Kuppersberg SLIMLUX II 50 XG [9/24] Maintenance and cleaning
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Kuppersberg SLIMLUX II 50 XG [9/24] Maintenance and cleaning

Kuppersberg SLIMLUX II 50 XG [9/24] Maintenance and cleaning
9
ENGLISH TECHNICAL PASSPORT
Integrated extractor hood SLIMLUX II
7. MAINTENANCE AND
CLEANING
Before carrying out any cleaning
or maintenance activities, ensure that
the extractor is disconnected from the
mains.
To carry out cleaning and
maintenance, follow the Safety
Instructions.
There is a fi re risk if cleaning is
not carried out in accordance with the
instructions.
Filter cleaning
To withdraw the fi lters from their
locations release the anchoring points.
Clean the fi lter, either by putting it in
the dishwasher (see notes) or leaving
it standing in hot water to simplify
the removal of grease or, if wished, by
means of special sprays (protecting the
non metallic parts). Once clean, leave it
to dry.
Attention: the cooker hood will
not work until the main fi lter was
reinstalled.
Notes: cleaning in the dishwasher
with aggressive detergents may
blacken the surface of metallic parts,
without this affecting its gas retaining
properties.
N.B. The fi lter must be cleaned at
least once a month depending on how
often the extractor is used. It must be
remembered that grease is deposited in
the extractor when cooking, whether it
is switched on or not.
Cleaning of the extractor body
The use of warm (40
o
C approx.)
soapy water is recommended. A cloth
moistened in this water is used for
cleaning the extractor, paying special
attention to the grids. Afterwards, dry it
using a lint-free cloth.
Note:
Never use metallic scouring pads
or abrasive products that could damage
the surface.
Do not use scrapers with metallic
surfaces such as knives, scissors etc.
Activated charcoal fi lter
To install the charcoal fi lter, the
motor anchorage is made to coincide
with the anchor points of the activated
charcoal fi lter and turn it clockwise.
The carbon fi lter lasts from
three to six months depending on the
particular conditions of use.
The activated carbon fi lter can
neither be washed nor regenerated.
Once it is exhausted, it must be changed.
To replace exhausted fi lters with
new ones, withdraw the old one in the
reverse order to that of installation.
Changing Bulbs
Firstly it is important that the
mains are disconnected, and ensure the
bulbs that are to be replaced are not
hot.
Remove the light lens to expose
the extractable lamps.
The maximum bulbs power is 4
0W.

Содержание

Похожие устройства

Скачать