Kemppi KMS 400 MVU [8/16] Fastmig kms 400 mvu kemppi oy 1042
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Kemppi KMS 400 MVU [8/16] Fastmig kms 400 mvu kemppi oy 1042

Kemppi KMS 400 MVU [8/16] Fastmig kms 400 mvu kemppi oy 1042
EN
Make sure that faulty and damaged welding torches are changed immediately as they •
may cause electrocution or re.
Remember that the cable, plugs and other electric devices may be installed or replaced •
only by an electrical contractor or engineer authorized to perform such operations.
Turn o the welding machine when it is not in use.•
Welding power circuit
Insulate yourself from the welding circuit by using dry and undamaged protective •
clothing.
Never touch the work piece and welding rod, welding wire, welding electrode or contact •
tip at the same time.
Do not put the welding torch or ground cable on the welding machine or other electric •
equipment.
Welding fumes
Ensure proper ventilation and avoid inhaling the fumes.•
Ensure a sucient supply of fresh air, particularly in closed spaces. You can also ensure •
an adequate supply of clean breathing air by using a ltered fresh-air mask.
Take extra precautions when working on metals or surface-treated materials containing, •
for example, lead, cadmium, zinc, mercury or beryllium.
Transportation, lifting and suspension
Pay attention to correct working position when lifting a heavy device – risk of injury to •
the back.
Never pull or lift the machine by the welding torch or other cables. Always use the lifting •
points or handles designed for that purpose.
Only use a transport unit designed for the equipment. Try to transport the machine in an •
upright position, if possible.
Never lift a gas cylinder and the welding machine at the same time. There are separate •
provisions for gas cylinder transportation.
Never use a welding machine when suspended unless the suspension device has been •
designed and approved for that particular purpose.
Do not exceed the maximum allowable load of suspension beams or the transportation •
trolley of welding equipment. It is recommended that the wire coil be removed during
lifting or transportation.
Environment
Welding equipment is not recommended for use in rain or snow – see manual. Protect •
the equipment against rain and strong sunlight. Always store the machine in a dry and
clean space.
Protect the machine from sand and dust during use and in storage. The recommended •
operating temperature range is -20 to +40 °C. The machine’s operation eciency
decreases and it becomes more prone to damage if used in temperatures in excess of
40 °C.
Place the machine so that it is not exposed to hot surfaces, sparks or spatter. •
Make sure the airow to and from the machine is unrestricted.•
Always use the machine in an upright position only.•
EMC classication of this product is class A in accordance with electromagnetic •
compatibility standards CISPR 11 and IEC 60974-10, and therefore the product is
designed to be used in an industrial environment only.
WARNING: This class A equipment is not intended for use in residential locations where
the electrical power is provided by a public low-voltage supply system. In those locations
it may be dicult to ensure the electromagnetic compatibility due to conducted and
radiated disturbances.
Arc welding equipments cause electromagnetic disturbance. To minimize the harmful •
eects, strictly use the equipment according to the operating manual and other
recommendations.
6
FastMig KMS 400 MVU / © Kemppi Oy / 1042

Содержание

Похожие устройства

Скачать