YLI YK-168 [2/4] Procedures of programming

www.yli.cn

We create security

Alarm status

Continuous flash

During programming

Light

Continuous

Flash

Programming confirmation

(PRESS KEY #)

Light Light 2 Beeps

Continuous beeps

Alarm statusContinuous flashContinuous beeps

Notice to user: (1)Successful entry, it will keep 10 seconds, if no further key entry in 10 seconds, It will

return to normal operation status(Standby mode).

(2)In case wrong entry, cancel the wrong entry by pressing key #, or waiting for 10 seconds then re-enter.

PROGRAMMING

Before use of the new control station, programming every item to confirm the functions and settings meet

the requirement of the users

Programming code = Management code = Master code

Default programming code is 1234

NOTE: (1) Successful programming operation The amber LED will show 2 flashes and the buzzer will

sound 2 beeps.

Unsuccessful programming operation The amber LED will show 5 flash and buzzer will sound 5 beeps.

(2)The User Number / User ID Card / User Code, are not allowed to record repeatly.Repeat record will not

be entered and will give warning signal : amber LED 5 flash, buzzer sound 5 beeps to signify rejection. It is

required to delete the old data the re-enter.

PROCEDURES OF PROGRAMMING

(1)Entry into programming

PRESS KEY Enter the programming code (4-8 digits, default code is 1234) # (The amber LED

and green LED lighted, signifying entry into the programming mode)

(2)Recording the new programming code

(For security purpose, change the new programming code from default code before use of the new control

station).

PRESS KEY 0 Enter the new programming code (4-8 digits) # Repeat the new programming

code #

(3)Recording the User ID card

(Assign a number of any 3 digits as the User Number for each User Card, the User Number is not allowed

to repeat use in the programming, keep the User Number as a record of an user)

PRESS KEY 1 Enter the User Number (3 digits) Read the User ID Card #

(When recording the User ID Card, should note if the recording is successful and the indicating amber LED

show 2 flash and buzzer sound 2 beeps, signifying acceptance of the entry)

NOTE: If continue to record more User ID Cards, at the end of each recording, it is no necessary to

press key # per each time, to repeat above steps, until all User ID Card recording are finished.

Finally to press the key # to confirm all recordings are completed.

(4)Deleting the User ID Card

A. PRESS KEY 2 0000 # (Deleted all the User ID Cards)

B. PRESS KEY 21 Read the User ID Card to be deleted # (Deleted the User ID Card)

C. PRESS KEY 21 Enter the User Number of the User ID Card to be deleted # (Deleted the User ID

Card of the User Number)

(5)Programming the open-door mode

A.PRESS KEY 3 00 # (Open door by User ID Card)

B.PRESS KEY 3 01 # (Open door by User ID Card or User Code)

C.PRESS KEY 3 02 # (Open door by User ID Card + User Code)

(6)Programming the door-open time

PRESS KEY 4 (01-99 seconds) # (Setting door-opening time 1-99 seconds)

NOTE: Factory setting Door-opening time is 3 seconds

(7)Recording the User Code

YLI YK-168 [2/4] Procedures of programming

Содержание

Похожие устройства