Home
Главная
Gross
Пневматическая Дрель
g302 57449
Инструкция по эксплуатации Страница: 11

Gross g302 57449 [11/20] Maintenance

Содержание

Похожие устройства

To lubricate the tool apply air tool oils with ISO VG 32 vis cosity ply and 2 an automatic droplets per air minute line If lubricator the use adjusted of an to sup automatic air line is not possible apply 4 5 droplets of air tool oil to the inlet pipe opening oil with higher Always first connect and then before each viscosity the air connect use may of supply hose it the to the deteriorate to tool Using of performance the tool air preparation cleaning it wipe the tool with a dry cloth Motor vanes should be checked on a regular basis by specialists and changed if necessary The scheduled maintenance of the tool should be performed at least once per 6 months All tool repair operations should be performed by qualified specialists of service centres with the use of original spare parts at unit Install the drive socket on the square connection NOTE The rotation control switch may only be used when the tool isturned off To turn on the tool press the switch and hold it pressed when performing a work operation To turn off the tool release the switch NOTE Disconnect the air supply hose from the tool before changing its accessories or adjusting it MAINTENANCE Disconnect the air supply hose from the tool before changing its accessories or adjusting it Regularly clean the mesh filter at the air inlet For this purpose unscrew the branch pipe connecting the hose and remove dust and dirty from the filter After that install the branch pipe connecting the hose and fix it securely To prevent corrosion which is a reason of deterioration of vanes valves etc it is necessary to drip some droplets of ISO VG32 motor oil connect the tool to an air line and turn on the tool at idle speed for 5 10 seconds In case of long downtime or before the first switching on always perform this procedure After the work always clean the tool of dirty Do not use any substances containing chlorine gasoline or solvents After TRANSPORTATION Transportation can be performed in all types of enclosed trans port in accordance with the transportation rules valid for each type of transport Transportation conditions in relation to climatic factors Ambient temperature 20 to 55 C Relative air humidity 80 at temperature of 20 C During transportation and cargo handling operations the pack aging with the tool should not be exposed to sharp impacts and influence of atmospheric precipitation Placement and fastening of a transport container with the packed tool in motor vehicles should provide steady position and absence of its movement during transportation STORAGE Store the tool in a dry well ventilated premise Preserve the tool for long storage lubricate its body with a thin layer of oil pack it into a standard box Store it at the ambient temperature of 0 to 40 C and relative air humidity no more than 80 in a place inaccessible to children Storage time is not limited If the tool is seriously damaged has the operating life expired and cannot be used anymore dispose it according to the metals dis posal rules Never burn or heat the tool this is dangerous for life