Hitachi CM 5 SB [10/54] English
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Hitachi CM 5 SB [10/54] English

Hitachi CM 5 SB [10/54] English
9
English
(2) Use the auxiliary hexagonal wrench or small
screwdriver to pull up the edge of the spring that
is holding down the carbon brush. Remove the edge
of the spring toward the outside of the brush holder.
(3) Remove the end of the pig-tail on the carbon brush
from the terminal section of brush holder and then
remove the carbon brush form the brush holder.
<Assembly>
(1) Insert the end of the pig-tail of the carbon brush
in the terminal section of brush holder.
(2) Insert the carbon brush in the brush holder.
(3) Use the auxiliary hexagonal wrench or small
screwdriver to return the edge of the spring to the
head of the carbon brush.
(4) Mount the tail cover and tighten the D4 tapping
screw.
7. Service parts list
A: Item No.
B: Code No.
C: No. Used
D: Remarks
CAUTION
Repair, modification and inspection of Hitachi Power
Tools must be carried out by an Hitachi Authorized
Service Center.
This Parts List will be helpful if presented with the
tool to the Hitachi Authorized Service Center when
requesting repair or other maintenance.
In the operation and maintenance of power tools,
the safety regulations and standards prescribed in
each country must be observed.
MODIFICATIONS
Hitachi Power Tools are constantly being improved
and modified to incorporate the latest technological
advancements.
Accordingly, some parts (i.e. code numbers and/or
design) may be changed without prior notice.
GUARANTEE
We guarantee Hitachi Power Tools in accordance with
statutory/country specific regulation. This guarantee does
not cover defects or damage due to misuse, abuse, or
normal wear and tear. In case of complaint, please send
the Power Tool, undismantled, with the GUARANTEE
CERTIFICATE found at the end of this Handling instruction,
to a Hitachi Authorized Service Center.
NOTE
Due to HITACHI’s continuing program of research and
development, the specifications herein are subject to
change without prior notice.
Information concerning airborne noise and vibration
The measured values were determined according to
EN60745 and declared in accordance with ISO 4871.
Measured A-weighted sound power level: 106 dB (A).
Measured A-weighted sound pressure level: 95 dB (A).
Uncertainty KpA: 3 dB (A).
Wear ear protection.
Vibration total values (triax vector sum) determined
according to EN60745.
Vibration emission value
ah = 4.2 m/s
2
Uncertainty K = 1.5 m/s
2
WARNING
䡬 The vibration emission value during actual use of
the power tool can differ from the declared value
depending on the ways in which the tool is used.
䡬 To identify the safety measures to protect the
operator that are based on an estimation of exposure
in the actual conditions of use (taking account of
all parts of the operating cycle such as the times
when the tool is switched off and when it is running
idle in addition to the trigger time).
01Eng_CM5SM_EE 12/13/07, 18:439

Содержание

Похожие устройства

English 2 Use the auxiliary hexagonal wrench or small screwdriver to pull up the edge of the spring that is holding down the carbon brush Remove the edge of the spring toward the outside of the brush holder 3 Remove the end of the pig tail on the carbon brush from the terminal section of brush holder and then remove the carbon brush form the brush holder Assembly 1 Insert the end of the pig tail of the carbon brush in the terminal section of brush holder 2 Insert the carbon brush in the brush holder 3 Use the auxiliary hexagonal wrench or small screwdriver to return the edge of the spring to the head of the carbon brush 4 Mount the tail cover and tighten the D4 tapping screw 7 Service parts list A Item No B Code No C No Used D Remarks CAUTION Repair modification and inspection of Hitachi Power Tools must be carried out by an Hitachi Authorized Service Center This Parts List will be helpful if presented with the tool to the Hitachi Authorized Service Center when requesting repair or other maintenance In the operation and maintenance of power tools the safety regulations and standards prescribed in each country must be observed MODIFICATIONS Hitachi Power Tools are constantly being improved and modified to incorporate the latest technological advancements Accordingly some parts i e code numbers and or design may be changed without prior notice GUARANTEE We guarantee Hitachi Power Tools in accordance with statutory country specific regulation This guarantee does not cover defects or damage due to misuse abuse or normal wear and tear In case of complaint please send the Power Tool undismantled with the GUARANTEE CERTIFICATE found at the end of this Handling instruction to a Hitachi Authorized Service Center NOTE Due to HITACHI S continuing program of research and development the specifications herein are subject to change without prior notice 9 Information concerning airborne noise and vibration The measured values were determined according to EN60745 and declared in accordance with ISO 4871 Measured A weighted sound power level 106 dB A Measured A weighted sound pressure level 95 dB A Uncertainty KpA 3 dB A Wear ear protection Vibration total values triax vector sum determined according to EN60745 Vibration emission value ah 4 2 m s2 Uncertainty K 1 5 m s2 WARNING O The vibration emission value during actual use of the power tool can differ from the declared value depending on the ways in which the tool is used O To identify the safety measures to protect the operatorthat are based on an estimation of exposure in the actual conditions of use taking account of all parts of the operating cycle such as the times when the tool is switched off and when it is running idle in addition to the trigger time

Скачать