Texas Smart Spreader 200 [15/25] Caution

ADJUSTING FLOW CONTROL

1. For proper material flow settings refer to the spreading instructions section.

2. Move the bolt on flow control assembly to the proper setting and tighten.

3. Pushing the spreader forward at a brisk walking speed to ensure consistent coverage of

material.

4. To stop or turning, move the flow control handle to the closed position before stopping or

turning.

CONSISTENT COVERAGE

To insure consistent coverage, make sure each drop pattern slightly overlaps the previous pattern

as shown in the figure.

WARNING

Do not over apply material. Follow the recommended coverage rate for each product. Over

application will lead to damage and contamination. If spreading material accidentally hits or

deposits to heavily, soak the area thoroughly with a garden hose or sprinkler to prevent burning.

CAUTION

The spreader settings are guidelines only. The spreader should be calibrated prior to application to

ensure accuracy.

The spreader settings are based on a walking speed of 3 MPH. Walking faster or slower will alter

the spread application rate. Exact rates depend upon the spreader itself and the accuracy of the

person operating it.