Stanley stsp125 [4/56] English
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Stanley stsp125 [4/56] English

Stanley stsp125 [4/56] English
ENGLISH
4
(Original instructions)
4. Power Tool Use and Care
a. Do not force the power tool. Use the correct power
tool for your application. The correct power tool will do
the job better and safer at the rate for which it was
designed.
b. Do not use the power tool if the switch does not turn
it on and off. Any power tool that cannot be controlled
with the switch is dangerous and must be repaired.
c. Disconnect the plug from the power source and/or
the battery pack from the power tool before making
any adjustments, changing accessories, or storing
power tools. Such preventive safety measures reduce
the risk of starting the power tool accidentally.
d. Store idle power tools out of the reach of children
and do not allow persons unfamiliar with the power
tool or these instructions to operate the power tool.
Power tools are dangerous in the hands of untrained
users.
e. Maintain power tools. Check for misalignment or
binding of moving parts, breakage of parts and any
other condition that may affect the power tools
operation. If damaged, have the power tool repaired
before use. Many accidents are caused by poorly
maintained power tools.
f. Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges are
less likely to bind and are easier to control.
g. Use the power tool, accessories and tool bits etc., in
accordance with these instructions taking into
account the working conditions and the work to be
performed. Use of the power tool for operations
different from those intended could result in a hazardous
situation
5. Service
a. Have your power tool serviced by a qualified repair
person using only identical replacement parts. This
will ensure that the safety of the power tool is
maintained.
Safety Instructions For Abrasive Cuttingoff
Operations Cut-off Machine Safety Warnings
a) The guard provided with the tool must be securely
attached to the power tool and positioned for
maximum safety, so the least amount of wheel is
exposed towards the operator. Position yourself and
bystanders away from the plane of the rotating
wheel. The guard helps to protect operator from broken
wheel fragments and accidental contact with wheel.
b) Use only diamond cut-off wheels for your power
tool. Just because an accessory can be attached to your
power tool, it does not assure safe operation.
Note: Use the wording “diamond” as applicable depending
on the designation of the tool.
c) The rated speed of the accessory must be at least
equal to the maximum speed marked on the power
tool. Accessories running faster than their rated speed
can break and fly apart.
d) Wheels must be used only for recommended
applications. For example: do not grind with the side
of cut-off wheel. Abrasive cut-off wheels are intended
for peripheral grinding, side forces applied to these
wheels may cause them to shatter.
e) Always use undamaged wheel flanges that are of
correct diameter for your selected wheel. Proper
wheel flanges support the wheel thus reducing the
possibility of wheel breakage.
f) Do not use worn down reinforced wheels from larger
power tools. Wheels intended for a larger power tool are
not suitable for the higher speed of a smaller tool and
may burst.
Note: The above warning does not apply for tools only
designated to be used with diamond wheels.
g) The outside diameter and the thickness of your
accessory must be within the capacity rating of your
power tool. Incorrectly sized accessories cannot be
adequately guarded or controlled.
h) The arbour size of wheels and flanges must properly
fit the spindle of the power tool. Wheels and flanges
with arbour holes that do not match the mounting
hardware of the power tool will run out of balance, vibrate
excessively and may cause loss of control.
i) Do not use damaged wheels. Before each use,
inspect the wheels for chips and cracks. If power
tool or wheel is dropped, inspect for damage or
install an undamaged wheel. After inspecting and

Содержание

Похожие устройства

ENGLISH Original instructions 4 Power Tool Use and Care maximum safety so the least amount of wheel is exposed towards the operator Position yourself and a Do not force the power tool Use the correct power tool for your application The correct power tool will do the job better and safer at the rate for which it was bystanders away from the plane of the rotating wheel The guard helps to protect operator from broken wheel fragments and accidental contact with wheel designed b Use only diamond cut off wheels for your power b Do not use the power tool if the switch does not turn it on and off Any power tool that cannot be controlled tool Just because an accessory can be attached to your power tool it does not assure safe operation with the switch is dangerous and must be repaired Note Use the wording diamond as applicable depending c Disconnect the plug from the power source and or the battery pack from the power tool before making any adjustments changing accessories or storing on the designation of the tool c The rated speed ofthe accessory must be at least power tools Such preventive safety measures reduce equal to the maximum speed marked on the power the risk of starting the power tool accidentally tool Accessories running faster than their rated speed can break and fly apart d Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power d Wheels must be used only for recommended tool or these instructions to operate the power tool applications For example do not grind with the side Power tools are dangerous in the hands of untrained of cut off wheel Abrasive cut off wheels are intended users for peripheral grinding side forces applied to these e Maintain power tools Check for misalignment or binding of moving parts breakage of parts and any wheels may cause them to shatter e Always use undamaged wheel flanges that are of other condition that may affect the power tools correct diameter for your selected wheel Proper operation If damaged have the power tool repaired wheel flanges support the wheel thus reducing the before use Many accidents are caused by poorly possibility of wheel breakage maintained power tools f Do not use worn down reinforced wheels from larger f Keep cutting tools sharp and clean Properly power tools Wheels intended for a larger power tool are maintained cutting tools with sharp cutting edges are not suitable for the higher speed of a smaller tool and less likely to bind and are easier to control may burst g Use the power tool accessories and tool bits etc in accordance with these instructions taking into Note The above warning does not apply for tools only designated to be used with diamond wheels account the working conditions and the work to be performed Use ofthe power tool for operations g The outside diameter and the thickness of your different from those intended could result in a hazardous accessory must be within the capacity rating of your situation power tool Incorrectly sized accessories cannot be adequately guarded or controlled 5 Service h The arbour size of wheels and flanges must properly a Have your power tool serviced by a qualified repair person using only identical replacement parts This will ensure that the safety ofthe power tool is maintained Safety Instructions For Abrasive Cuttingoff Operations Cut off Machine Safety Warnings a The guard provided with the tool must be securely attached to the power tool and positioned for fit the spindle of the power tool Wheels and flanges with arbour holes that do not match the mounting hardware ofthe power tool will run out of balance vibrate excessively and may cause loss of control i Do not use damaged wheels Before each use inspect the wheels for chips and cracks If power tool or wheel is dropped inspect for damage or install an undamaged wheel After inspecting and

Скачать