![Kuppersbusch EKI 307.1 M [15/15] Instructions for assembly](/img/pdf.png)
Kuppersbusch EKI 307.1 M [15/15] Instructions for assembly
![Kuppersbusch EKI 307.1 M [15/15] Instructions for assembly](/views2/1317325/page15/bgf.png)
Instructions for assembly
GB
31
Electrical connection
• The electrical connection must be carried out by a qualified
electrician who is authorised to carry out such work!
• Statutory regulations and the connection specifications issued
by the local power supply company must be strictly observed.
• When connecting the appliance it must be ensured that there
is a device which makes it possible to disconnect it from the
mains at all poles with a contact opening width of at least
3 mm. Line-protecting switches, fuses or contactors are
suitable cut-out devices. When connecting and repairing the
appliance disconnect it from the electricity supply with one of
these devices.
• The earth wire must be sufficiently long so that if the strain
relief fails, the live wires of the connecting cable are subjected
to tension before the earth wire.
• Any superfluous cable must be removed from the installation
area beneath the appliance.
• Make sure that the local mains voltage is the same as the
voltage on the rating label.
• The induction hob has been fitted with a temperature-resistant
connection cable in the factory.
• The connection cable must be at least H05 RR-F.
• If the excess cable of this appliance is damaged, it has to be
replaced by the manufacturer, the Customer service of the
manufacturer or by another qualified person to avoid danger.
• Full protection against accidental contact must be ensured on
installation.
• Attention: Incorrect connection may result in the power
electronics unit being destroyed.
Power supply
Mains voltage: 220 - 240V~, 50-60 Hz
Component rated voltage: 230 - 240V
Technical data
* Power when the power boost function is activated
Start of operation
Once the hob has been installed and the power supply has been
provided (mains connected) an automatic test of the controls will
be carried out and information for customer service will be
indicated.
Briefly wipe over the surface of the hob with a sponge and soapy
water and then dry with a clean cloth.
Dimensions
Hob height/ width/ depth mm 45 x 294 x 519
Cooking zones
rear Ø cm / kW
front Ø cm / kW
21/ 2.3 (3.2)*
14.5/ 1.4 (1.8)*
Hob, total kW 3.7
Содержание
- Bedienungsanweisung 1
- Eki 307 1
- Mit montageanweisungen 1
- Appliance description 20 2
- Cleaning and care 27 2
- Conditions of guarantee 2
- Correct use 2
- Disposing of old appliances 2
- Disposing of the packaging 2
- For your information 2
- Instructions for assembly 29 2
- Operation 21 2
- Safety instructions 19 2
- What to do if trouble occurs 28 2
- Concerning persons 3
- Concerning the hob 3
- Connection and operation 3
- Safety instructions 3
- Appliance description 4
- Automatic switch off button 3 4
- Minus button plus button 5 4
- On off button 8 4
- Operating the hob with the sensor buttons 4
- Power setting display 4 4
- Stop button 6 4
- Operating time limit 5
- Operation 5
- Other functions 5
- Pan recognition 5
- Protection against overheating 5
- The hob 5
- Cookware for induction hobs 6
- How to cut power consumption 6
- Operation 6
- Power settings 6
- Residual heat display 6
- This is how to establish the suitability of a pot 6
- Operating the buttons 7
- Operation 7
- Stop function 7
- Switching off a cooking zone 7
- Switching off the hob 7
- Switching on the hob and cooking zones 7
- Child safety device lock 8
- Operation 8
- Power boost setting cooking zones marked with a p 8
- Power management 8
- Automatic switch off timer 9
- Minute minder egg timer 9
- Operation 9
- Automatic boost function 10
- Keeping warm function 10
- Operation 10
- Cleaning after use 11
- Cleaning and care 11
- Glass ceramic hob 11
- Specific soiling 11
- Weekly clean 11
- An error code erxx or ex is indicated 12
- But there are some problems described below that you can fix yourself 12
- Does the cooling fan still operate after it has been switched off 12
- Does the hob have tears or cracks 12
- Error code e2 is indicated 12
- Error code u400 is indicated 12
- Is the cookware you are using making noises 12
- Is the hob making noises clicking or cracking sounds 12
- On thermal cut of 12
- Please note 12
- The fuses blow regularly 12
- The pot sign appears 12
- The pot sign still appears even though a pot or pan was placed on the hob 12
- The symbol will blink and a time limited continuous signal will sound 12
- What to do if trouble occurs 12
- You can t switch you induction hob on 12
- Installation 13
- Instructions for assembly 13
- Safety instructions for kitchen unit fitters 13
- Venilation 13
- Bracket 14
- Important 14
- Instructions for assembly 14
- There is a risk of breakage if the hob is canted or subjected to stress during installation 14
- Electrical connection 15
- Instructions for assembly 15
- Power supply 15
- Start of operation 15
- Technical data 15
Похожие устройства
- Liebherr CUP 2721 Инструкция по эксплуатации
- Liebherr ICN 3376 Инструкция по эксплуатации
- Liebherr ICUS 2924 Инструкция по эксплуатации
- Liebherr IG 956 Инструкция по эксплуатации
- Liebherr IG 956 Руководство по монтажу Liebherr IG 956 (англ.)
- Liebherr IG 1156 Инструкция по эксплуатации
- Saeco Rubino (с платежной системой и тумбой) Инструкция по эксплуатации
- Saeco Rubino (с платежной системой и тумбой) Каталог Saeco
- Saeco Aroma Compact SE 100 Инструкция по эксплуатации
- Saeco Aroma Compact SM 200 Инструкция по эксплуатации
- Saeco Aroma SE 300 (3 group) Инструкция по эксплуатации
- Saeco Aroma Compact SM 100 Инструкция по эксплуатации
- Saeco Aroma SE 400 (4 group) Инструкция по эксплуатации
- Saeco Aroma SM 300 (3 group) Инструкция по эксплуатации
- Saeco Aroma SE 200 (2 group) Инструкция по эксплуатации
- Liebherr ICUS 3324 Инструкция по эксплуатации
- Saeco Cristallo 400 Инструкция по эксплуатации
- Saeco Cristallo 400 Каталог Saeco
- Miele HM 16-83 Инструкция по эксплуатации
- Miele HM 16-83 Инструкция по уходу за мульдой и глажению