Gorenje JC803O [13/42] Preparing for use
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Gorenje JC803O [13/42] Preparing for use

Gorenje JC803O [13/42] Preparing for use
13
This appliance is marked according to the
European directive 2002/96/EC on Waste Electrical
and Electronic Equipment (WEEE). This guideline
is the frame of a European-wide validity of return
and recycling on Waste Electrical and Electronic
Equipment.
Preparing for use
Wash all detachable parts (see chapter
‘Cleaning’).
Place the juice collector in the appliance. To
place the pulp container, tilt it forwards
slightly. Insert the top end of the pulp container
first and then push home the bottom end.
To empty the pulp container while you are
juicing, switch off the appliance and carefully
remove the pulp container.
Note: Reassemble the empty pulp container
before you continue juicing.
Put the filter in the juice collector. Hold the lid
over the filter and lower it into position.
Make sure the filter is fitted securely onto the
driving shaft (‘click’).
Always check the filter before use. If you detect
any cracks or damage, do not use the
appliance.
Contact the nearest Gorenje service centre or
take the appliance to your dealer.
Snap the two clamps onto the lid to lock it into
place (‘click’).
Align the groove in the
pusher with the small protrusion on the inside
of the feeding tube and slide the pusher into the
feeding tube.
Make sure the clamps are locked. Put the lid on
the juice jug to avoid splattering. Place the juice
jug under the spout.
Using the appliance
The appliance only functions if all parts are
assembled properly and the lid is properly
locked in place with the clamps.
Wash the fruit and/or vegetables and cut them
into pieces that fit into the feeding tube.
Make sure the juice jug is placed under the
spout and the spout is in downward position.
Turn the control knob to setting 1 (low speed )
or 2 or 3 (normal speed) to switch on the
appliance.
Speed 1 is especially suitable for soft fruits and
vegetables such as watermelons, grapes,
tomatoes, cucumbers and raspberries.
Speed 2 or 3 is suitable for all kinds of fruits
and vegetables.
Put the pre-cut pieces in the feeding tube and
gently press them down towards the rotating
filter with the pusher.
Do not exert too much pressure on the pusher,
as this could affect the quality of the end result.
It could even cause the filter to come to a halt.
Never insert your fingers or an object into the
feeding tube.
After you have processed all ingredients and
the juice flow has stopped, switch off the
appliance and wait until the filter has stopped
rotating.
Push the spout upwards to prevent juice from
dripping out of the spout.
Slide the foam separator into the juice
jug and place the lid on the juice jug.
In this way, the foam stays behind in
the jug when you pour out the juice.

Содержание

Похожие устройства

Скачать