Timberk tec.e15 m 1500 [7/28] Important
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Timberk tec.e15 m 1500 [7/28] Important

Timberk tec.e15 m 1500 [7/28] Important
www.timberk.com • electric convector heater
7
Fig. 7
For models:
TEC.E15 DG 1000
TEC.E15 DG 1500
TEC.E15 DG 2000
TEC.E15 GL 1000
TEC.E15 GL 1500
TEC.E15 GL 2000
IMPORTANT!
In order to increase the operational life of the convector
is recommended to note the order unit is switched off.
Shutting down the output without pre-cooling of the
heating elements can cause overheating and premature
failure.
clockwise to turn off the meter. Now the thermostat will maintain the set
temperature, periodically enabling and disabling convector.
4. Shutdown
4.1 Set the mode switch «OFF» and disconnect the appliance from the
mains.
1. Button «POWER»
Press the button «POWER», when the appliance is not working, it starts
working by default in Low power.
2. Button «NORMAL»
Press the button «NORMAL», when the appliance is working, it starts
working in middle power.
3. Button «X-HEAT»
Press the button «X-HEAT», when the appliance is working, it starts
working in high power.
4. Button «ECO»
Press the button «ECO», when the appliance is working, it starts working
in low power.
5. Button «AF»
Press the «AF» button, the light is working, the appliance would be in anti-
freeze mode. Press the button «AF» again, the appliance would be out of
Anti-freeze mode.
6. Button «MUTE»
Press the «mute», the warning tone is off. Press the button «mute» again,
the warning tone is on.
7. Button «X-SMART»
Press the button «X-SMART», the appliance would be on smart mode:
• When the setting temperature is higher than current temperature of 5
degrees, it starts working in high power.
• When the setting temperature is higher than current temperature 3
degrees or the setting temperature is lower than current temperature 5
degrees, it starts working in middle power.
• When the setting temperature is lower than current temperature 3
degrees, it starts working in low power.
8. Button «LIGHT»
Press the button «LIGHT», the appliance would be on night mode. The light
display, display screen will turn off.
Press the button «LIGHT» again, the appliance would be out of night mode.
9. Button «UP» and «DOWN»
• Press the button «UP» or «DOWN», it would increase or decrease the
temperature settings (default settings are 25 degrees).
• When set a temperature or timer, if no any setting action in 3 seconds,
the timer would be confirmed.
24
14 15 16 17 18 19
1
9
13
6
7
8
3 5 10 11

Содержание

Похожие устройства

Скачать