Bose SoundLink Air [10/24] Moving the system after wi fi setup

10 – English

GETTING STARTED

B. Select your Wi-Fi network - This field should display the name of your wire-

less network. If you have more than one, click the triangle ( ) and select the

network you want from the drop-down list.

If your network name does not appear in the list or it is hidden, select Other

from the drop-down list and manually set up your network

C. Enter your network password - If you are using a secured network, enter

your password.

D. Click Connect.

A progress screen is displayed while the system works on connecting. This

may take up to three minutes. You may cancel at any time during the process. If

it fails to make a connection, make sure your network name and password are

correct and try again.

5. Wait for the connection confirmation:

A confirmation dialog is displayed on your computer, the system emits a tone and

the front panel Wi-Fi indicator changes to solid blue.

Your system is now ready to stream audio from an AirPlay compatible device. See

“Listening to an AirPlay compatible device” on page 11.

Moving the system after Wi-Fi setup

After the initial setup, you can move the SoundLink Air system to any location within the

range of your Wi-Fi network. Remove the power cord from the AC outlet, move the

system and plug it in again. The Wi-Fi indicator will start blinking blue as the system

works on automatically connecting to your network again. When connected, the system

will emit a tone and the Wi-Fi indicator will be solid blue.

Note: If you change anything in your Wi-Fi network, or move the system to a location where it is within

the range of a different Wi-Fi network, you will need to run the setup application again. When you move

it back to within range of your original network, the system will automatically connect without needing to

run the setup application again. The system remembers the last four Wi-Fi networks used.

Whippet_OG.book Page 10 Monday, August 6, 2012 11:11 AM