Nilfisk sv 8000 45000002 [8/16] Installation

English

Installation

•

Lift the machine out of the box.

• Carefully place the machine on its side in

order to assemble the wheels securely.

!! A flat surface is required which will

not scratch or damage the surfaces of the

machine.

• Diagram D – Casters with No Brake x 2. Remove bolts from the machine and

position into place towards back of the machine. Tighten securely ensuring no

movement on the brackets.

• Diagram D – Casters with Brake x 2. Remove bolts from the machine and position

into place towards front of the machine. Tighten securely ensuring no movement on

the brackets.

• Once all the wheels are fully assembled, resume the machine to its upright position.

• Place Tubular Handle (Diagram D) in position on the back of the machine and secure

using the 4 x Plastic Wing Nuts (Diagram D).

!! Do not screw them all the way in at this point.

• Place Wire Basket (Diagram D) over the Wing Nuts and tighten up to secure.

• Check all accessories are present in the box as shown in Diagram C & D.

• This is an electrical product – Do not use in wet weather or allow the machine to get wet.

• Do not discharge steam towards people, danger of scolding. Or towards equipment containing

electrical components

• Never allow children to play with this appliance.

• Do not use the machine for other purposes that it was built for.

• Please remember that the steam cleaner operates at temperatures in excess of 150°C. Never

use it on objects, which cannot resist the temperature (delicate materials, fabrics, plastics,

wood etc). Where any doubt exists check carefully on a part of the material where minor

marks will not matter.

• Do not operate the machine or carry out any maintenance out on it

 Unless you are trained and authorised to do so

 Unless you have read and thoroughly understand this instruction manual.

Warnings

………………………………………………...

This machine has been designed with your safety in mind; however it is important that you

observe the following points for safe operation during the operating procedure