Smeg CS19-7 — полное руководство по использованию варочной панели [14/50]

Превью страниц Страница 14 / 50

Instructions for the user

6. USING THE COOKING HOB

6.1 General warnings and advice

Before lighting the hob burners, check that the flame-spreader crowns are

correctly in place with their respective burner caps, making sure that the holes 1

in the flame-spreaders are aligned with the plugs 3 and thermocouples 2.

6.2 Lighting the hob burners

All the appliance's control and monitoring devices are located together on the

front panel. The burner controlled by each knob is shown next to the knob. The

appliance is equipped with an electronic lighter. Simply press the knob and turn

it anti-clockwise to the maximum flame symbol until the burner lights. If the

burner does not light in the first 15 seconds, turn the knob to “0” and wait 60

seconds before trying again. After lighting, keep the knob pressed down for a

few seconds to allow the thermocouple to heat up. The burner may go out when

the knob is released: in this case, the thermocouple has not heated up

sufficiently.

Wait a few moments and repeat the operation, keeping the knob pressed for

longer.

If the burners should go out accidentally, a safety device will be tripped, cutting

off the gas supply, even if the gas tap is open. In this case, turn the knob to the

OFF position and wait at least 60 seconds before trying to light the burner again.