Gigabyte GA-X99-Gaming 7 WIFI [21/136] 7 back panel connectors

- 21 -

Hardware Installation

1-7 Back Panel Connectors

USB 2.0/1.1 Port

TheUSBportsupportstheUSB2.0/1.1specication.YoucanconnectaUSBDACtothisportorusethis

portforUSBdevicessuchasaUSBkeyboard/mouse,USBprinter,USBashdriveandetc.

PS/2 Keyboard/Mouse Port

Use this port to connect a PS/2 mouse or keyboard.

CPU Overclocking Button

Press this button to overclock your CPU. To return to the defaults, press this button again.

Fast Boot Button

PressthisbuttondowntoenablethefastbootfunctiontoshortenOSboottime.(Makesuretosetthis

buttonbeforesystempower-on;otherwise,itwilltakeeffectatnextboot.)

Clear CMOS Button

UsethisbuttontocleartheCMOSvalues(e.g.BIOSconguration)andresettheCMOSvaluestofactory

defaults when needed.

USB 3.0/2.0 Port

TheUSB3.0portsupportstheUSB3.0specicationandiscompatibletotheUSB2.0/1.1specication.

UsethisportforUSBdevicessuchasaUSBkeyboard/mouse,USBprinter,USBashdriveandetc.

USB 3.0/2.0 Port (White)

TheUSB3.0portsupportstheUSB3.0specicationandiscompatibletotheUSB2.0/1.1specication.

UsethisportforUSBdevicessuchasaUSBkeyboard/mouse,USBprinter,USBashdriveandetc.

BeforeusingQ-FlashPlus,makesuretoinserttheUSBashdriveintothisportrst.

RJ-45 LAN Port (LAN2)

The Gigabit Ethernet LAN port provides Internet connection at up to 1 Gbps data rate. The following

describes the states of the LAN port LEDs.

• Whenremovingthecableconnectedtoabackpanelconnector,rstremovethecablefromyour

device and then remove it from the motherboard.

• When removing the cable, pull it straight out from the connector. Do not rock it side to side to

prevent an electrical short inside the cable connector.

Activity LED

Connection/

Speed LED

LAN Port

Activity LED:Connection/Speed LED:

State Description

Orange 1 Gbps data rate

Green 100 Mbps data rate

Off 10 Mbps data rate

State Description

Blinking Data transmission or receiving is occurring

On No data transmission or receiving is occurring