Hyundai H-CMD4030 [12/45] Operation
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Hyundai H-CMD4030 [12/45] Operation

Hyundai H-CMD4030 [12/45] Operation
12
Operation
see Radio Operations below.
• AF: enable (ON) or disable (OFF) the AF
function. For more detail about this function
see Radio Operations below.
• TA: Seek/Alarm. In TA SEEK mode, the
unit will seek for traffic announcement program
when TA is pressed; in TA ALARM mode, no
TA/TP is displayed and the alarm is set off.
• Retune: 30S/60S. RETUNE refers to the
time period the unit allows for radio scan when
reception is interrupted. “30S” represents
a time period of 30 seconds and “60S”
represents a time period of 60 seconds.
• Mask: DPI/ALL. During MASK DPI mode,
the unit will mask only the AF which has
different PI, this is the default mode; during
MASK ALL mode, the unit will mask the AF
which has different PI and no RDS signal with
high field strength.
• TA volume: Adjust level of TA volume.
Picture setup page (only for video, image
playback)
• Mode: select picture mode (STD/Soft/
Bright/User).
• Bright: adjust brightness of the picture
0-50 (only in User mode).
• Color: adjust color of the picture 0-50 (only
in User mode).
• Contrast: adjust contrast of the picture
0-50 (only in User mode).
Equalizer setup page
• Mode: Select Pop, Rock, Classic, Jazz,
Flat or Off equalizer mode.
• Bass: Adjust the low-frequency level (only
in equalizer Off mode).
• Treble: Adjust the high-frequency level
(only in equalizer Off mode).
Audio setup page
• Balance: Adjust the balance between left
and right channels.
• Fader: Adjust the balance between front
and left channels.
• Loudness: Selecting loudness ON will
emphasize the low frequency output.
• Subwoofer: set the subwoofer on or off.
• Beep: Select ON (beep is heard at any
button pressing) or OFF (no beep).
Subwoofer
Connect a subwoofer to this unit using the
Subwoofer output of this unit. For subwoofer
operation an external amplifier is required.
AV in jack
AV jack is intended to receive audio and video
signals by connecting to external device.
Radio operations
Band selection
Press BND/RDM button on the RC or BAND
button on the panel to switch to the bands in
the following order: FM1 - FM2 - FM3 (OIRT) –
MW1 (AM1) - MW2 (AM2).
Manual/automatic tuning
• Manual tuning: Press and hold SEEK-
/SEEK+ buttons on the RC or panel to
enter manual tuning mode. MANUAL will be
displayed. Press these buttons repeatedly to
change the frequency upward or downward
step by step.
• Automatic tuning: Press SEEK-
/
SEEK+
buttons on the RC or on the panel
to start automatic seeking for an available radio
station downward or upward. After being found
the station will be played. To stop seeking,
press one of these buttons again.
Programming stations
• There are 6 numbered preset buttons on the
RC (1~6), with which you can store and recall
stations for each band (18 FM, 12 AM). Select a
station, then press and hold a preset button. The
station will be saved in the memory under the
corresponding number.
• You also can save stations in the memory
with MEM button on the front panel. When
the needed frequency is found, press MEM,

Содержание

Похожие устройства

Скачать