Nilfisk sv 8000 45000002 [14/16] Trouble shooting
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Nilfisk sv 8000 45000002 [14/16] Trouble shooting

Nilfisk sv 8000 45000002 [14/16] Trouble shooting
English
14
Symptom Possible cause Action
No power Not connected / Faulty socket Check connection to wall socket and
socket switch. Try in another wall
socket
On / Off switch not on Press On / Off switch which will
illuminate when on
Fuse blown Replace fuse with approved 13A fuse
Unknown Call for service
No steam Steam Control turned down fully
clockwise
Turn the control to half way
Steamer not ready Wait for the “Ready to steam” light to
illuminate
Clean water tank is low (beeping
sound& "refill" light is lit)
Pour water into the clean water tank
until the beeper stops. The steam
handle will work again.
Unknown Call for service
No steam, Just water Steamer not ready Wait for the "Ready to steam " light
to illuminate
Boiler at pressure and not heating
(temperature less than 110ºC)
Hold the steam switch on for
approximately one minute, ever if just
water is coming out. This will result
in the heater coming back on
Unknown Call for service
Steam Leaking from
front socket
“O” Rings split Change and re grease “O” Rings. To
avoid this happening ensure “o” rings
are grease before every use.
“O” rings worn Change and re grease “O” Rings. To
avoid this happening ensure “o” rings
are grease before every use.
Vacuum power low Vacuum operation has been
selected on the machine
Operate any of the handle controls,
which will reset the motor power to
full. Continue vacuuming
High pitch motor noise
Switch the machine off and empty the
collection tank. Refill the collection
tank with clean water to the mark and
recommence work.
Unknown Call for service
Trouble Shooting

Содержание

Похожие устройства

Скачать