Aten CS72D [24/42] Mouse port switching

CS72D / CS74D User Manual

Mouse Port-switching

The Mouse Port-switching function can be enabled or disabled. The default

setting is disabled. To enable, do the following:

1. Invoke HSM (see page 13).

2. Press [W] or [w] [Enter].

This procedure is a toggle. Repeat to disable.

Note: The feature is only supported when mouse emulation is enabled. See

Mouse Emulation Control, above.

Power On Detection

With the Power On Detection feature, the switch automatically switches to the

next powered-on computer if one computer is powered off. This feature is

enabled by default. To disable Power On Detection, do the following:

1. Invoke HSM (see page 13).

2. Press [E] or [e].

This procedure is a toggle. Repeat to enable.

Keyboard Operating Platform

The CS72D / CS74D’s default port configuration is for a PC compatible

keyboard operating platform. If your console uses a PC compatible keyboard

and you have a Mac attached to a port, for example, you can change the port’s

keyboard operating platform configuration so that the PC compatible keyboard

emulates the Mac keyboard. The procedure is as follows:

1. Bring the KVM focus to the port you want to set.

2. Invoke HSM (see page 13)

3. Press and release the appropriate Function key (see table below). After

completing this procedure, you automatically exit HSM.

(Continues on next page.)