allows configuration of LAN IP services such as Dynamic Host

Configuration Protocol (DHCP) and Routing Information Protocol (RIP).

The router is shipped preconfigured to use private IP addresses on the LAN side and to act

as a DHCP server

. The router’

s default LAN IP configuration is:

• L

AN IP address. 192.168.1.1

• Subnet mask. 255

.255.255.0

These addresses are part of the designated private

address range for use in private networks

and should be suitable for most applications. If your network has a requirement to use a

different IP addressing scheme, you can make those changes in the LAN Setup screen.

 To change the LAN settings:

Note: If you change the LAN IP address of the router while connected

through the browser, you will be disconnected. You will have to open

a new connection to the new IP address and log in again.

1. Select Advanced > Setup > LAN Setup to display the following screen:

2. Enter the settings that you want to customize. These settings are described in the following

section, LAN Setup Screen Settings.

3. Click Appl

y to save your changes.