Liebherr GKPv 1490 [6/9] Setting the temperature
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Liebherr GKPv 1490 [6/9] Setting the temperature

Liebherr GKPv 1470 [6/9] Setting the temperature
14
Operating and control elements
1ON/OFF button (toswitchtheapplianceonando)
2Temperature setting buttons
3Set button (Enter)
4Audible warningon/obutton
5Humidity function
6Display
Symbols in the display
Compressor is running
LEDashing-refrigerationunitswitchesonafteradelay.The
compressor will start automatically after the pressure in the
refrigerant circuit has equalised.
Fan is running
Appliance is defrosting
Alarm function
If appears in the display, the appliance has a fault. Consult
your nearest customer service point.
Switching the appliance on and o
Connect the appliance to the mains - the display reads OFF.
To switch the appliance on
Press the ON/OFF button for approx. 5 seconds so that
the temperature display lights up.
To switch the appliance o
Keep the ON/OFF button pressed for approx. 3 seconds - the
display reads OFF.
Setting the temperature
•Pressbutton 1 sec. The temperature display flashes.
•Toincreasethetemperature(warmer):pressbutton
.
•Toreducethetemperature(colder):pressbutton
.
•Pressbutton
again.
The desired temperature setting is saved.
Audible warning signal
- This sounds when the door has been left open for
longer than 240 seconds. The audible warning device
is switched off by pressing the Alarm button.
- It sounds when the interior gets too warm or too cold. The tem-
perature display will also flash. The audible warning signal is
switched off by pressing the Alarm button.
LED
on constantly. An error code (E0, E1, LO, HI, EE) will
appear in the display at the same time. Consult your nearest
customer service point.
If too large quantities of warm food are put in the appliance at the
same time or the door is left open for a long time, the temperature
willincreaseandLED
will light up (the display will read HI).
This does not mean that the appliance is faulty.
Checkthedisplayagainafterafewhours.Ifitisstillindicatingan
alarm, contact your customer service department.
Humidity function
Certainfoodsmustbestoredinahumidatmosphere(e.g.baked
goods).
To prevent such foods from drying out, the humidity
function must be activated.
• Pressbutton
for 2 seconds.
Use buttons
and to select the desired humidity setting
(high, medium, low).
= high
= medium
= low
•Pressbutton
.

Содержание

Похожие устройства

Скачать