Caso m 20 electronic pure white [49/168] Glass turntable

Caso m 20 electronic pure white [49/168] Glass turntable
caso M20 electronic (pure white) 49
Set the radio, the television, etc as far as possible away from the
device.
Connect the device to a different electrical outlet, so that various power
circuits are used for the device and the receiver with the interference.
Use a properly installed antenna for the receiver, to ensure good
reception.
10.10 Assembling the accessories
10.10.1 Glass turntable
Assemble the glass turntable as follows:
Insert the rolling ring
Insert the glass turntable so the groove on the underneath side of the
glass turntable catch in the drive shaft.
10.11 Electrical connection
In order to ensure the safe and trouble-free operation of the device, the
following instructions must be observed for the electrical connection:
Before connecting the device, compare the connection data (voltage
and frequency) on the rating plate with those of your electrical network.
This data must agree in order that no damages occur in the device
If in doubt, ask your qualified electrician.
The electrical outlet must be protected by a 16A safety cut-out switch.
The connection between the device and the electrical network may
employ a 3 meter long (max.) extension cable with a cross-section of
1.5 mm². The use of multiple plugs or gangs is prohibited because of
the danger of fire that is involved with this.
Make sure that the power cable is undamaged and has not been
installed under the oven or over hot or sharp surfaces.
The electrical safety of the device is only guaranteed if the device is
connected to a properly installed protective conductor system.
Operations using an electrical outlet without a protective conductor are
prohibited. If in doubt, have the house installation checked over by a
qualified electrician.
The manufacturer cannot be made responsible for damages that are
caused by a missing or damaged protective conductor.

Содержание

Скачать