![Aten VM0808H [2/78] 이 기기는 업무용 a 급 전자파 적합기기로서 판매자 또는 사용자 는 이점을 주의하시기 바라며 가정외의 지역에서 사용하는 것을 목적으로합니 다](/img/pdf.png)
Aten VM0808H [2/78] 이 기기는 업무용 a 급 전자파 적합기기로서 판매자 또는 사용자 는 이점을 주의하시기 바라며 가정외의 지역에서 사용하는 것을 목적으로합니 다
![Aten VM0808H [2/78] 이 기기는 업무용 a 급 전자파 적합기기로서 판매자 또는 사용자 는 이점을 주의하시기 바라며 가정외의 지역에서 사용하는 것을 목적으로합니 다](/views2/1211661/page2/bg2.png)
VM0808H User Manual
ii
EMC Information
FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE
STATEMENT
This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is
likely to cause harmful interference in which case the user will be required to correct the
interference at his own expense.
FCC Caution: Any changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate this equipment.
CE Warning: This is a class A product. In a domestic environment this product may cause
radio interference in which case the user may be required to take adequate measures.
KC Information:
이 기기는 업무용(A급)전자파 적합기기로서 판매자 또는 사용자
는 이점을 주의하시기 바라며 , 가정외의 지역에서 사용하는 것을 목적으로합니
다 .
RoHS
This product is RoHS compliant.
Safety
This product has been classified as Information Technology Equipment.
SJ/T 11364-2006
The following contains information that relates to China.
Содержание
- Vm0808h user manual p.1
- 이 기기는 업무용 a 급 전자파 적합기기로서 판매자 또는 사용자 는 이점을 주의하시기 바라며 가정외의 지역에서 사용하는 것을 목적으로합니 다 p.2
- Sj t 11364 2006 p.2
- Safety p.2
- Federal communications commission interference statement p.2
- Emc information p.2
- Online registration p.3
- User notice p.3
- User information p.3
- Telephone support p.3
- Package contents p.4
- Introduction p.5
- Hardware setup p.5
- Front panel operation p.5
- Contents p.5
- Rs 232 commands p.6
- Remote operation p.6
- Appendix p.7
- About this manual p.8
- This manual uses the following conventions p.9
- Product information p.9
- For information about all aten products and how they can help you connect without limits visit aten on the web or contact an aten authorized reseller visit aten on the web for a list of locations and telephone numbers p.9
- Conventions p.9
- This page intentionally left blank p.10
- Overview p.11
- Introduction p.11
- Chapter 1 p.11
- Features p.12
- Source devices p.13
- Requirements p.13
- Display devices p.13
- Cables p.13
- Supported operating systems are shown in the table below p.14
- Source device operating systems p.14
- Note for windows 7 64 bit systems the following must be installed first p.14
- Microsoft office 64 bit access database software and p.14
- Microsoft 64 bit odbc and oledb driver p.14
- Front view p.15
- Components p.15
- Rear view p.16
- Ir remote control p.17
- This page intentionally left blank p.18
- Rack mounting p.19
- Hardware setup p.19
- Chapter 2 p.19
- Grounding p.21
- Cable connection p.22
- Installation diagram p.23
- This page intentionally left blank p.24
- Overview p.25
- Front panel pushbuttons p.25
- Front panel operation p.25
- Chapter 3 p.25
- Enter password p.26
- Main screen p.27
- Vm0808h user manual p.28
- The vm0808h has a built in configuration utility via the front panel lcd which can be controlled by pressing the menu pushbutton cycle through the menu options using the tuner dials starting from set ip port in the order show in the table below p.28
- Menu organization p.28
- Set ip port p.29
- Menu pushbutton p.29
- Ip address p.29
- Subnet mask p.30
- Gateway p.30
- Save and reset exit p.31
- Default ip settings p.31
- Set serial port p.32
- Default serial settings p.32
- Power on detection p.34
- Operation mode p.34
- Security mode p.36
- Password required p.36
- Save load profile p.38
- Profile pushbutton p.39
- Power on off individual output displays p.40
- Ir remote control operation p.40
- Change the input source of an output display p.40
- Power on off all output displays p.41
- This page intentionally left blank p.42
- Remote operation p.43
- Overview p.43
- Logging in p.43
- Chapter 4 p.43
- The vm0808h s gui main page is the connections page this displays all active connections for control and configuration p.44
- Connections page p.44
- Toolbar p.45
- Status colors p.46
- Configuring connections p.46
- Viewing port information p.47
- Save load connection profiles p.47
- Ip setup p.48
- Serial setup p.49
- Port name p.50
- Firmware p.51
- Profile selection p.52
- Add delete selection profile p.52
- Profile selection name p.53
- User management p.54
- Edit user p.55
- Add user p.55
- Privileges p.56
- Overview p.57
- Configuring the serial port p.57
- Chapter 5 p.57
- Rs 232 control tool p.57
- Rs 232 commands p.57
- To turn off output on port 03 type the following p.58
- To switch output port 04 to the next port type the following p.58
- The formula for switch port commands is as follows p.58
- The following table shows the possible values for switch commands p.58
- Switch port commands p.58
- Switch command input command port number output command port number control enter p.58
- Sw o04 enter p.58
- Sw o03 off enter p.58
- Sw i02 o05 enter p.58
- For example to switch input port 02 to output port 05 type the following p.58
- Value will be used p.59
- The port number command string can be skipped and the default p.59
- The following table shows the available command list p.59
- Note 1 each command string can be separated with a space p.59
- You can set up which edid mode the vm0808h uses select one of the 14 available aten default edid configurations and copy the edid of any connected display to the input source with the following command p.60
- The following tables show the possible values and formats for the control command p.60
- Note for the port and default command strings the yy variable must be p.60
- For example to change edid to use the port1 setting type the following p.60
- Entered for the command to work p.60
- Edid port1 enter p.60
- Edid commands p.60
- Edid command control enter p.60
- The following table shows the available command list p.61
- The aten default edid configuration can be selected via the rs 232 command line p.61
- Note 1 each command string can be separated with a space p.62
- Mute o01 on enter p.62
- Mute commands p.62
- Mute command output command port number control enter p.62
- For example to mute the audio coming from output port 1 type the following p.62
- Enable or disable audio coming from the output port s using the following command p.62
- The following table shows the possible values for mute commands p.62
- The following table shows the available command list p.62
- Skip the output port command to mute or enable the audio of all p.62
- Output ports p.62
- To load profile 12 type the following p.63
- The formula for save load profile commands is as follows p.63
- The following table shows the possible values for save load profile commands p.63
- The following table shows the available command list p.63
- Save load profile commands p.63
- Profile f 12 save enter p.63
- Profile f 12 load enter p.63
- Note each command string can be separated with a space p.63
- For example to save the current connection configuration to profile 12 type the following p.63
- Command profile number control enter p.63
- For example to turn on the power on detection feature input the following p.64
- Enabling power on detection means that the vm0808h automatically switches to the next powered on device when one of the hdmi source devices is powered off p.64
- The formula for power on detection commands is as follows p.64
- The following tables show the possible values for the power on detection commands p.64
- The following table shows the available command list p.64
- Power on detection control command enter p.64
- Power on detection commands p.64
- Pod on enter p.64
- To reads and displays information from the device type p.65
- The read command enables you to view information from the device using the following command p.65
- The following table show the possible values and formats for the command p.65
- Read enter p.65
- Read commands p.65
- Read command enter p.65
- Consumer electronics control cec allows interconnected hdmi devices to communicate and respond to one remote control the formula for cec mode selection commands is as follows p.66
- Cec o01 on enter p.66
- Cec commands p.66
- Cec command output command port number control off on enter p.66
- The following tables show the possible values and formats for the control command p.66
- The following table shows the available command list p.66
- Note each command string can be separated with a space p.66
- For example to enable cec function on output port 1 type the following p.66
- You can select the rs 232 baud rate you want the vm0808h to use options are 9600 19200 default 38400 and 115200 p.67
- The formula for baud rate setting command is as follows p.67
- The following tables show the possible values and formats for the control command p.67
- The following table shows the available command list p.67
- Note each command string can be separated with a space p.67
- For example to select 38400 as your baud rate type the following p.67
- Baud rate setting p.67
- Baud command control enter p.67
- Baud 38400 enter p.67
- Note each command string can be separated with a space p.68
- For example to mute the audio type the following p.68
- Enable or disable the on screen display osd using the following command p.68
- The following tables show the possible values and formats for the control command p.68
- The following table shows the available command list p.68
- Osd on enter p.68
- Osd commands p.68
- Osd command control on off enter p.68
- The formula for the echo command is as follows p.69
- The following tables show the possible values and formats for the control command p.69
- The following table shows the available command list p.69
- Note each command string can be separated with a space p.69
- If the echo feature is enabled for each action from the front panel pushbuttons web gui or ir interface the vm0808h sends a corresponding acknowledgment message to the attached controller or management device via the rs 232 port p.69
- For example to enable the echo function type the following p.69
- Echo on enter p.69
- Echo commands p.69
- Echo command control on off enter p.69
- Blackscreen commands p.70
- Blackscreen command control on off enter p.70
- The formula for the blackscreen command is as follows p.70
- The following tables show the possible values and formats for the control command p.70
- The following table shows the available command list p.70
- The blackscreen function when enabled keeps connected displays awake even if there is no source input device detected or when a port is turned off via the switch port command p.70
- Note each command string can be separated with a space p.70
- For example to enable the blackscreen function type the following p.70
- Blackscreen on enter p.70
- You can reset the vm0808h to default factory settings the formula for the reset command is as follows p.71
- The following tables show the possible values and formats for the control command p.71
- The following table shows the available command list p.71
- Reset command enter p.71
- After commands are sent acknowledge messages are returned p.71
- Acknowledge p.71
- This page intentionally left blank p.72
- General p.73
- Appendix p.73
- Safety instructions p.73
- Rack mounting p.75
- Technical support p.76
- North america p.76
- International p.76
- Specifications p.77
- Appendix p.77
- The direct vendor also reserves the right to revise or update the device or documentation without obligation to notify any individual or entity of such revisions or update for further inquiries please contact your direct vendor p.78
- Limited warranty p.78
Похожие устройства
-
Aten VS0202Руководство пользователя -
Aten VS0202Описание и спецификации продукта -
Aten VS0202Краткое руководство по установке -
Aten VS0204Руководство пользователя
-
Aten VS0204Описание и спецификации продукта
-
Aten VS0204Краткое руководство по установке
-
Aten VM0404HРуководство пользователя -
Aten VM0404HРуководство пользователя (RS-232 Control Tool) -
Aten VM0404HОписание и спецификации продукта -
Aten VM0404HКраткое руководство по установке -
Aten VM0808TРуководство пользователя -
Aten VM0808TРуководство пользователя (RS-232 Control Tool)