Fubag WHS 190 DC [2/27] General safety
![Fubag WHS 210 DC Honda 838240 [2/27] General safety](/views2/1213482/page2/bg2.png)
- 1 -
Connections for standby power to a building's electrical system must be
made by a qualified electrician and must comply with all applicable laws and
electrical codes. Improper connections can allow electrical current from the
generator to back feed into the utility lines. Such back feed may electrocute
utility company workers or others who contact the lines during a power
outage, and when utility power is restored, the generator may explode, burn
or cause fires in the building's electrical system.
WARNING!
WARNING!
WARNING!
WARNING!
1. General safety
Exhaust gas contains poisonous carbon monoxide.
Never run the generator in an enclosed area. Be sure to provide adequate
ventilation. When installed in ventilated protection are to be observed.
The muffler becomes very hot during operation and remains hot for a while
after stopping the engine.
Be careful not to touch the muffler while it is hot. Let the engine cool before
storing the generator indoors. The engine exhaust system will be heated
during operation and remain hot immediately after stopping the engine.
To prevent scalding, pay attention to the warning marks attached to the
generator.
Gasoline is extremely flammable and explosive under certain conditions.
Refuel in a well ventilated area with the engine stopped.
Keep away from cigarette, smoke and sparks when refueling the generator.
Always refuel in a well-ventilated location.
Wipe up spilled gasoline at once.
WARNING! BEFORE USING THE MACHINE READ THE INSTRUCTION MANUAL
CAREFULLY!
Our generators are designed to give safe anddependable service if operated
according to instructions.
Read and understand the anual before operating the generator . Failure to
do so could result in personal injury or equipment damage.
FUBAG
FUBAGm
www.fubag.ru
Omperator's anual
Содержание
- Operator s manual инструкция по эксплуатации 1
- General safety 2
- O m perator s anual 2
- O m perator s anual 3
- O m perator s anual 4
- Description 5
- O m perator s anual 5
- O m perator s anual 6
- Putting the power generator into operation 6
- Specifications 6
- O m perator s anual 7
- O m perator s anual 8
- Using the generator set 8
- O m perator s anual 9
- Maintenance 10
- O m perator s anual 10
- Preparation and maintenance in winter time maintenance in winter time is considered to be the period when the temperature of the ambient air is fixed below 5 с the low temperature of the ambient air hampers the engine start negatively influences the operation of all its systems to prepare the generator and provide its further no failure operation it is necessary to make the following steps use up all the old fuel completely discharge the remaining one clean the filter of the fuel valve check the air filter change it if necessary substitute the engine oil for the oil corresponding to the season fill the fuel tank with the fuel to avoid ingress of water and its further freezing in the fuel tank and the carburetor the generator is to be kept in a place at the temperature from 5 с and above in winter time if the engine stops for more than 15 minutes during the operation at negative temperatures it is necessary to place the set into a warm place to prevent the condensate freezing in the bre 10
- The maintenance interval frequency and the operations to be carried out are outlined in the maintenance programme however it should be added that it is the environment in which the generating set is operating which determines this programme accordingly if the set is used in extreme conditions shorter intervals between maintenance procedures should be adopted these maintenance schedules apply only to generating sets running on fuel and oil that conform to the specifications given in this booklet 10
- O m perator s anual 11
- O m perator s anual 12
- Preparation for storage 12
- O m perator s anual 13
- Trouble shooting 13
- When engine fails to start 13
- When no electricity is generated at receptacle 13
- When welder engine fails to start after several attempts or if no electricity is available at the output socket check the following chart if your welder still fails to start or have no electricity contact your nearest welder dealer for further information or corrective procedures 13
- Iring diagram w 14
- O m perator s anual 14
- Warranty 14
- Инструкция по эксплуатации 15
- Правила безопасности 15
- Инструкция по эксплуатации 16
- Инструкция по эксплуатации 17
- Меры безопасности при сварочных работах 17
- Инструкция по эксплуатации 18
- Описание 18
- Ввод в эксплуатацию 19
- Инструкция по эксплуатации 19
- Технические характеристики 19
- Инструкция по эксплуатации 20
- Инструкция по эксплуатации 21
- Эксплуатация 21
- Инструкция по эксплуатации 22
- Инструкция по эксплуатации 23
- Обслуживание аппарата может производиться только квалифицированным персоналом всегда выключайте электростанцию и снимайте колпачок свечи зажигания проводите следующие работы по обслуживанию регулярно и с соблюдением указанных интервалов 23
- Техническое обслуживание 23
- Эксплуатация в зимний период зимним периодом эксплуатации считается такой период когда температура окружающего воздуха устанавливается ниже 5 с низкая температура окружающего воздуха затрудняет пуск двигателя оказывает отрицательное влияние на работу всех его систем для подготовки электростанции безаварийной его эксплуатации необходимо полностью выработать старое топливо остатки топлива слить через дренажное отверстие в нижней части карбюратора произвести очистку фильтра топливного крана проверить свечу зажигания если имеются повреждения либо на керамической наружной части корпуса есть коричневый налет необходимо заменить свечу проверить воздушный фильтр при необходимости заменить его заменить моторное масло на соответствующее сезону в топливный бак залить отстоянный бензин во избежание попадания и дальнейшего замерзания воды в топливном баке и карбюраторе в зимнее время электростанция должна храниться в помещении с температурой выше 5 если во время работы при отрицательных температура 23
- Инструкция по эксплуатации 24
- Инструкция по эксплуатации 25
- Консервирование электростанции 25
- Если в розетке отсутствует напряжение 26
- Если двигатель не запускается 26
- Если после нескольких попыток электростанция не запускается или на выходной розетке отсутствует напряжение тогда выполните процедуры которые указаны ниже если двигатель все равно не запускается или отсутствует напряжение тогда обратитесь в ближайший официальный сервисный центр для получения дополнительной информации 26
- Инструкция по эксплуатации 26
- Неисправности и их устранение 26
- Гарантийные обязательства 27
- Инструкция по эксплуатации 27
- Схема электрическая 27
Похожие устройства
- Fubag WHS 210 DC Инструкция по эксплуатации
- Fubag WHS 200 DC Инструкция по эксплуатации
- Fubag WHS 200 AC Инструкция по эксплуатации
- Fubag WHS 220 DDC Инструкция по эксплуатации
- Fubag PTH 600 Инструкция по эксплуатации
- Fubag PTH 1000 Инструкция по эксплуатации
- Fubag PTH 400 H Инструкция по эксплуатации
- Fubag PTH 600 ST Инструкция по эксплуатации
- Fubag PTH 1000 ST Инструкция по эксплуатации
- Fubag PTH 1000 T Инструкция по эксплуатации
- Fubag PTH 1600 T Инструкция по эксплуатации
- Fubag PTH 1600 Инструкция по эксплуатации
- Fubag PG 1800 T Инструкция по эксплуатации
- Fubag PG 1600 Инструкция по эксплуатации
- Fubag PG 1000 Инструкция по эксплуатации
- Fubag PG 80 H Инструкция по эксплуатации
- Fubag PG 600 Инструкция по эксплуатации
- Fubag PG 1300 T Инструкция по эксплуатации
- Fubag PG 300 Инструкция по эксплуатации
- Fubag PG 950 T Инструкция по эксплуатации
Скачать
Случайные обсуждения