Grohe eurosmart cosmopolitan e 36330001 [7/64] Fault cause remedy

Grohe eurosmart cosmopolitan e 36327001 [7/64] Fault cause remedy
4
Replacement parts,
see fold-out page I (* = special accessories)
Care
For directions on the care of this fitting, please refer to the
accompanying Care Instructions.
Fault / Cause / Remedy
Fault Cause Remedy
Water not flowing Filter upstream of solenoid valve blocked
Solenoid valve defective
Plug-in connector without contact
No voltage
- Battery discharged
(indicator lamp lights up continuously)
- Power supply unit defective
- Clean filter
- Replace solenoid valve
- Check plug-in connector
- Replace battery
- Replace power supply unit
Undesired water
flow
Sensor system detection zone set too high
for local conditions
Automatic flushing activated
Solenoid valve defective
- Reduce range using remote control (special
accessory, prod. no.: 36 407) / app
- Wait 1 - 10 minutes
- Replace solenoid valve
Flow rate too low Mousseur dirty
Filter upstream of solenoid valve dirty
Filters in connection hose dirty
- Clean or replace mousseur
- Clean filter
- Clean or replace filters
Bluetooth
®
Connection not
possible
No reception/connection interrupted
Interferences in the reception area
Obstacle in transmission path
Water is flowing / Object detection
- Turn back the device to receiving range
- Turn off the source of interference
(observe manufacturer´s documentation)
- Remove from radio path
- The detection zone must kept clear
Interrupted while
operating
Interferences in the reception area
Obstacle in transmission path
- Turn off the source of interference
(observe manufacturer´s documentation)
- Remove from radio path

Содержание

Похожие устройства