![Sony SLV-E180EG [3/44] Warning](/img/pdf.png)
Sony SLV-E180EG [3/44] Warning
![Sony SLV-E180EG [3/44] Warning](/views2/1029761/page3/bg3.png)
Introduction
2
WARNING
To prevent fire or shock hazard, do not expose
the unit to rain or moisture.
To avoid electrical shock, do not open the
cabinet. Refer servicing to qualified personnel
only.
The mains lead must be changed only at a
qualified service shop.
Precautions
Safety
• This unit operates on 220 – 240 V AC, 50 Hz.
Check that the unit’s operating voltage is
identical with your local power supply.
• If anything falls into the cabinet, unplug the
unit and have it checked by qualified
personnel before operating it any further.
• The unit is not disconnected from the mains
as long as it is connected to the mains, even
if the unit itself has been turned off.
• Unplug the unit from the mains if you do
not intend to use it for an extended period of
time. To disconnect the lead, pull it out by
the plug, never by the lead.
Installing
• Allow adequate air circulation to prevent
internal heat buildup.
• Do not place the unit on surfaces (rugs,
blankets, etc.) or near materials (curtains,
draperies) that may block the ventilation
slots.
• Do not install the unit near heat sources
such as radiators or air ducts, or in a place
subject to direct sunlight, excessive dust,
mechanical vibration or shock.
• Do not install the unit in an inclined
position. It is designed to be operated in a
horizontal position only.
• Keep the unit and cassettes away from
equipment with strong magnets, such as
microwave ovens or large loudspeakers.
• Do not place heavy objects on the unit.
• If the unit is brought directly from a cold to
a warm location, moisture may condense
inside the VCR and cause damage to the
video head and tape. When you first install
the unit, or when you move it from a cold to
a warm location, wait for about one hour
before operating the unit.
Caution
Television programmes, films, video tapes and
other materials may be copyrighted.
Unauthorized recording of such material may
be contrary to the provisions of the copyright
laws. Also, use of this recorder with cable
television transmission may require
authorization from the cable television
transmitter and/or programme owner.
Compatible colour systems
• This VCR is designed to record and play
back using the PAL and MESECAM colour
systems (TV systems B/G and D/K) and
play back using the NTSC 4.43 colour
system. Recording of video sources based
on other colour systems cannot be
guaranteed.
• Tapes recorded with the NTSC colour
system can be played back on this unit using
a TV or a colour monitor for the PAL colour
system.
Содержание
- E f g h i j k 1
- T u v w x y z 1
- Operating instructions 2
- Slv e180eg slv e177eg 2
- Video cassette recorder 2
- Caution 3
- Compatible colour systems 3
- Installing 3
- Introduction 3
- Precautions 3
- Safety 3
- Warning 3
- Additional information 4
- Additional operations 4
- Basic operations 4
- Getting started 4
- Table of contents 4
- Checking your model name 5
- Step 1 5
- Unpacking 5
- Inserting the batteries 6
- Setting up the remote commander 6
- Step 2 6
- Using the remote commander 6
- Step 2 setting up the remote commander continued 7
- Tv control buttons 7
- Additional connection 8
- Connecting the vcr 8
- Step 3 8
- Step 4 9
- Tuning your tv to the vcr 9
- Setting up the vcr with the auto set up function 11
- Step 5 11
- Setting the clock 13
- Step 6 13
- Getting started 14
- Note the menu disappears automatically if you don t proceed for more than a few minutes 14
- Press ok 14
- Press to start the clock 14
- The day of the week is set automatically 14
- To select the digits 14
- Manual setup selecting a language 15
- Manual setup presetting channels 16
- Manual setup presetting channels continued 17
- Press prog to select the programme position 17
- Press repeatedly until the channel you want is displayed 17
- The channels appear in the following order 17
- To move the cursor to channel set 17
- Disabling unwanted programme positions 18
- If the picture is not clear 18
- Insert a tape 19
- Playing a tape 19
- Press æ play 19
- The vcr turns on and starts playing automatically if you insert a tape with its safety tab removed 19
- Turn on your tv and set it to the video channel 19
- When the tape reaches the end it will rewind automatically 19
- Additional tasks 20
- Basic operations 20
- During playback press replay up to four times the vcr rewinds the tape about 10 seconds on the counter for each press of the button and restarts playback 20
- To display the counter on the tv screen press display 20
- To play an ntsc recorded tape set ntsc pb at the rear of the vcr according to the colour system of your tv 20
- To replay a recently watched scene you can immediately rewind and playback the scene you want to watch again 20
- To use the time counter at the point on the tape that you want to find later press counter reset the counter in the display window resets to 0 00 00 search for the point afterwards by referring to the counter 20
- Playing a tape continued 21
- Basic operations 22
- Insert a tape with its safety tab in place 22
- Press input select until a programme position number appears in the display window 22
- Recording tv programmes 22
- Turn on your tv and set it to the video channel 22
- Recording tv programmes continued 23
- Basic operations 24
- Press tv video to turn off the video indicator in the display window if the tv is connected to the vcr using only the aerial cable skip this step 24
- Select another programme position on the tv 24
- To save a recording to prevent accidental erasure break off the safety tab as illustrated to record on a tape again cover the tab hole with adhesive tape 24
- To watch another tv programme while recording 24
- Recording tv programmes using the timer 25
- Recording tv programmes using the timer continued 27
- To change the indication in reverse order 27
- Playing searching at various speeds 28
- To resume normal playback press æ play 28
- Recording tv programmes using the quick timer 29
- Using the quick timer during stop mode 29
- Checking changing cancelling timer settings 30
- Checking changing cancelling timer settings continued 31
- About optimum picture control opc 32
- Adjusting the picture 32
- Adjusting the tracking 32
- Changing menu options 33
- Other options 34
- Video options 34
- Connecting to record on this vcr 35
- Editing with another vcr 35
- Operation when recording on this vcr 35
- To stop editing press the p stop buttons on both vcrs 36
- Symptoms caused by contaminated video heads 37
- Troubleshooting 37
- Troubleshooting continued 39
- Additional information 40
- General 40
- Inputs and outputs 40
- Specifications 40
- Supplied accessories 40
- System 40
- 2 3 5 4 41
- 9 8 7 6 41
- Front panel 41
- Index to parts and controls 41
- 2 3 4 5 42
- Display window 42
- Index to parts and controls continued 43
- Rear panel 43
- Remote commander 44
Похожие устройства
- Scarlett SC-2152 Инструкция по эксплуатации
- Sony SLV-E180EE Инструкция по эксплуатации
- Xoro HSD 304 Инструкция по эксплуатации
- Makita GA9020 SF Инструкция по эксплуатации
- Levenhuk 870T тринокуляр Инструкция по эксплуатации
- Sony SLV-AV100UX Инструкция по эксплуатации
- Zanussi ZDS 699 Инструкция по эксплуатации
- Makita 9555 HN Инструкция по эксплуатации
- Levenhuk D870T тринокуляр Инструкция по эксплуатации
- Sony SLV-795HF Инструкция по эксплуатации
- Samsung WF6520S9C Инструкция по эксплуатации
- Levenhuk Rainbow 2L Blue Инструкция по эксплуатации
- Makita GD 0800 C Инструкция по эксплуатации
- Rolsen C21SR74S Инструкция по эксплуатации
- Sony SLV-761HF Инструкция по эксплуатации
- Siemens WM16Y890OE Инструкция по эксплуатации
- Levenhuk Rainbow 2L Pink Инструкция по эксплуатации
- Makita 9558 HN Инструкция по эксплуатации
- Sony SLV-760HFPX Инструкция по эксплуатации
- Olympus C-2 Инструкция по эксплуатации