![Sony SLV-E180EG [37/44] Troubleshooting](/img/pdf.png)
Sony SLV-E180EG [37/44] Troubleshooting
![Sony SLV-E180EG [37/44] Troubleshooting](/views2/1029761/page37/bg25.png)
36
Additional Information
Symptom
The ON/STANDBY switch
does not function.
The power is turned on but the
VCR does not operate.
The clock has stopped and
“–:– –” lights in the display
window.
The playback picture does not
appear on the TV screen.
The picture is not clear.
The picture rolls vertically
during picture search.
The picture has no sound.
Troubleshooting
If you have any questions or problems not covered below, please consult your
nearest Sony service facility.
Power
Clock
Additional Information
Playback
Symptoms caused by contaminated video heads
• Normal picture
• Rough picture
• Unclear picture
• No picture (or
black & white
screen appears)
Remedy
• Connect the mains lead to mains securely.
• Moisture condensation occurs. Turn the power off,
unplug the mains lead and leave the VCR to dry for
over one hour.
• The clock stops if the VCR is disconnected from the
mains for more than an hour. Reset the clock (and
timer).
• Make sure the TV is set to the video channel. If you are
using a monitor, set it to video input.
• Adjust the tracking with the TRACKING +/– buttons.
• The video heads are dirty (see below). Clean the video
heads using the Sony T-25CLD, E-25CLDR, or T-
25CLW video head cleaning cassette. If these cleaning
cassettes are not available in your area, have the heads
cleaned at your nearest Sony service facility (a
standard service charge will be required). Do not use a
commercially available liquid-type cleaning cassette
other than Sony’s, as it may damage the video heads.
• The video heads may have to be replaced. Consult
your local Sony service facility for more information.
• Adjust the vertical hold control on the TV or monitor.
• The tape is defective. Use a new tape.
terminal
initial contamination
Содержание
- E f g h i j k 1
- T u v w x y z 1
- Operating instructions 2
- Slv e180eg slv e177eg 2
- Video cassette recorder 2
- Caution 3
- Compatible colour systems 3
- Installing 3
- Introduction 3
- Precautions 3
- Safety 3
- Warning 3
- Additional information 4
- Additional operations 4
- Basic operations 4
- Getting started 4
- Table of contents 4
- Checking your model name 5
- Step 1 5
- Unpacking 5
- Inserting the batteries 6
- Setting up the remote commander 6
- Step 2 6
- Using the remote commander 6
- Step 2 setting up the remote commander continued 7
- Tv control buttons 7
- Additional connection 8
- Connecting the vcr 8
- Step 3 8
- Step 4 9
- Tuning your tv to the vcr 9
- Setting up the vcr with the auto set up function 11
- Step 5 11
- Setting the clock 13
- Step 6 13
- Getting started 14
- Note the menu disappears automatically if you don t proceed for more than a few minutes 14
- Press ok 14
- Press to start the clock 14
- The day of the week is set automatically 14
- To select the digits 14
- Manual setup selecting a language 15
- Manual setup presetting channels 16
- Manual setup presetting channels continued 17
- Press prog to select the programme position 17
- Press repeatedly until the channel you want is displayed 17
- The channels appear in the following order 17
- To move the cursor to channel set 17
- Disabling unwanted programme positions 18
- If the picture is not clear 18
- Insert a tape 19
- Playing a tape 19
- Press æ play 19
- The vcr turns on and starts playing automatically if you insert a tape with its safety tab removed 19
- Turn on your tv and set it to the video channel 19
- When the tape reaches the end it will rewind automatically 19
- Additional tasks 20
- Basic operations 20
- During playback press replay up to four times the vcr rewinds the tape about 10 seconds on the counter for each press of the button and restarts playback 20
- To display the counter on the tv screen press display 20
- To play an ntsc recorded tape set ntsc pb at the rear of the vcr according to the colour system of your tv 20
- To replay a recently watched scene you can immediately rewind and playback the scene you want to watch again 20
- To use the time counter at the point on the tape that you want to find later press counter reset the counter in the display window resets to 0 00 00 search for the point afterwards by referring to the counter 20
- Playing a tape continued 21
- Basic operations 22
- Insert a tape with its safety tab in place 22
- Press input select until a programme position number appears in the display window 22
- Recording tv programmes 22
- Turn on your tv and set it to the video channel 22
- Recording tv programmes continued 23
- Basic operations 24
- Press tv video to turn off the video indicator in the display window if the tv is connected to the vcr using only the aerial cable skip this step 24
- Select another programme position on the tv 24
- To save a recording to prevent accidental erasure break off the safety tab as illustrated to record on a tape again cover the tab hole with adhesive tape 24
- To watch another tv programme while recording 24
- Recording tv programmes using the timer 25
- Recording tv programmes using the timer continued 27
- To change the indication in reverse order 27
- Playing searching at various speeds 28
- To resume normal playback press æ play 28
- Recording tv programmes using the quick timer 29
- Using the quick timer during stop mode 29
- Checking changing cancelling timer settings 30
- Checking changing cancelling timer settings continued 31
- About optimum picture control opc 32
- Adjusting the picture 32
- Adjusting the tracking 32
- Changing menu options 33
- Other options 34
- Video options 34
- Connecting to record on this vcr 35
- Editing with another vcr 35
- Operation when recording on this vcr 35
- To stop editing press the p stop buttons on both vcrs 36
- Symptoms caused by contaminated video heads 37
- Troubleshooting 37
- Troubleshooting continued 39
- Additional information 40
- General 40
- Inputs and outputs 40
- Specifications 40
- Supplied accessories 40
- System 40
- 2 3 5 4 41
- 9 8 7 6 41
- Front panel 41
- Index to parts and controls 41
- 2 3 4 5 42
- Display window 42
- Index to parts and controls continued 43
- Rear panel 43
- Remote commander 44
Похожие устройства
- Scarlett SC-2152 Инструкция по эксплуатации
- Sony SLV-E180EE Инструкция по эксплуатации
- Xoro HSD 304 Инструкция по эксплуатации
- Makita GA9020 SF Инструкция по эксплуатации
- Levenhuk 870T тринокуляр Инструкция по эксплуатации
- Sony SLV-AV100UX Инструкция по эксплуатации
- Zanussi ZDS 699 Инструкция по эксплуатации
- Makita 9555 HN Инструкция по эксплуатации
- Levenhuk D870T тринокуляр Инструкция по эксплуатации
- Sony SLV-795HF Инструкция по эксплуатации
- Samsung WF6520S9C Инструкция по эксплуатации
- Levenhuk Rainbow 2L Blue Инструкция по эксплуатации
- Makita GD 0800 C Инструкция по эксплуатации
- Rolsen C21SR74S Инструкция по эксплуатации
- Sony SLV-761HF Инструкция по эксплуатации
- Siemens WM16Y890OE Инструкция по эксплуатации
- Levenhuk Rainbow 2L Pink Инструкция по эксплуатации
- Makita 9558 HN Инструкция по эксплуатации
- Sony SLV-760HFPX Инструкция по эксплуатации
- Olympus C-2 Инструкция по эксплуатации