Infinity VG20 [11/12] 頁面 11

BATTERIES: Remove the battery cover at the rear of the computer and install two pieces

of R6P * SUM3 * SIZE"AA" * 1.5V Batteries. Insure the Batteries are correctly positioned

and the battery springs are in proper contact with Batteries. Replace the battery cover and

insure it is tightly closed.

If the LCD Display is illegible or only partial segments are displayed then reboot

the computer. Disconnect the power for approximately 15 seconds by removing

the Batteries, wait 15 seconds, then reinstall them.

To prevent damaging the computer we suggest that you replace the Batteries at

least every six months. DO NOT mix old and new Batteries. Do NOT mix

2) When the exercise machine is in use.

AUTO POWER OFF: The computer will automatically turn OFF and only display the

CLOCK on the LCD when the exercise machine is NOT in use for approximately 6

minutes.

LOW BATTERIES: Replace the Batteries if the Keys DO NOT respond correctly, the LCD

Display is illegible or only partial segments are displayed.

Key Functions: There are 4 Keys on the computer. Each Key indicates its function.

Press the Key in the center or where indicated with moderate pressure. DO NOT hit the

Keys.

MODE Key: Confirm your selection (before your workout) for TIME-DISTANCE-

Score Condition Heart Rate Per Minute

F1 Excellent 75-80

F2 Good 85-90

F3 Average 95-115

F4 Fair 120-125

F5 Poor 130-135

F6 Very Poor 135+

RESET Keys: Press the RESET Key for 4 seconds this will reset all functions.

SET Keys: Enter preset values for TIME-DISTANCE-CALORIES/PULSE

of 22.6km/h (14mph) at an RPM of 60.

NOTE:

1.2 x AA batteries are used for this computer. SUM3 SIZE AA (1.5V)

2.Keep moisture away from computer

3 . During RECOVERY no other displays will operate.

POWER ON DISPLAY

TEMPERATURE : 0 (0~60 C); F(32~99 F)

CALENDAR : 1900/1/1~2006/1/1~2099/12/31

CLOCK : 24 HOURS/ 0:00~23.59

FUNCTIONS

Hand Pulse Sensors

Both PALMS of your hands should be in contact with both Hand Pulse Sensors.

The Hand Pulse Sensors should be held firmly. Jiggling or moving your hands will cause

incorrect Pulse signals.

Slightly moist hands are desirable, Dry hands can cause incorrect Pulse signals.

° ° ° °

COMPUTER INSTRUCTIONS

Power Functions