Liebherr WTI 2050 [9/12] Disposing of packaging
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Liebherr WTI 2050 [9/12] Disposing of packaging

Liebherr WTI 2050 [9/12] Disposing of packaging
Fig. 27
u
Check the fit of the door and readjust if necessary.
u
Tighten all screws.
u
Tighten the locknuts
Fig. 27 (14)
with the ring spanner
Fig. 27 (21)
while holding the adjusting bolts
Fig. 27 (17)
,
with a screwdriver.
u
Screw the equaliser trim
Fig. 27 (1)
from below using three
screws
Fig. 27 (22)
onto the cupboard ceiling.
u
Fix the appliance in the round hole at the bottom with the
second screw
Fig. 27 (8)
through the plastic bracket
Fig. 27 (10)
.
u
Snap covers into place.
u
Attach top cover
Fig. 28 (23)
and snap into
place.
u
Attach side cover
Fig. 28 (24)
, push it to the
limit and then press until it
audibly snaps into place.
u
Attach covers
Fig. 28 (25)
sideways, then draw them
forwards with a screwdriver
so that they snap into place
well.
Fig. 28
4.5 Disposing of packaging
WARNING
Danger of suffocation due to packing material and plastic film!
u
Do not allow children to play with packing material.
The packaging is made of recyclable materials:
-
corrugated board/cardboard
-
expanded polystyrene parts
-
polythene bags and sheets
-
polypropylene straps
-
nailed wooden frame with polyethylene panel*
u
Take the packaging material to an official collecting point.
4.6 Connecting the appliance
NOTICE
Risk of damage to the electronic control system!
u
Do
not
use
stand-alone
inverters
(conversion of d.c. to a.c./
three-phase) or energy saving plugs.
WARNING
Fire and overheating hazard!
u
Do not use extension cables or multiple socket outlets.
The type of current (alternating current) and voltage at the
installation
site
have
to
conform
with the data on the type plate
(see Appliance at a glance).
The socket must be properly earthed and fused. The tripping
current for the fuse must be between 10 A and 16 A.
The socket must be easily accessible so that the appliance can
be quickly disconnected from the supply in an emergency. It
must be outside the area of the rear of the appliance.
u
Check the electrical connection.
u
Plug in the power plug.
4.7 Switching on the appliance
u
Press On/Off button
Fig. 3 (9)
.
w
The temperature display and the alarm button flash until the
set temperature is reached.
5 Control
5.1 Brightness of the temperature
display
You can adjust the brightness of the temperature display to the
light conditions of the room in which the appliance is installed.
5.1.1 Adjusting the brightness
The brightness is adjustable between h1
and
h5 (maximum luminosity).
u
To activate the setting mode: press the fan button
Fig. 3 (10)
for about 5s.
w
The fan button
Fig. 3 (10)
flashes. The display indicates c.
u
Using the Up setting button, upper wine zone
Fig. 3 (8)
and
Down setting button, upper wine zone
Fig. 3 (7)
select h.
u
To confirm: briefly press the fan button
Fig. 3 (10)
.
u
To set the display brighter: press the Up setting
button, upper wine zone
Fig. 3 (8)
.
u
To set the display darker: press the Down setting
button, upper wine zone
Fig. 3 (7)
.
u
To confirm: briefly press the fan button
Fig. 3 (10)
.
w
The brightness is adjusted to the new value.
u
To
deactivate
the
setting
mode:
press the On/Off button
Fig. 3 (9)
.
-or-
u
Wait for 5 minutes.
w
The temperature is indicated again in the temperature
display.
5.2 Child proofing
The child-proofing function enables you to make
sure that the appliance is
not inadvertently switched
off by playing children.
5.2.1 Setting the child-proofing function
u
To activate the setting mode:
press the fan button
Fig. 3 (10)
for about 5s.
w
The fan button flashes. The display indicates c.
u
Briefly press the fan button
Fig. 3 (10)
to confirm.
Control
21

Содержание

Похожие устройства

Скачать