Waring MMB160E WAR [8/36] Cleaning and sanitizing instructions

8. Allow motor to come to a complete stop before

removing container from blender base. Never place

the container on the motor base or remove it from

the motor base while motor is running.

9. Always hold container with one hand when starting and

while blending. Never operate without jar lid.

10. Wash and dry container after each use. See Cleaning

and Sanitizing Instructions.

11. Unplug to turn off all power to blender.

RESETTING THERMAL PROTECTION

• Yourblenderisequippedwithamanualresetswitchto

protect the motor from overheating.

• Ifyourblenderstopsrunningunderheavyuse,orifthe

GreenLEDlightstartstoblinkmuchmorerapidlythan

during normal blending, press the power switch to Off and

unplug the power cord. Empty the blender container of all

its contents and allow approximately 5 to 10 minutes for

the motor to cool down.

• Plugthepowercordbackintotheoutletandcontinue

blending.

• Ifyourblenderdoesnotfunctionproperlyfollowingthis

procedure, discontinue use and contact a certied Waring

Customer Service Center.

CLEANING AND SANITIZING INSTRUCTIONS

THE CONTAINER MUST BE CLEANED AND DRIED AFTER

EACHUSEOFTHEBLENDERACCORDINGTOTHE

FOLLOWINGINSTRUCTIONS.

FAILURETODOSOMAYALLOWRESIDUESOF

PROCESSED MATERIAL TO COLLECT ON THE INTERNAL

SEALSOFTHEBLADEASSEMBLY,RENDERINGTHEM

INEFFECTIVE.

• Wash,rinse,sanitizeanddrycontainerpriortoinitialuse

and whenever it will not be used again within a period of

1 hour.