Nikon Prostaff 7 2.5-10X42 Matt [6/14] Maintenance
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Nikon Prostaff 7 2.5-10X42 Matt [6/14] Maintenance

Nikon Prostaff 7 4-16X42SF Matt [6/14] Maintenance
10
En
11
En
(4) Zero setting of adjustment turret
The elevation adjustment and windage adjustment turrets have a retracting system. After the reticle has been adjusted to match the point of impact, pull up the elevation adjustment or windage adjustment turret
to disengage. The turret can now be turned freely. Align the zero number to the index line to set the zero setting, and then release the turret. The turret automatically retracts to the original position.
(5) Adjustable side focus
The PROSTAFF 7 Riflescope 3-12×42 SF, 4-16×42 SF, 4-16×50 SF can be more precisely focused within the range of at least 45.72 m (50 yd) to infinity by rotating the side focus adjustment.
Parallax can be eliminated and sight alignment will be accurate.
Use its distance scale as a reference guide.
Note:
• The windage and elevation scales of the PROSTAFF 7 Riflescope 2.5-10×42, 2.5-10×50, 3-12×42 SF, 4-16×42 SF, and 4-16×50 SF are calibrated in divisions of 1/4 minute of angle with a click at intervals of 1/4
minute of angle (1 division).
• When adjusting the reticle to the point of aim, remember that 1 minute of angle equals approximately 2.54 cm (1 in) at 91.44 m (100 yd).
Therefore, if the impact point is 5.08 cm (2 in) low and 2.54 cm (1 in) right at 91.44 m (100 yd) Parallax Setting, you should adjust 2 minutes of angle up and 1 minute of angle left.
In the case of 45.72 m (50 yd) Parallax Setting, the adjusting value is 2×. In the case of 68.58 m (75 yd) Parallax Setting, the adjusting value is 1.5×.
Maintenance
(1) Lens cleaning
To remove dirt or fingerprints, soak gauze or lens cleaning paper (silicon-free paper sold at camera retailers) with a small quantity of absolute alcohol (available from drugstores) and lightly wipe off the affected
areas.
Wiping with a handkerchief or leather may damage the lens surface and is not recommended.
Dust may scratch the lens surface or corrode the lens.
Brush dust off using a soft oil-free brush.
(2) Scope exterior
Use a soft dry cloth to wipe off any dirt or fingerprints that might accumulate.
It is not necessary to oil the scope's surface.
(3) Windage/elevation adjustments
These adjustments are permanently lubricated. Do not attempt to lubricate them. Cover them with the caps supplied, except when adjusting them, to keep out dust and dirt.

Содержание

Похожие устройства

Скачать