Home
Главная
Hotpoint-Ariston
Стиральная Машина
ECOT7D 1492
Инструкция по эксплуатации Страница: 4

Hotpoint-Ariston ECOT7D 1492 [4/72] Care and maintenance

To access the pre-chamber:

1. using a screwdriver,

remove the cover pa-

nel on the lower front

part of the washing

machine (see figure);

2. unscrew the lid by

rotating it anti-clockwi-

se (see figure): a little

water may trickle out.

This is perfectly nor-

mal;

3. clean the inside tho-

roughly;

4. screw the lid back

on;

5. reposition the panel,

making sure the hooks

are securely in place

before you push it onto

the appliance.

Checking the water inlet hose

Check the inlet hose at least once a year. If there

are any cracks, it should be replaced immedia-

tely: during the wash cycles, water pressure is

very strong and a cracked hose could easily

split open.

! Never use second-hand hoses.

Care and maintenance

Cutting off the water and electricity

supplies

• Turn off the water tap after every wash cycle.

This will limit wear on the hydraulic system in-

side the washing machine and help to prevent

leaks.

• Unplug the washing machine when cleaning it

and during all maintenance work.

Cleaning the washing machine

The outer parts and rubber components of the

appliance can be cleaned using a soft cloth

soaked in lukewarm soapy water. Do not use

solvents or abrasives.

Caring for the door and drum of

your appliance

• Always leave the porthole door ajar in order to

prevent unpleasant odours from forming.

Cleaning the pump

The washing machine is fitted with a self-cleaning

pump which does not require any maintenance.

Sometimes, small items (such as coins or buttons)

may fall into the pre-chamber which protects the

pump, situated in its bottom part.

! Make sure the wash cycle has finished and

unplug the appliance.

How to clean the detergent dispenser

Fig. 1 Fig. 2

Cleaning:

Then clean the dispenser under a tap (fig. 3)

using an old toothbrush and, once the pair of

siphons inserted in the top of compartments

1 and 2 (fig. 4) have been pulled out, check

whether the same are not clogged and then

rinse them.

Reassembly:

Do not forget to rein-

sert the pair of siphons

into the special housings

and then to replace the

dispenser into its seat,

clicking it into place (fig.

4, 2 and 1).

Disassembly:

Press lightly on the

large button on the

front of the detergent

dispenser and pull it

upwards (fig. 1).

Fig. 3

Fig. 4

Содержание

Похожие устройства

Care and maintenance GB Cutting off the water and electricity supplies To access the pre chamber 1 using a screwdriver remove the cover pa nel on the lower front part of the washing machine see figure 2 unscrew the lid by rotating it anti clockwi se see figure a little water may trickle out This is perfectly nor mal Turn off the water tap after every wash cycle This will limit wear on the hydraulic system in side the washing machine and help to prevent leaks Unplug the washing machine when cleaning it and during all maintenance work Cleaning the washing machine The outer parts and rubber components of the appliance can be cleaned using a soft cloth soaked in lukewarm soapy water Do not use solvents or abrasives 3 clean the inside tho roughly 4 screw the lid back on 5 reposition the panel making sure the hooks are securely in place before you push it onto the appliance Caring for the door and drum of your appliance Always leave the porthole door ajar in order to prevent unpleasant odours from forming Cleaning the pump The washing machine is fitted with a self cleaning pump which does not require any maintenance Sometimes small items such as coins or buttons may fall into the pre chamber which protects the pump situated in its bottom part Make sure the wash cycle has finished and unplug the appliance Checking the water inlet hose Check the inlet hose at least once a year If there are any cracks it should be replaced immedia tely during the wash cycles water pressure is very strong and a cracked hose could easily split open Never use second hand hoses How to clean the detergent dispenser Disassembly Cleaning Reassembly Press lightly on the large button on the front of the detergent dispenser and pull it upwards fig 1 Then clean the dispenser under a tap fig 3 using an old toothbrush and once the pair of siphons inserted in the top of compartments 1 and 2 fig 4 have been pulled out check whether the same are not clogged and then rinse them Do not forget to rein sert the pair of siphons into the special housings and then to replace the dispenser into its seat clicking it into place fig Fig 4 4

Скачать