Vitek VT-1848 R [5/40] English
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Vitek VT-1848 R [5/40] English

Vitek VT-1848 BK [5/40] English
5
E N G L I S H
age of electric motor. Keep in mind that such
cases are not covered by warranty.
• Do not use the vacuum cleaner, if:
– dust container is not installed;
– inlet and outlet filters are not installed.
• Regularly check the integrity of power cord
and plug. If the power cord or the plug is
damaged or in case of vacuum cleaner mal-
function contact the authorized service cen-
ter.
THE UNIT IS INTENDED FOR HOUSEHOLD
USAGE ONLY
Safety measures
– If the suction power of the vacuum cleaner
has decreased while cleaning, switch it off
immediately and check the telescopic pipe
and the flexible hose for obstruction. Switch
off the vacuum cleaner, unplug it, remove the
obstruction and only after that you can con-
tinue cleaning.
• Do not use the vacuum cleaner near hot
surfaces, ashtrays and in the places where
inflammable liquids are stored.
• Insert the power plug into the mains sock-
et only with dry hands.
• When unplugging the unit, pull the plug
but not cord.
Assembling of vacuum cleaner
Unpack the vacuum cleaner and check it for
damages. Before switching on make sure that
voltage of the electric network corresponds to
the operating voltage of the vacuum cleaner.
Always switch off the vacuum cleaner and unplug
it while replacing the brush-attachments and dur-
ing maintenance.
1. Attaching and removing of flexible hose
To connect the flexible hose (4) Insert the flexible
hose nozzle (5) into the air inlet (7) located on the
front part of the vacuum cleaner (pic. 1).
Insert the hose until click that indicates proper
connection. To remove the flexible hose press
the clamping button (6) and detach the hose.
2. Attaching of telescopic tube and brush
attachments
• Attach the telescopic extension pipe (2) to
the handle of the flexible hose (4) (pic. 2).
• Extend the lower part of telescopic extension
pipe to the required length, having prelimi-
nary pressed the clamping button (pic. 3).
• Select the required attachment: floor/carpet
brush (1), small brush (24), crevice nozzle
(23) or furniture brush (25) and attach it to
the telescopic extension pipe (pic. 4).
USING OF BRUSH ATTACHMENTS
Carpet/floor brush (1)
Set the switch on the brush to the required posi-
tion (depending on the type of the surface being
cleaned).
Crevice nozzle (23)
This attachment is intended for cleaning of
radiators, grooves, corners and spaces between
cushions.
Small brush (24)
The brush is intended for collecting of dust from
furniture surface, pile prevents damage of pol-
ished furniture surface.
Furniture brush (25)
The attachment is intended for cleaning fabric
surfaces of upholstered furniture.
Operation
Before using the unit unwind the power cord to
the required length and insert the plug into the
socket. Yellow mark on the power cord indicates
the maximum cord length. Do not unwind the
power cord further than the red mark.
Always switch on the vacuum cleaner with the
installed dust container and filters inside.
1. Press the ON/OFF button (11) to switch the
vacuum cleaner on.
2. After you finish room cleaning press the ON/
OFF button (11) to switch vacuum cleaner
off.
3. To wind the cord press the cord winding but-
ton (12), hold the winding cord with hand in
order to avoid its whipping and damage.
4. Between operations use the brush storage
space (13).
Maintenance
Detaching of dust container (8) and removal
of dust and trash from it (Pic. 5, 6)
• Switch off and unplug the unit.
• Take the handle (10) of the dust container
(8), press the button (16) and detach the
container.
VT-1848_IM.indd 5 28.06.2012 10:11:14

Содержание

Похожие устройства

Скачать