ORAS Electra 6100 [11/48] Cleaning the filter see figures 1 and 2

Cleaning the Filter (see Figures 1 and 2)

If the water ﬂow has decreased, this may be because the ﬁlter is clogged. Clean the ﬁlter as follows:

– Shut off the water supply to the faucet.

– Remove the connecting hose (7) from the control box.

– Unscrew the connecting nipple (8) and remove the strainer from the nipple.

– Clean the strainer under running water.

– Reassemble the parts.

Troubleshooting

Symptom Cause / Solution

Water ﬂow from the outlet – The sensing range is too low

does not stop, or stops – Check that the photocell is clean

after 40 seconds – The solenoid valve is damaged

Water ﬂow is low and weak – Filter is clogged

No water comes out of the faucet – Check the water supply to the control box

– The solenoid valve is damaged

– Power failure

– The sensor is covered or damaged

– Check the fuse (17) inside the control box:

6100: 0.1 A

6130: 1 A

11 (48)