Al-Ko 112927 GTLi 18V Comfort [10/18] Spec no inr18650 13q version no 1

-SAMSUNG SDI Confidential Proprietary –

Spec. No.

INR18650-13Q Version No.

1.0

3.1 Discharging

3.1.1 The cell should be discharged at less than maximum discharge current

specified in the product specification.

3.2 Discharging temperature

3.2.1 The cell should be discharged within a range of temperatures specified in

the product specification.

3.2.2 Otherwise, it may cause loss of characteristics.

3.3 Over-discharging

3.3.1 The system should equip with a device to prevent further discharging

exceeding discharging cut-off voltage specified in the product

specification.(over-discharging)

3.3.2 Over-discharging may cause loss of performance, characteristics, of

battery function.

3.3.3 Over-discharging may occur by self-discharge if the battery is left for

a very long time without any use.

3.3.4 The charger should equip with a device to detect cell voltage and to

determine recharging procedures.

4. Storage

4.1 Storage conditions

4.1.1 The cell should be stored within a range of temperatures specified

in the product specification.

4.1.2 Otherwise, it may cause loss of characteristics, leakage and/or rust.

4.2 Long-term storage

4.2.1 The cell should be used within a short period after charging because

long-term storage may cause loss of capacity by self-discharging.

4.2.2. If long-term storage is necessary, the cell should be stored at lower

voltage within a range specified in the product specification, because

storage at higher voltage may cause loss of characteristics.

5. Cycle life

5.1 Cycle life performance

5.1.1 The cell can be charged/discharged repeatedly up to times specified in

the produce specification with a certain level of capacity also specified

in the product specification.

5.1.2 Cycle life may be determined by conditions of charging, discharging,

operating temperature and/or storage.

6. Design of System