![Gigabyte GA-X99-Gaming 7 WIFI [78/136] Rapid recover technology provides data protection by allowing users to easily restore data and system operation using a designated recovery drive with the rapid...](/img/pdf.png)
Gigabyte GA-X99-Gaming 7 WIFI [78/136] Rapid recover technology provides data protection by allowing users to easily restore data and system operation using a designated recovery drive with the rapid...
![Gigabyte GA-X99-Gaming 7 WIFI (rev. 1.0) [78/136] Rapid recover technology provides data protection by allowing users to easily restore data and system operation using a designated recovery drive with the rapid recovery technology which employs raid 1 functionality users can copy the data from the master drive to the recovery drive if needed the data on the recovery drive can be restored back to the master drive](/views2/1232990/page78/bg4e.png)
Conguring SATA Hard Drive(s)
- 78 -
Recovery Volume Options
Intel
®
Rapid Recover Technology provides data protection by allowing users to easily restore data and system
operation using a designated recovery drive. With the Rapid Recovery Technology, which employs RAID 1
functionality, users can copy the data from the master drive to the recovery drive; if needed, the data on the
recovery drive can be restored back to the master drive.
Before you begin:
• The recovery drive must have equal or greater capacity than the master drive.
• A recovery volume can be created with two hard drives only. A recovery volume and a RAID array cannot
co-exist in the system at the same time, that is, if you have already created a recovery volume, you are
unable to create a RAID array.
• By default, only the master drive can be viewed in the operating system; the recovery drive is hidden.
Step 1:
Select Create RAID Volume in MAIN MENUandpress<Enter>(Figure15).
Figure 15
Figure 16
Step 2:
After entering the volume name, select Recovery under the RAID Levelitemandpress<Enter>(Figure16).
Intel(R) Rapid Storage Technology - Option ROM - 13.1.0.2126
Copyright (C) Intel Corporation. All Rights Reserved.
RAID Volumes :
None dened.
Physical Disks :
ID Drive Model Serial # Size Type/Status(Vol ID)
1 Hitachi HDS72105 JP1532FR3BWV7K 465.7GB Non-RAID Disk
2 Hitachi HDS72105 JP1532ER046M2K 465.7GB Non-RAID Disk
[
hi
]-Select [ESC]-Exit [ENTER]-Select Menu
[ DISK/VOLUME INFORMATION ]
[ MAIN MENU ]
4. Recovery Volume Options
5. Acceleration Options
6. Exit
1. Create RAID Volume
2. Delete RAID Volume
3. Reset Disks to Non-RAID
Intel(R) Rapid Storage Technology - Option ROM - 13.1.0.2126
Copyright (C) Intel Corporation. All Rights Reserved.
Recovery: Copies data between a master and a recovery disk.
[
hi
]-Change [TAB]-Next [ESC]-Previous Menu [ENTER]-Select
[ HELP ]
Name : Volume0
RAID Level : Recovery
Disks : Select Disks
Strip Size : N/A
Capacity : 465.7 GB
Sync : Continuous
Create Volume
[ CREATE VOLUME MENU ]
Содержание
- Aug 15 2014 2
- Ga x99 gaming 7 wifi 2
- Motherboard 2
- See the latest safety and regulatory documents at gigabyte s website 2
- Wireless module country approvals 2
- Copyright 3
- Disclaimer 3
- Documentation classifications 3
- Identifying your motherboard revision 3
- Box contents optional items 4
- Chapter 1 hardware installation 4
- Chapter 2 bios setup 9 4
- Chapter3configuringsataharddrive s 9 4
- Ga x99 gaming 7 wifi motherboard layout ga x99 gaming 7 wifi motherboard block diagram 4
- Table of contents 4
- 1 bios update utilities 87 5
- 1 chipset drivers 5 5
- 1 qualcom 5
- 2 app center 2 5
- 2 application software 6 5
- 2 configuringaudioinputandoutput 14 5
- 3 information 6 5
- 3 troubleshooting 122 5
- 4 debug led codes 125 5
- Atheros killer network manager 13 5
- Chapter 4 drivers installation 5 5
- Chapter 5 unique features 7 5
- Chapter 6 appendix 113 5
- Regulatory statements 129 contact us 135 5
- Box contents 6
- Optional items 6
- Ga x99 gaming 7 wifi 7
- Ga x99 gaming 7 wifi motherboard layout 7
- Note fordebugcodeinformation pleaserefertochapter6 7
- Ga x99 gaming 7 wifi motherboard block diagram 8
- 1 installation precautions 9
- Chapter 1 hardware installation 9
- 2 product specifications 10
- 2 productspecifications 10
- 3 1 installing the cpu 13
- 3 installing the cpu and cpu cooler 13
- 3 2 installing the cpu cooler 15
- 4 1 4 channel memory configuration 16
- 4 1 4channelmemoryconfiguration 16
- 4 installing the memory 16
- Always turn off the computer and unplug the power cord from the power outlet before installing the 16
- At the same time 16
- Capacity brand speed and chips be used gotogigabyte swebsiteforthelatestsupportedmemoryspeedsandmemorymodules 16
- Channel a ddr4_1_1a ddr4_2_2a 16
- Channel b ddr4_3_1b ddr4_4_2b 16
- Channel c ddr4_5_1c ddr4_6_2c 16
- Channel d ddr4_7_1d ddr4_8_2d 16
- Ddr4_3_1b ddr4_5_1c and ddr4_7_1d 16
- Hardware installation 16 16
- If you are unable to insert the memory switch the direction 16
- Memory modules have a foolproof design a memory module can be installed in only one direction 16
- Memory to prevent hardware damage 16
- Note 2 if you are using a rdimm memory make sure it is a 1rx8 one note 3 to ensure memory compatibility we do not recommend that you install rdimm and udimm memory 16
- Note1 wheninstallingthememory makesuretobeginwiththefirstsocketofeachchannel suchasddr4_1_1a 16
- Read the following guidelines before you begin to install the memory make sure that the motherboard supports the memory it is recommended that memory of the same 16
- Refer to the table below for memory installation according to the number of the memory modules you want to install 16
- This motherboard provides eight ddr4 memory sockets and supports 4 channel technology after the memory isinstalled thebioswillautomaticallydetectthespecificationsandcapacityofthememory theeightddr4 memory sockets are divided into four channels and each channel has two memory sockets as following 16
- 4 2 installing a memory 17
- 5 installing an expansion card 18
- 6 setting up amd crossfir 19
- 6 setting up amd crossfire nvidia sli configuration 19
- A system requirements 19
- B connecting the graphics cards 19
- Configuration 19
- C configuringthegraphicscarddriver 20
- 7 back panel connectors 21
- Clear cmos button 21
- Cpu overclocking button 21
- Fast boot button 21
- Ps 2 keyboard mouse port 21
- Rj 45 lan port lan2 21
- Usb 2 1 port 21
- Usb 3 2 port 21
- Usb 3 2 port white 21
- Center subwoofer speaker out jack 22
- Hardware installation 22 22
- Headphone speaker out jack 22
- Line in mic in jack 22
- Line out 22
- Optical s pdif out connector 22
- Rear speaker out 22
- Refertotheinstructionsonsettingupa2 5 channelaudioconfigurationinchapter6 configuring 2 5 channel audio 22
- Rj 45 lan port lan1 22
- Sma antenna connectors 2t2r 22
- The gigabit ethernet lan port provides internet connection at up to 1 gbps data rate the following describes the states of the lan port leds 22
- The line in mic in jack use this audio jack for line in devices such as optical drive walkman microphone etc 22
- The line out jack use this audio jack for a 2 channel speaker this jack can be used to connect front speakersina5 channelaudioconfiguration 22
- This audio output jack supports audio amplifying function for better sound quality it is recommended that you connect your headphone speaker to this jack 22
- This connector provides digital audio out to an external audio system that supports digital optical audio before using this feature ensure that your audio system provides an optical digital audio in connector 22
- Tighten the antenna cables to the antenna connectors and then move the antenna to a place where the signal is good 22
- Use this connector to connect an antenna 22
- Usethisaudiojacktoconnectcenter subwooferspeakersina5 channelaudioconfiguration 22
- Usethisaudiojacktoconnectrearspeakersina5 channelaudioconfiguration 22
- 8 installing the i o shield 23
- 9 onboard buttons switches and leds 24
- Aftersystemrestart gotobiossetuptoloadfactorydefaults selectloadoptimizeddefaults or 24
- Always turn off your computer and unplug the power cord from the power outlet before clearing 24
- And data loss or damage may occur 24
- Backupbios bootfromthebackupbios 24
- Bbios_led thebackupbiosisactive 24
- Bios led indicators 24
- Bios switches and bios led indicators 24
- Bios_sw 24
- Direct to bios button 24
- Dual bios 24
- Hardware installation 24 24
- Mainbios bootfromthemainbios 24
- Manuallyconfigurethebiossettings refertochapter2 biossetup forbiosconfigurations 24
- Mbios_led themainbiosisactive 24
- Note do not use the clear cmos button when the system is on or the system may shutdown 24
- Pw_sw power button rst_sw reset button cmos_sw clear cmos button 24
- Quick buttons 24
- Single bios 24
- The cmos values 24
- Thebiosswitch bios_sw allowsuserstoeasilyselectadifferentbiosforbootuporoverclocking helpingto reduce bios failure during overclocking the sb switch allows enabling or disabling of the dual bios function theledindicator mbios_led bbios_led showswhichbiosisactive 24
- This motherboard has four quick buttons power reset clear cmos and direct to bios the power button and reset button allow users to quickly turn on off or reset the computer in an open case environment when they want to change hardware components or conduct hardware testing use this button to clear the bios configurationandresetthecmosvaluestofactorydefaultswhenneeded thedirecttobiosbuttonhelps usersmoreeasilytodirectlyenterthebiosatanytimebeforerebootingthesystem pressingthisbuttonduring the post process allows you to immediately enter bios setup enter bios setup directly on next boot if the buttonispressedafterthepostprocess 24
- 2 x default 25
- 25 hardware installation 25
- Audio gain control switches 25
- B s_ b 25
- Ddrvtt_a pin 1 25
- Ddrvtt_b pin 1 25
- Dimm_a pin 1 25
- Dimm_b pin 1 25
- F_usb3 f 25
- F_usb30 f_ u 25
- Pchv pin 1 25
- Pin no definition 25
- S 3 b s s s u 25
- S b_ b 25
- Steps connecttheredleadofthemultimetertothepin1 power ofavoltage measurementpointandtheblackleadtothepin2 ground 25
- The switch allows for audio gain control for the headphone speaker out jack on the back panel please set it accordingtoyourheadphonespecification actualeffectsmayvarybythedevicebeingused 25
- Use a multimeter to measure the following motherboard voltages you can employ following way to measure component voltages 25
- Voltage measurement points 25
- Vpp25_a pin 1 25
- Vpp25_b pin 1 25
- Vrin pin 1 25
- _ s s_ _ b 25
- _ u _ b 25
- 10 changing the operational amplifier 26
- 10 changingtheoperationalamplifier 26
- 11 internal connectors 27
- 2 atx_12v_2x4 atx 2x4 12v power connector and 2x12 main power connector 28
- Hardware installation 28 28
- The 12v power connector mainly supplies power to the cpu if the 12v power connector is not connected the 12v power connector mainly supplies power to the cpu if the 12v power connector is not connected the computer will not start 28
- To meet expansion requirements it is recommended that a power supply that can withstand high powerconsumptionbeused 500worgreater ifapowersupplyisusedthatdoesnotprovidethe required power the result can lead to an unstable or unbootable system 28
- When you overclock the cpu make sure to connect one end of the included 1 to 3 power cable to the atx_12v_2x4 power connector and the other three to the power supply to ensure the system is provided with enough power 28
- With the use of the power connector the power supply can supply enough stable power to all the components onthemotherboard beforeconnectingthepowerconnector firstmakesurethepowersupplyisturned off and all devices are properly installed the power connector possesses a foolproof design connect the power supply cable to the power connector in the correct orientation 28
- 29 hardware installation 29
- 5 cpu_fan sys_fan1 2 3 fan headers 29
- All fan headers on this motherboard are 4 pin most fan headers possess a foolproof insertion design whenconnectingafancable besuretoconnectitinthecorrectorientation theblackconnectorwireis thegroundwire thespeedcontrolfunctionrequirestheuseofafanwithfanspeedcontroldesign for optimum heat dissipation it is recommended that a system fan be installed inside the chassis 29
- Atx4p pcie power connector 29
- Be sure to connect fan cables to the fan headers to prevent your cpu and system from overheat 29
- Ing overheating may result in damage to the cpu or the system may hang 29
- Pin no definition 29
- Speed control 29
- The power connector provide auxiliary power to the onboard pci express x16 slots when two or more graphicscardsareinstalled werecommendthatyouconnectthesatapowercable s fromthepower supply to the atx4p connector to ensure system stability 29
- Thesefanheadersarenotconfigurationjumperblocks donotplaceajumpercapontheheaders 29
- Cpu_opt water cooling cpu fan header 30
- Hardware installation 30 30
- Led_con1 i o shield audio led power connector 30
- The fan header is 4 pin and possesses a foolproof insertion design when connecting a fan cable be sure toconnectitinthecorrectorientation theblackconnectorwireisthegroundwire thespeedcontrol function requires the use of a fan with fan speed control design 30
- The power connector provides power to the leds on the i o shield on the motherboard back panel 30
- 31 hardware installation 31
- Led_con2 heatsink led power connector 31
- M2_10g sata express and sata3 4 5 connectors can only be used one at a time the sata3 4 5 connectors will become unavailable when an m ssd is installed 31
- Pin no definition 31
- Sata_express sata express connector 31
- The power connector provides power to the leds on the chipset heatsink 31
- The sata express connector supports a single sata express device 31
- Chipset supports raid 0 raid 1 raid5 andraid10 refertochapter3 configuringsataharddrive s forinstructionsonconfiguringa raid array 32
- Hardware installation 32 32
- Pin no definition 32
- Sata3 0 1 2 3 4 5 sata 6gb s connectors 32
- Ssata3 0 1 2 3 sata 6gb s connectors 32
- The sata connectors conform to sata 6gb s standard and are compatible with sata 3gb s and sata 1 gb s standard each sata connector supports a single sata device the inte 32
- The sata connectors conform to sata 6gb s standard and are compatible with sata 3gb s and sata 1 gb s standards only ahci and ide modes are supported each sata connector supports a single sata device 32
- To enable hot plugging for the sata ports refer to chapter 2 bios setup chipset pch sata configuration formoreinformation 32
- To enable hot plugging for the sata ports refer to chapter 2 bios setup chipset pch ssata configuration formoreinformation 32
- 33 hardware installation 33
- Connectors will become unavailable when an m ssd is installed 33
- Follow the steps below to correctly install an m ssd in the m2_10g connector 33
- For the m ssd to be installed and refasten the screw and nut 33
- M2_10g m socket 3 connector 33
- M2_10g sata express and sata3 4 5 connectors can only be used one at a time the sata3 4 5 33
- On the motherboard there are two length adjustment holes for the m ssd select the proper hole 33
- Step 1 use a screw driver to unfasten the screw and nut from the motherboard locate the proper mount ing hole for the m ssd to be installed and then screwthenutfirst 33
- Step 2 slide the m ssd into the connector at an oblique angle 33
- Step 3 press the m ssd down and then secure it with the screw 33
- Step 4 the installation is completed as shown in the picture above 33
- You can insert an m ssd into this connector 33
- F_panel front panel header 34
- 35 hardware installation 35
- F_audio front panel audio header 35
- F_usb30_1 f_usb30_2 usb 3 2 headers 35
- Prior to installing the usb front panel be sure to turn off your computer and unplug the power cord from the power outlet to prevent damage to the usb front panel 35
- Some chassis provide a front panel audio module that has separated connectors on each wire instead of a single plug for information about connecting the front panel audio module that has different wire assignments please contact the chassis manufacturer 35
- Thefrontpanelaudioheadersupportsintelhighdefinitionaudio hd andac 97audio youmayconnect your chassis front panel audio module to this header make sure the wire assignments of the module con nector match the pin assignments of the motherboard header incorrect connection between the module connector and the motherboard header will make the device unable to work or even damage it 35
- Theheadersconformtousb3 2 specificationandeachheadercanprovidetwousbports forpur chasing the optional 3 front panel that provides two usb 3 2 ports please contact the local dealer 35
- Add in card 36
- Donotplugtheieee1394bracket 2x5 pin cableintotheusb2 1 header prior to installing the usb bracket be sure to turn off your computer and unplug the power cord 36
- F_usb1 f_usb2 usb 2 1 headers 36
- From the power outlet to prevent damage to the usb bracket 36
- Hardware installation 36 36
- N_ s4_s5 36
- N_ slp_s3 36
- No pin 36
- Pin no definition 36
- Power 5v 36
- Supports a thunderbol 36
- Thb_c thunderbolt add in card connector 36
- Theheadersconformtousb2 1 specification eachusbheadercanprovidetwousbportsviaan optional usb bracket for purchasing the optional usb bracket please contact the local dealer 36
- This connector is for a gigabyte thunderbolt add in card 36
- Usb dx 36
- Usb dy 36
- Bat battery 37
- Clr_cmos clear cmos jumper 37
- Chapter 2 bios setup 39
- 1 startup screen 40
- 2 the main menu 41
- A startup guide default 41
- B st mode smart tweak mode 41
- C classic setup 42
- Classic setup function keys 42
- Sample bios version f1c 42
- 3 m i t 44
- Advanced frequency settings 45
- Cpu base clock 45
- Cpu clock ratio 45
- Cpu upgrad 45
- Host clock value 45
- Host pcie clock frequency 45
- M i t current status 45
- Processor base clock gear ratio 45
- Spread spectrum control 45
- Advanced cpu core settings 46
- Cpu clock ratio cpu frequency 46
- Cpu frequency 46
- Cpu pll selection 46
- Filter pll level 46
- Intel r turbo boost technology 46
- Turbo power limit watts 46
- Turbo rati 46
- Uncore frequency 46
- Uncore ratio 46
- C3 state support 47
- C6 c7 state support 47
- Core current limit amps 47
- Cpu eist function 47
- Cpu enhanced halt c1e 47
- Cpu thermal monitor 47
- Extremememoryprofile x m p 47
- Hyper threading technology 47
- No of cpu cores enabled 47
- Advanced memory settings 48
- Extremememoryprofile x m p 48
- Memory boot mode 48
- Memory enhancement settings 48
- Memory frequency mhz 48
- Memory timing mode 48
- System memory multiplier 48
- System memory multiplier memory frequency mhz 48
- Channel interleaving 49
- Profileddrvoltage 49
- Rank interleaving 49
- Advanced power settings 50
- Advanced voltage settings 50
- Cpu vrin loadline calibration 50
- Cpu vrin protection 50
- Cpu vrin current protection 51
- Cpu vrin pwm switch rate 51
- Cpu vrin pwm thermal protection 51
- Ddr ch a b current protection 51
- Ddr ch a b pwm switch rate 51
- Ddr ch a b voltage protection 51
- Ddr ch c d current protection 51
- Ddr ch c d pwm switch rate 51
- Ddr ch c d voltage protection 51
- Pwm phase control 51
- S3 save mode 51
- 1st system temperature 2nd system temperature 53
- Case open 53
- Cpu cpu opt system fan fail warning 53
- Cpu cpu opt system fan speed 53
- Cpu fan speed control cpu_fan connector 53
- Cpu opt fan speed control cpu_opt connector 53
- Cpu pch temperature 53
- Cpu system pch temperature warning 53
- Cpu vcore cpu vrin cpu vccio dram channel a b voltage dram channel c d 53
- Fan speed percentage 53
- Reset case open status 53
- Voltage ddrvpp channel a b voltage ddrvpp channel c d voltage 5v pch io pch core 12v 53
- 1st system fan speed control sys_fan1 connector 54
- 2nd system fan speed control sys_fan2 connector 54
- 3rd system fan speed control sys_fan3 connector 54
- Fan speed percentage 54
- 3dmark01 enhancement 55
- Miscellaneous settings 55
- Pcieslotconfiguration 55
- 4 system information 56
- Access level 56
- System date 56
- System language 56
- System time 56
- 5 bios features 57
- Boot option priorities 57
- Bootup numlock state 57
- Fast boot 57
- Full screen logo show 57
- Hard drive cd dvd rom drive floppy drive network device bbs priorities 57
- Security option 57
- Csm support 58
- Lan pxe boot option rom 58
- Network stack driver support 58
- Next boot after ac power loss 58
- Ps2 devices support 58
- Sata support 58
- Usb support 58
- Vga support 58
- Windows 8 features 58
- Administrator password 59
- Ipv4 pxe support 59
- Ipv6 pxe support 59
- Network stack 59
- Other pci device rom priority 59
- Storage boot option control 59
- User password 59
- 6 peripherals 60
- Atheros killer e2201 lan chip lan1 60
- Audio led 60
- Initial display output 60
- Legacy usb support 60
- Onboard lan controller qualcom 60
- Rear panel led 60
- Xhci hand off 60
- Ehci hand off 61
- Intel r ethernet network connection lan2 61
- Two layer kvm switch 61
- Usb storage devices 61
- 7 chipset 62
- Configuressataas 62
- Pchssataconfiguration ssata30 3connectors 62
- Ssata controller 62
- Configuresataas 63
- Hot plug 63
- Pchsataconfiguration sata30 5connectors 63
- Sata controller 63
- Sata mode options 63
- Sata port 0 1 2 3 4 5 63
- Ssata device type 63
- Ssata port 0 1 2 3 63
- Audio controller 64
- Execute disable bi 64
- Gbe lan chip lan2 64
- Intel vt for directed i o vt d 64
- Pch dmi aspm 64
- Pch internal lan inte 64
- Sata device type 64
- Wake on lan 64
- Xhci mode 64
- 8 power management 65
- Ac back 65
- Power on by keyboard 65
- Power on by mouse 65
- Power on password 65
- Power loading 66
- Resume by alarm 66
- Soft off by pwr bttn 66
- Usb dac power 66
- 9 save exit 67
- Boot override 67
- Exit without saving 67
- Load optimized defaults 67
- Loadprofiles 67
- Save exit setup 67
- Saveprofiles 67
- 1 configuring sata controllers 69
- 1 configuringsatacontrollers 69
- A installing sata hard drive s in your computer 69
- Before you begin please prepare the following items 69
- Chapter 3 configuring sata hard drive s 69
- Chapter3 configuringsataharddrive s 69
- Raid levels 69
- Toconfiguresataharddrive s followthestepsbelow 69
- B configuringsatacontrollermodeinbiossetup 70
- C 1 uefiraidconfiguration 71
- 75 configuring sata hard drive s 75
- C 2 configuringlegacyraidrom 75
- Enter the inte 75
- Figure 10 75
- Figure 9 75
- Legacyraidbiossetuputilitytoconfigurearaidarray skipthisstepandproceedwiththe installationofwindowsoperatingsystemforanon raidconfiguration 75
- The main menu screenwillappear figure10 75
- Toentertheraidconfigurationutility 75
- Configuring sata hard drive s 76 76
- Figure 11 76
- Figure 12 76
- Toproceed 76
- 77 configuring sata hard drive s 77
- Figure 13 77
- Figure 14 77
- Now you can proceed to install the sata raid ahci driver and operating system 77
- Or select 6 exit in main menu 77
- To cancel figure13 77
- When completed you can see detailed information about the raid array in the disk volume information section includingtheraidlevel stripeblocksize arrayname andarraycapacity etc figure14 77
- Before you begin 78
- Configuring sata hard drive s 78 78
- Figure 15 78
- Figure 16 78
- Figure15 78
- Figure16 78
- Rapid recover technology provides data protection by allowing users to easily restore data and system operation using a designated recovery drive with the rapid recovery technology which employs raid 1 functionality users can copy the data from the master drive to the recovery drive if needed the data on the recovery drive can be restored back to the master drive 78
- Recovery volume options inte 78
- The recovery drive must have equal or greater capacity than the master drive a recovery volume can be created with two hard drives only a recovery volume and a raid array cannot co exist in the system at the same time that is if you have already created a recovery volume you are unable to create a raid array by default only the master drive can be viewed in the operating system the recovery drive is hidden 78
- 79 configuring sata hard drive s 79
- Figure 17 79
- Figure 18 79
- On the create volume item to begin creating the recovery volume and follow the on screen instructions to complete 79
- Rapid storage technology utility in the operating system on request also allows users to restore the master drive to a previous state 79
- Step 4 under sync select continuous or on request figure18 whensetto continuous changes made to the data on the master drive will be automatically and continuously copied to the recovery drive when both hard drives are installed in the system on request allows users to update data from the master drive to the recovery drive manually using the inte 79
- Toconfirm figure17 79
- Acceleration options thisoptionallowsyoutoviewthestatusofyouraccelerateddrive volume figure20 createdusingtheinte 80
- Configuring sata hard drive s 80 80
- Figure 19 80
- Figure 20 80
- Irst utility in case you are unable to run the inte 80
- Toabort 80
- Toconfirm 80
- 2 installing the sata raid ahci driver and operating system 81
- A installing windows 81
- B rebuilding an array 82
- Configuring sata hard drive s 82 82
- Rebuilding is the process of restoring data to a hard drive from other drives in the array rebuilding applies only to fault tolerant arrays such as raid 1 raid 5 or raid 10 arrays the procedures below assume a new drive isaddedtoreplaceafaileddrivetorebuildaraid1array note thenewdrivemusthaveequalorgreater capacitythantheoldone 82
- The following screen appears indicating that an automatic rebuild will be performed after you enter the operating system if you do not enable automaticrebuildonthisstage youhavetomanuallyrebuildthearrayintheoperatingsystem seethenext pageformoredetails 82
- Toentertheraid configurationutility thefollowingscreenappearsafteryouentertheraidconfigurationutility 82
- Turn off your computer and replace the failed hard drive with a new one restart your computer 82
- Configuring sata hard drive s 84 84
- Raidconfigurationutility onthe recovery volumes options menu select enable only recovery disk to show the recovery drive in theoperatingsystem followtheon screeninstructionstocompleteandexittheraidconfigurationutility 84
- Rapid storage technology utility and click recover data in manage volume 84
- Restoring the master drive to a previous state for recovery volume only when two hard drives are set to recovery volume in update on request mode you can restore the master drive data to the last backup state when needed for example in case the master drive detects a virus you can restore the recovery drive data to the master drive 84
- Step 1 select 4 recovery volume options in the main menu of the inte 84
- Step 2 go to the manage menu of the inte 84
- Step 3 click yes to begin the data recovery 84
- Step 4 after the recovery volume is completed the status will display as normal 84
- The status item on the left of the screen displays the rebuild progress 84
- 1 chipset drivers 85
- Chapter 4 drivers installation 85
- 2 application software 86
- 3 information 86
- 1 1 updating the bios with the q flash utility 87
- 1 bios update utilities 87
- A before you begin 87
- Chapter 5 unique features 87
- B updating the bios 88
- 1 2 updating the bios with the bios utility 90
- A before you begin 90
- B using bios 90
- C after updating the bios 90
- 1 3 using q flash plus 91
- A before you begin 91
- B using q flash plus 91
- 2 app center 92
- Running the app center 92
- 2 1 easytune 93
- Tabs information 93
- The easytune interface 93
- 2 2 system information viewer 94
- Tabs information 94
- The system information viewer interface 94
- 2 3 ez setup 95
- Disk mode switch 95
- A system requirements 96
- B using ez smart response 96
- Ez smart response 96
- A system requirements 97
- B using xhd 97
- 2 4 fast boot 98
- The fast boot interface 98
- Using fast boot 98
- 2 5 smart timelock 99
- The smart timelock interface 99
- Using smart timelock 99
- 2 6 smart recovery 2 100
- Creating a backup 100
- Recoveringafile 100
- Saving the backup to a network location 100
- Recovering your system with smart recovery 2 101
- 2 7 usb blocker 102
- The usb blocker interface 102
- Using usb blocker 102
- 2 8 ambient led 103
- The ambient led interface 103
- Using ambient led 103
- 2 9 v tuner 104
- The v tuner interface 104
- Using v tuner 104
- 2 10 smart switch 105
- The smart switch interface 105
- Using smart switch 105
- 2 11 cloud station server 106
- Before you begin 106
- Homecloud 106
- The homecloud interface 106
- Using homecloud 106
- Gigabyte remote 108
- The gigabyte remote interface 108
- Using gigabyte remote 108
- Remote oc 109
- The remote oc interface 109
- Using remote oc 109
- Autogreen 110
- The autogreen interface 110
- Hotspot 111
- The hotspot interface 111
- Using hotspot 111
- 2 12 game controller 112
- The game controller interface 112
- Using game controller 112
- 1 qualcom 113
- 1 qualcomm atheros killer network manager 113
- Applications page 113
- Atheros killer network manager 113
- Chapter 6 appendix 113
- Killer ethernet 113
- Network settings 113
- System performance 113
- 2 1 configuring 2 5 channel audio 114
- 2 1 configuring2 5 channelaudio 114
- 2 2 creative software suite 114
- 2 configuring audio input and output 114
- 2 configuringaudioinputandoutput 114
- Creative alchemy 114
- Sound blaster recon3di 115
- 2 3 configuring s pdif out 118
- 2 3 configurings pdifout 118
- 2 4 configuring audio recording 119
- 2 4 configuringaudiorecording 119
- 2 5 using the sound recorder 121
- A recording sound 121
- B playing the recorded sound 121
- 3 1 frequently asked questions 122
- 3 troubleshooting 122
- Appendix 122 122
- To read more faqs for your motherboard please go to the support downloads faq page on gigabyte s website 122
- 123 appendix 123
- 3 2 troubleshooting procedure 123
- If you encounter any troubles during system startup follow the troubleshooting procedure below to solve the problem 123
- Appendix 124 124
- If the procedure above is unable to solve your problem contact the place of purchase or local dealer for help or go to the support downloads technical support page to submit your question our customer service staff will reply you as soon as possible 124
- 4 debug led codes 125
- Regular boot 125
- Recovery 127
- S3 resume 127
- Our commitment to preserving the environment 129
- Regulatory notices 129
- Regulatory statements 129
- Restriction of hazardous substances rohs directive statement 129
- Waste electrical electronic equipment weee directive statement 129
- Weee symbol statement 129
- Canada industry canada ic 130
- Fcc notice u s a only 130
- European community directive r tte directive compliance statement 131
- Appendix 132 132
- Japan wireless statement 132
- Korea kcc ncc wireless statement 132
- Taiwan ncc wireless statements 無線設備警告聲明 132
- 135 appendix 135
- Contact us 135
- Appendix 136 136
- Gigabyte esupport 136
- Tosubmitatechnicalornon technical sales marketing question pleaselinkto http esupport gigabyte com 136
Похожие устройства
- Gigabyte GA-X99-Gaming G1 WIFI Руководство пользователя
- Gigabyte GA-X99-Phoenix SLI Руководство пользователя
- Gigabyte GA-X99-SLI Руководство пользователя
- Gigabyte GA-X99-SOC Champion Руководство пользователя
- Gigabyte GA-X99-SOC Force Руководство пользователя
- Gigabyte GA-X99-UD3P Руководство пользователя
- Gigabyte GA-X99-UD4P Руководство пользователя
- Gigabyte GA-X99-UD7 WIFI Руководство пользователя
- Gigabyte GA-X99M-Gaming 5 Руководство пользователя
- Gigabyte G1.Sniper Z6 Руководство пользователя
- Gigabyte G1.Sniper Z97 Руководство пользователя
- Gigabyte GA-Z97-HD3P Руководство пользователя
- Gigabyte GA-Z97M-D3H Руководство пользователя
- Gigabyte GA-Z97MX-Gaming 5 Руководство пользователя
- Gigabyte GA-Z97N-Gaming 5 Руководство пользователя
- Gigabyte GA-Z97X-Game Plus Руководство пользователя
- Gigabyte GA-Z97X-Gaming 5 Руководство пользователя
- Gigabyte GA-Z97X-Gaming GT Руководство пользователя
- Gigabyte GA-Z97X-SLI Руководство пользователя
- Gigabyte GA-Z97X-SOC Force Руководство пользователя