Gorenje SBR800HC [26/78] Blade unit
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Gorenje SBR800HC [26/78] Blade unit

Gorenje SBR800HC [26/78] Blade unit
25
In Brief
1. Sit the motor unit on a dry, firm, level surface.
2. Route the cable so it doesn’t overhang, and won’t
trip or catch.
3. Lower the jug on to the motor unit, then turn the jug
clockwise, to lock it in place.
4. Remove the lid.
5. Put the ingredients into the jug – don’t fill above the
mark max.
6. Put the lid on the jug.
Power up
Put the plug into the power socket. Switch on the
socket if needed.
Speed control
1. Press the speed control button for low speed (MIN)
or high (MAX) speed. Then press the on/off button.
2. Use low speed (MIN) for lighter applications, using
mainly liquid ingredients, and high speed (MAX)
for heavier applications, using mainly solid
ingredients.
3. Press the on/off button again and the motor shuts
off.
4. Press the button PULSE which will give you a
short burst at high speed, for more precise control.
It turns off automatically when you release the
button.
USING BLENDER:
1. Lower the jug to the motor unit, then turn the jug
clockwise, to lock it in place.
2. Pull the lid up and off the jug - it’s stiff, because of
the seal.
3. Put the ingredients into the jug - don’t fill above the
mark max.
4. Put the lid on the jug, and push it down to seal it.
5. Align the pips on the cap with the slits in the lid
opening, fit the cover over the hole, and turn
clockwise. Don’t run the blender without the cap.
6. To add ingredients while the motor is running:
a)turn the cap clockwise to unlock it, and lift it off
b) add the ingredients via the hole
c)replace the cap and turn it anti-clockwise to lock
it
7. Turn the jug anti-clockwise to unlock, and lift it off
the motor unit.
Crushing Ice
1. Fill the cup with ice (up to half or three quarters) or
4 to 6 cubes, and add 15ml (1 tbsp) of water.
2. Put the lid on the blender, then turn on function
PULSE for a few second or so.
3. Check the state of the ice.
4. Repeat if necessary
Care and Maintenance
1. Switch off and unplug before cleaning.
2. Wipe the outside of the motor unit with a clean
damp cloth.
3. Handwash the removable parts.
4. If you use a dishwasher, the harsh environment
inside the dishwasher will affect the surface
finishes.
5. The damage should be cosmetic only, and should
not affect the operation of the appliance.
Blade Unit
1. You may remove the blade unit for
cleaning.
2. This is best done with the jug upside
down.
3. Grip the jug handle with one hand.
4. Grip the bottom of the blade unit with the other
hand.
5. Turn the blade unit clockwise till it comes loose
from the jug base.
6. Carefully, pull it up and out of the bottom of the jug.
7. Wash the seal and blade unit in warm soapy
water, rinse and air dry.
8. Take great care with the blades – don’t handle
them directly, use a nylon washing-up brush.
9. Replace the seal round the blade unit.
10. Turn the blade unit upside down, and replace it in
the bottom of the jug base.
11. Turn the blade unit anti-clockwise to tighten it.
Using the processor
1. Unplug the appliance.
2. Fit the spindle to the top of the motor unit.
3. Lower the jug on to the motor unit, then turn the jug
clockwise, to lock it in place.
4. Choose the attachment you need.
With the Support
1. Use the chopper for pulverizing ingredients.
2. Use the mixer to mix ingredients together.
3. Use the creamer to thicken cream, to beat eggs,
and to cream eggs and sugar together.
4. Fit the attachment over the support, and slide it to
the bottom.
5. Lower the support into the centre of the jug, over
the spindle.
6. Put the ingredients into the jug - don’t fill it above
the mark max.
7. Hold the lid with the tube slightly behind the jug
handle, set it on the jug, then turn it clockwise, to
lock the tab into the top of the handle.
8. To add ingredients while the motor is running:
a)lift the pusher out of the tube
b)add the ingredients via the tube
c)replace the pusher

Содержание

Похожие устройства

Скачать