Nilfisk sv 8000 45000002 [10/16] During use

English

11. The handle controls are now active.

• The red trigger on the hose handle will release steam when pressed.

• The red button on the side of the handle will lock the steam trigger in the off

position.

• Pressing the left hand switch on top of the handle will activate the vacuum.

• Pressing the right hand momentary switch located on the top of the handle is

inactive as there is no detergent facility on this machine.

13. Choose and fit the required accessory (Diagram C) to the hose handle. Lock the

accessory in place by turning the accessory locking clip.

!! When changing accessories during use please note these will be hot.

During Use

………………………………………………...

Operating Procedure cont….

………………………………………………...

Cold Water Tank Empty(Number 7 Diagram A)

1. Refill the cold water tank when the refill cold water LED (Number 13 Diagram B) is

illuminated. A buzzer will sound and the steam will no longer come out of the nozzle

when the steam switch on the handle is pressed.

2. Always empty the collection tank each time the cold-water tank is refilled.

3. The pumps will not work when the cold-water tank is empty.

4. Once the cold water refill LED is illuminated the boiler heater will remain on for 30

minutes. If the cold-water tank is not refilled within 30 minutes and the machine is left

powered on the boiler heater will switch off.

Collection Tank Full (Number 1 Diagram A)

1. Always empty the collection tank each time the cold-water tank is refilled

2. The pitch of the motor noise changes and there is no suction at the nozzle

3. Switch off the machine, empty the collection tank and rinse clean