Dell XPS 13, 9360-3621 [51/92] Procedure

Replacing the I/O board

WARNING: Before working inside your computer, read the safety

information that shipped with your computer and follow the steps in

Before working inside your computer. After working inside your

computer, follow the instructions in After working inside your

computer. For more safety best practices, see the Regulatory

Compliance home page at

www.dell.com/regulatory_compliance.

Procedure

1 Slide the I/O board under the fan and align the screw holes on the I/O

board with the screw holes on the palm-rest assembly.

2 Align the screw hole on the display cable with the screw hole on the I/O

board.

3 Replace the screws that secure the I/O board to the palm-rest assembly.

4 Slide the I/O-board cable into the I/O board and close the latch to secure

the cable.

5 Slide the fingerprint-reader cable (optional) into the I/O board and close

the latch to secure the cable.

6 Connect the media-card reader cable to the I/O board.

7 Adhere the tape that secures the display cable to the I/O board.

Post-requisites

1 Replace the battery.

2 Replace the base cover.