Sony PlayStation 3 320GB + ASSASSINS CREED BROTHERHOOD [18/116] Getting started

Getting started

Adjusting video output settings

Depending on the type of cables and the connectors used, you may

need to adjust the PS3™ system's video output settings to display

video at HD resolutions ( page 16) on a TV.

If video is not displayed



Switch the video input of the TV to match the input connector used to

connect to the system.



Turn off the system, and then turn it on again by pressing the power button

for at least five seconds (until the system beeps a second time). The video

output setting will be reset and video will be output at standard definition

(SD) resolution.

1 Select (Settings) (Display Settings) [Video Output

Settings], and then press the button.

2 Select the input connector ( page 17) in use on the TV, and

then press the button.

If you select [HDMI], you will have the option to choose [Automatic] or

[Custom] on the next screen. In most cases, select [Automatic], and video

output settings will be completed automatically.

If you select [AV MULTI / SCART], you must choose the type of output signal

on the next screen. In most cases, select [Y Pb/Cb Pr/Cr].

3 Confirm the screen, and then press the button.

If you changed the connector in step 2, a screen for confirming the change

will be displayed.

4 Confirm the settings, select [Yes], and then press the button.

If you changed the connector in step 2, a screen for confirming the settings

will be displayed.

5 Select the resolutions supported by the TV, and then press the

button.

The resolution displayed on the TV varies depending on the input connector

and the type of cable used (

page 17). The highest resolution you

selected will be used for video output.

Depending on the connector selected in step 2, this screen may not be

displayed.