Texas Smart Spreader 200 [12/25] Controls and features identification

Your spreader needs to be pushed at three miles per hour, which is a brisk walking speed. Slower

or faster speeds will change the spread coverage. Wet spreading material will also change the

flow rate. Clean your spreader thoroughly after each use. Wash between the moving parts at

bottom of the hopper.

Technical specifications on the drop spreader are provided in the “Specifications” section of this

manual.

Controls and Features Identification

Read this owner’s manual before operating the equipment. Familiarize yourself with the location

and function of the controls and features. Save this manual for future reference.

1) Flow Control Handle– Controls the flow of

material being spread.

2) U-Handle – Maneuvers the drop spreader.

3) Hopper – Do not exceed rated load capacity

60lb.

4) Pneumatic Wheels – 10” pneumatic with

poly rim.

CAUTION

Read and follow all instructions for assembly and operation. Failure to properly assemble this

equipment could result in serious injury to the user or bystanders, or cause equipment damage

Assembly Instructions

DROP SPREADER COMPONENT PARTS AND ASSEMBLY

Take all parts out of the shipping crate and inspect components to ensure there are no missing

pieces before starting to assemble the drop spreader follow steps 1 through 3.

TOOLS REQUIRED

3. 10 mm Wrench

4. Pliers