Smeg ALFA 135 VE [7/15] Instructions for the user

Instructions for the User

4. USING THE OVEN

4.1 Precautions and General Advice

When the oven is used for the first time, it should

be heated to the maximum temperature for long

enough to burn off any oily residues left by the

manufacturing process.

If you have to carry out any procedures on

foods, leave the door open for as short a time as

possible to ensure the temperautre inside the

oven does not drop far enough to impair cooking

results.

4.2 Setting the time

At first use, or after a power failure, the current time must be set. The

display will show the flashing numbers .

To set the current time, hold down START + STOP together until the

display stops flashing.

Now press or hold down START to increment the hour display. Once the

current hour has been set, press STOP to set the minutes and increment

them as before by pressing the START button.

When the correct time is set, press the STOP button and the display will

stop flashing.

4.3 Power setting

After having set the time as described above and pressed the STOP

button to confirm the setting, the display will show P8.3 (maximum power

absorption 8.3 kW) if the oven is connected to a three-phase power

supply, or P5.5 (maximum power absorption 5.5 kW) if the power supply is

single-phase.

Press START repeatedly to scroll thorugh the power absorption settings

available:

P8.3, P5.5 or P3.0 for three-phase power connection;

P5.5 or P3.0 for single-phase power connection.

After selecting the appropriate power, press STOP to confirm the setting.

N.B. This power setting operation only has to be carried out the first time

the oven is connected. The value set is saved and automatically used

whenever the oven is switched on after this. To modify this setting or the

time, press START + STOP together to return to the point described in

section “4.2 Setting the time”