Kuppersberg TG 79 B [16/48] For hot plate burner

Kuppersberg TG 79 B [16/48] For hot plate burner
16
TECHNICAL PASSPORT ENGLISH
Gas hob
If the ame is gone when you release
the switch You should repeat the above
process. But this time press the switch
and hold for about 10 seconds.
WARNING;
Do not use burning system more
than 15 seconds. If the burner will not be
burned within such time or if the ame
will be cut for any reason whatsoever,
repeat burning process after waiting for
1 minute.
Closing the burners
Turn the control switch right-wise to
close the hob.
Flame Failure Device (FFD)
All burners on your hob are
equipped with Flame Failure Device
system against  ame extinguishing risk
(water ow, wind etc.) When the ame
was gone while the burner switch is
open such system will prevent cutting
of the gas supplied to the burner. If the
burning of the burner will be cut due
to safety, repeat the burning operation
by switching the burner switch to off
position.
Figure 8.
7.2.2. FOR HOT-PLATE BURNER
Warnings
Before use of electrical plate
the plate should be elevated to the
maximum level and rest it for 5 minutes
without putting any container thereon.
It is Ok if any smell or smoke will
rise from the plate. Such effects shall
disappear after starting normal use.
After such rst use do not operate
the electrical plate without any
container thereon.
Use the containers with the bottoms
being thick and suitable for the plate
size. Never use smaller sole containers.
Pay attention that no liquid and wet
containers will be placed on the plate.
Avoid any contact of any vinegar,
salt, lemon juice etc. with the plate. Do
not use any spatula and similar sharp
objects in cleaning of joints between the
glass and metal surfaces or aluminum
parts on the hob.
7.3. BASIC SETTINGS
Power control switch
Electrical plate is managed with
a switch with which you may select
proper power for the food you will cook.

Содержание

Скачать